Thank you ☺️🤝

Hi. Thanks for the opinion!

Thank you!. I'm glad you liked my work. I appreciate it 😊🤝

Thank you for your comments. Nice that you liked my works. I really appreciate that. Thank you! 😊🤝✌️

Thank you! Glad you liked it

Thanks Man ☺️🤝🤜

Thanks!😁🤝

Hi. Thanks for comment .This is what my client requested :) Thank you and I'm glad you liked it 🤝😊 🤜

Thanks! I'm glad you liked my montage ☺️🤝

Thanks so much!

Dziéki Brat! Thx! 🤝

Thanks Jack! 😊🤝🤜

Thanks a lot Vampi ! 🤗 Really nice to hear it 🤗 Thanks for your support. I appreciate it 😊🤝

👋 Thank you for your comment. I appreciate it. I'm glad you liked my work. Thank you! 🤗

Thanks Mate!☺️🤝

Gracias! 😁 Gracias por tus comentarios. 🤝😊✌️

Hi. As always thanks a lot for your comment 🤗 I really appreciate 🤝😊

Thanks so much! 😊🤝

Thanks for your comment! Nice that you liked it 😊🤝✌️

Gracias! I'm glad you liked my work 🤝😊 Kind regards. 🤜

Thanks a lot! 😊🤝

Thanks a lot! 😊🤝

Thanks!☺️🤝

Spasibo! 😊 I'm glad you liked my work 🤝 ✌️

Gracias! :) Nice that you liked my work. I invite you to subscribe and check out my other works;)

Spasibo😊🤝

Hej. Dzięki za opinię 😊🤝 Taaaa. ;) Jest przygoda:) Sporo już zrobiłem,ale w tym temacie często pojawiają się jakieś psikusy przy pracy:) Powodzenia! 😊🤝✌️

Thank you. I'm glad you liked my work. Thank you for your opinion ☺️🤝

Thanks so much! 😊✌️

Thanks a lot dude. I'm glad you liked my work. 😊🤝 I appreciate it and wish you good luck in creating your miniature world. You can show how you do. I'm curious. If you have any questions write. 🤜

Thanks a lot Maggie 😊🤝

@@magicwoodjewelry your welcome bestie 🥰🥰🥰🥰

Thank you! 😊🤝

Hi. Thanks for comment. Nice that you liked my work 🤝😊 I printed these on anycubic photon. Now i use photon ultra dlp

Txs for the reply! Pls continue sharing your inspiring ideas!

Hi John. Thanks 🤝 and sorry for the delay. Small break. This is burl wood. It is a disease that occurs on various types of trees. You can read about it here. en.wikipedia.org/wiki/Burl I buy them at home in Poland from my friends. Preferably wood after vacuum drying. You will also find them in your country at an auction or other place. Just remember that the wood for the resins must be dry 8 to 12% humidity. If you use wet wood, it will crack and bend while drying, and will release a lot of air bubbles when poured with resin. If you have any questions write. I will try to answer as soon as possible. Best regards! MW 🤝😊🤜

Hey, Thanks for subscribing ;) 1.Add a little perlescent powder dye to the resin. You can see here kzfaq.info/get/bejne/m9uIoaWbutPKfGw.html 2.Fish. This is shown in the video :) You can see here kzfaq.info/get/bejne/sNFioKynzZ26XXU.html I made a 3D model and printed it. 3. Acetone is used to clean the surface after sanding. It can also be used to degrease the surfaces. 4. Yes, this is real moss. Names reindeer moss and caribou moss.

@@magicwoodjewelry Highly appreciate your response. Looking forward to more videos.

Hi. Thanks for the opinion. I'm glad you liked it. I'm sorry, but I don't quite understand what you mean exactly. Air bubbles are not visible. I used a toothpick/stick to paint tiny fish that run away. What may look like air bubbles are tiny pearlescent dyes. I added a little bit of it to the resin.

Hi. Thanks for comment. When I add layers, I wait until the resin starts to gel. Then I can add figures. otherwise they would go to the bottom. If you add the resins at the right time, the lines should not be visible, but that doesn't matter. They are only visible from the side and top. They are covered by wood from the side. The lamp should look nice from the front and back:) you can see it clearly in the video when he adds figures/fish. By creating layers, you can achieve a cool effect by adding figures at different levels. You can also pour it all at once, but you must have resins for deep pouring and mount the figures on a transparent mounting first, as in this case kzfaq.info/get/bejne/it92g8deu53amXk.html

Privet. Spasibo! 🤝 About 0.7 l with hardener.

Hi. Thanks for comment ! Nice to hear it. The resin is really very good. Up to 10cm.One of the best I've worked on. I recommend . There's a link in the description if you want. Thanks again. Best regards.

@@magicwoodjewelry Thanks

@@jaimezapatagomez ☺️🤝✌️

Thanks for comment. It's a cool idea I have one such project but it's been lying unfinished for 2 years :) Maybe it's finally time to finish it 😊🤝 Thanks!

@@magicwoodjewelry yeah can't wait to see it 😁

This is burl wood, but I don't know exactly what species. I had this piece for several years. Probably maple or poplar

Hi. I designed and printed them just for the purpose of creating this lamp

Hey, it depends on who likes which effect. Sometimes I leave them on especially for water projects, but sometimes for other projects I use a resin vacuum pump. In this project, pearl dye is added, which may give the illusion of small air bubbles, but in fact it is pearl dye.

Hi. I don't have it brother. I did it just for this project.

@@magicwoodjewelry Well.. not a problem. Your work is BEYOND cool. TY for the response.

Hey. Thanks for the information. It's actually a link to an affiliate program Here's a link to the resin if you want to use it teexpert-tech.com/collections/deep-pour-resins

Thanks for comment. Hmm, I understand. Music is a matter of taste. I get that you might not like it :) 😊🤝