Thankyouthankyouthankyou! I spent probably 30mins on trying to figure out how to reverse my elevator with my NX8 that I just got. This saved me big time! Thank you!

After many years of using Futaba, I just picked up the NX8 today as my my 1st ever Spektrum. Your video was very helpful - thanks.

Thank you for showing how to use my NX8 . Setup.

Been using old school Futaba Radio's my whole life for Nitro Flying. Getting back into R/C now that battery tech has come along and wow these new radios are awesome. I was hesitant on getting one of these until I found this video! EXTREMELY HELPFUL! THANK YOU! I'm going to order one!

New to the hobby and just received my NX 8. Fantastic video!! Helps a lot. Thank you

Thanks learned lots. And will keep watching.

Well done demo! Now I can set my sound switches and add my most used audio to a category of my choosing🤗

Great video, I switched to Futaba, but now switching to NX8. Thanks for sharing its made up my mind. Mike.

I recently got an NX8, which is my first programmable TX, and found myself frustrated selecting the sounds because of such a long list. Now I can set up my own category, having learned from this video, and save the frustration going forward. Thanks.

Great vid, it definitely is frustrating when there are so many features, buttons, knobs, switches and outlets for internet hook up and such. I’ve had a couple tx’s with so many features so just want say thank you for the vid. It will help out a lot. I’ve watched a few vids but some people just go through the features to fast and don’t explain things clearly. You did a awesome job showing and explaining and simplify what to do. Thank you

I have just set up my plane watching your tutorial , loving the Nx8 now (the second working one). thank you for your channel ( instruction manual may as well be in Mandarin ) best wishes

I’m new to the hobby, this was VERY informative. Thanks.

SUPER helpful video! Thanks SO much.

Great tutorials, I ma just getting into this, have bought a new NX8, seems like a I made a good choice but a lot to learn, Thanks

HUGE help with this video. I'm very new to the hobby and my new model (Eflite T28 1.1) is not listed on my NX8 so I have to program it manually. I was completely lost when asking for help from others. This video broke it down so that even a tech challenged person like me can understand.

Great video, just received NX8 last week and came across your video. A lot more complex than my DXs that came with the Aeroscout. Looking forward to better weather and get flying.

When I first bought my Spektrum NX8 my friend setup my settings for my A-10 and he went so fast, all the settings were perfect but I was lost I have played with the NX8 and sort of got it but thank you for the video now I understand, Again Thanks

you had me at NX 8 Setup and Bind

You know my DX6e....couple of weeks back it was on ....I was in the mancave farting around and it lost power and the screen went black. This DX6e uses four AA batteries. The batteries still showed...25 percent charge....if I recall...definitely showed some juice left. It uses batteries...good ones too. I also need to be careful when flying and not run out of juice in my transmitter....omg..... Nx8 needs to be my next serious purchase in this great hobby. Keep on Flying in the Free World !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

just got mine and have been setting up and importing my planes from my dx6 and it is looking great. gave you a sub and like bud!!

This is a great video! So detailed and my NX 8 is coming today, so can't wait to sit with this video and set-up at least one of my planes with this radio today to take to the field tomorrow! THanks for your attention to detail, but yet keeping it simple so a person can get started without the clutter of every single feature!

Very good saludos ✈

Thank you!

Maybe I'm prejudiced because you belong to FlyRC, but you did a nice presentation on the NX8 Setup (I have an NX10), I learned some things I didn't know. You're style of presenting was clear and just plain easy to watch. Suggestions for additional content? I've been dabbling with the newish Eachine mini warbird series lately and struggling with the setup for the Eachine TX16S open tx transmitter, seems my little T28 needs to be rebound for every flight. Others on the internet have experienced the same problem but at least on other reviewer used a Radiomaster TX16S and he didn't need to rebind with each flight. Not to pull you away from the Spektrum ecosystem, but it seems to me that at least for smaller, cheaper, RTF park fliers Eachine has come out with some other very interesting planes in the last year, including a 50mm F16 a few months ago, and an F18 just last week that Brian Phillips reviewed. These last two were PNP but the mini warbirds were all Eachine protocol and the standard transmitter they come with has a huge dead spot in the middle of the aileron/elevator stick which necessitates (?) use of the hobby grade Open TX transmitters which seem to fix that particular problem.

Thanks for explaining but the wifi settings was a pain but after 20min I was able to register my radio.

Great, thank you

I have a DX6e and now I’m stepping up to the NX8 you did a great job on your video I subscribed I was wondering is there any way of turning the volume up on that unit or down? I just ordered mine today so I’m trying to get educated before it gets here. Thanks, Bill

I would like to see more tutorials on the NX8 by you like how to setup retractable gear and flaps showing how to set them up to the Scale Aircraft and setting there proper speed settings, Thanks

Do I need to bind the NX 8 to the aircraft every time I change out the planes battery or is that just for the initial model setup? I used to have a DXS and it would connect to the aircraft without having to bind it every time. How do I get the NX 8 to do that? Im new to RC so I'm probably missing something obvious.

Thank for the video,help me a lot to bind and get my plane going.Got one question though,is there a volume for the sound ,i found it very low right now.

I have a NX8 and it stopped binding to my receiver. With the bind plug or by holding the switch at powerup. I haven't a clue how this happened as if it can't link with the NX8 anymore. Baffled.

Hello guys, I'm upgrading from my Tactic TTX650 Transmitter to a Spektrum probably NX8, does Spektrum AR620 receivers works and bins ok with NX8? or which ones do you recommend, I will appreciate your feedback.

Thanks The NX8 has a lot of capacity but I find it to be very user unfriendly. Just got it but I cannot seem to reverse servo throw. It was be helpful if you slowed down illustrating these functions some as us old school guys need time to figure this out. I only hope the radio turns out to be AR better than the customer service associated with this radio. Right now there is none.

Manny did you update your Firmware when I went into the wifi and connected a update popped up for the firmware 3.04 the old was 3.03 mine is now updated , there is a repair made to a glitch problem occurring with the older receivers and servos more. Your more help than Horizon Spektrum people.

When I get one will I have to update it right then only Wi-Fi I have is off of my phone I have a I hotspot? don't have a computer or Internet is this a problem when I first get it ,I have the Carbon Cub S2, Blade 230s ,330s, ect or do I just need to get a different one??

Great video. I have a DX-8 gen one and was thinking of upgrading to a NX 8 or !0. Can I put my planes on a sim card from my 8 and transfer them to a nx-8 or 10. If I can't I probally wont upgrade. My current radio works fine.

My freind I am going out of my mind with my nx 8 trying to set up a glider I want left stick (throttle) to do elevator and right stick to do rudder, but it's not happing please ee help (binded fine)

Did you put all your expo for dual rates on the same switch ? A E and R ?

How do I get the factory ones back by mistake did a factory reset on controller.

hello, i have the plane Carbon cub s2+ in rtf version... this was sold with a smart battery 2200 mah 11.1V 30C and the transmitters Spektrum DXS. now i want to bind with the universal transmitter NX8. i am enable to bind the plane but i receive also a warning message. How can i resolve that ? the warning message is : Warning Smart battery alarm battery not charged for flying volts : 12.2V

Hi buddy, I've been binding my models to the nx8, but have I have noticed in the model select screen they are in the list twice ...... Have you to noticed this too or am I doing something wrong ? 🤔

What do people use the knob for?

Help my wifi wont bind to my modem! None has got the instructions on what to do after entering the password!

Just got a NX10, can’t connect it with wifi to my Asus router. Error code 2 every time.

how to bind to a WS2000 dongle for flight sim software?

nx8 spektrum updates erase bnf template airplane names. Any one haveing this happen?

Hi

Annoyingly I have just returned the Nx8 as it was faulty. So waiting for another 🙄

oh yeah, seems easy enough on video, meanwhile in real life its aggravating. why wont my nx8 bind?

Would anyone like to purchase a brand-new Habu STS and a brand-new nx8

Where is the guide to use the idiotic password entry scheme? Videos are all worthless if I can't even set up the NX10.

Just got my NX6 after using a simple DXe and it is a steep learning curve for sure. The instructions don't make much sense to me so having videos like yours is a great help. I fly helicopters but your video was still helpful for the basics. Maybe an NX was overkill for me but now I have it I'd like to learn all the functions. Looking forward to any further NX videos you make!