Epson ET-2720 SUBLIMATION PRINTER. EASY SETUP using Printer's Jack ink

No video

Epson ET-2720 SUBLIMATION PRINTER. EASY SETUP using Printer's Jack ink

Рет қаралды 37,540

Күн бұрын

Step by step setup of my Epson ET-2720 SUBLIMATION PRINTER. using Printer's Jack ink from Amazon(link below). Easy sublimation printer setup for beginners using this video bc it goes through the full process. Video may be long but its detailed. I go through the color settings also, which helps to avoid unwanted lines in your print. Leave any questions you have in the comments.
part 2&3 when I actually use the printer to sublimate on blanks below
• SUBLIMATION PRINTING d...
• Sublimation for beginn...
Amazon link for ink. This is not a promo For informational purposes only
www.amazon.com...
#sublimationprinter #epson2720 #printersjack #sublimationforbeginners #beginnerfriendly #sublimationink #printerconversion

Пікірлер: 111

@lizellevanwijk Жыл бұрын

I work from home , and found a HP desk set at a very reasonable price. Easy to hook and set up . Good quality!

@Shiining4miles Жыл бұрын

Great! I hope you have fun with it, be creative and enjoy. Thanks for watching 🙂

@jacquelynodom5083 6 ай бұрын

Thank you for this detailed tutorial! My printer has been sitting for fear of messing it up, but came across you video and I'm following along with the setup! 😀

@Shiining4miles 6 ай бұрын

You're very welcome! Glad it was helpful Now go create something special !!!

@601Moni 2 жыл бұрын

I think it’s only right that I thank you for this awesome tutorial. I was up and running in no time! I’m now ready for my sublimation crafting to begin. 🥰😘

@Shiining4miles Жыл бұрын

Thank you so much! I really appreciate you watching and your lovely comment. I’m glad to hear it was easy for you. Enjoy sublimation!!

@jameishiaelmore314 3 жыл бұрын

I Honestly have to say u are the only person I have seen that knows how to help set up something step by step thank u so much u need to do all Videos on everything 🥰

@Shiining4miles 3 жыл бұрын

Thank you for watching and for your kind words. I’m glad this was helpful 😊

@loragrant9495 3 жыл бұрын

You are amazing. I had been looking on u tube all night and I found you. I would have tried to use the syringes it came with. I didn't make any mess at all. I've had my new printer since end of November, sitting because I was terrified to convert. I have RA & Sclerderma so I am not graceful. Just wanted to thank you so very much!!!

@Shiining4miles 3 жыл бұрын

You’re very welcome. Thank you so much for watching. I’m glad this method was helpful to you.

@mistatig 3 жыл бұрын

cosmos ink has a kit for the ecotank printers. it comes with the 4 bottles filled with sublimation ink. i just bought a new ecotank 2720, took about 2 minutes to fill all the tanks. no need to clean the bottles that shipped with the printer. cost was 40 bucks for the kit.

@Shiining4miles 3 жыл бұрын

That’s interesting. Thanks for watching.

@lynnettethompson5442 3 жыл бұрын

I just received mines in the mail today I’m so glad I stumbled across your channel thank you so much for the easy step by step instructions just waiting on my ink to come in

@Shiining4miles 3 жыл бұрын

That’s great ! Thank you for watching. Check out my other videos for more ideas on using this as a sublimation printer.

@kanikaisbeingkanika 2 жыл бұрын

Thank you for this video. The information in this video was very helpful. The instructions were very clear, precise, thorough and easy to follow. I am ready to begin my sublimation journey!

@Shiining4miles 2 жыл бұрын

Your welcome I’m glad it was helpful. Good luck and have fun!

@cassandrashanks5045 3 жыл бұрын

Thank you, I just received mine today and it is still in the box but you made it look extremely easy. I wished you would have shown how to connext to the computer. Great video!!!!

@Shiining4miles 3 жыл бұрын

That's great! It will be easy for you also. Thanks so much for watching.

@victorhuerta5990 3 жыл бұрын

@SassybyDesign3732 3 жыл бұрын

I have this printer for only a week now and I’m afraid to get started. Your video was very easy. I’ll eventually set it up soon.

@tylaaelise 3 жыл бұрын

Thank you. We used the needle things it came with and it took forever. 😭. Your way was quicker and easier.

@Shiining4miles 3 жыл бұрын

I'm so glad this video could help. Thank you for watching!

@tylaaelise 3 жыл бұрын

@@Shiining4miles no problem. 😊

@faithchrestman7409 3 жыл бұрын

The needle did take forever!!

@aprilmcglothlin9613 3 жыл бұрын

@@faithchrestman7409 did you wash the lids to or just the bottles

@faithchrestman7409 3 жыл бұрын

@@aprilmcglothlin9613 neither I used printer jack ink and I put it in the printer with the needles

@jeannestiffler2837 2 жыл бұрын

thank you so much for your video, made everything so much easier for me to get the printer set up. Now I just need to figure out how to actually print something to put on a mug

@Shiining4miles 2 жыл бұрын

Great news I’m glad this was helpful. Thanks so much for watching

@andreahernandez2810 3 жыл бұрын

Great video! Extremely thorough and very helpful. Thank you for doing this video!!

@Shiining4miles 3 жыл бұрын

I’m glad it was helpful. Thank you for watching ! Be sure to check out my other videos on sublimation.

@whitfirstladyrobinson7864 3 жыл бұрын

I'm am following your video as I setup my printer now so far very helpful video :)

@Shiining4miles 3 жыл бұрын

Great, glad it was helpful. Thanks for watching!

@DATGIRLMISSY 3 жыл бұрын

Thank you so much for your help!!! Loved that you explained every step of the way!!

@Shiining4miles 3 жыл бұрын

Thanks so much for watching, glad this was helpful.

@janettorres8738 3 жыл бұрын

Very informative from start to finish, thanks for sharing.

@Shiining4miles 3 жыл бұрын

Thanks for watching😊

@msims7851 3 жыл бұрын

Thank you for a great tutorial! Have u tried using the 8.5" x 14" Asub paper?

@cindyspurse871 3 жыл бұрын

i was setting up the exact printer, this video was so helpful!! Did you have to change anything else for printer jack ink? The instructions that came with my ink said to set up a icc download

@Shiining4miles 3 жыл бұрын

Hi and thanks for watching. I did not use the PrintersJack ink instructions. I only followed the instructions for the printer

@meca-gayemitchell9127 Жыл бұрын

Hi there, I am using an ET 2720 printer as well,. I removed all the blue tape from the printer followed your instructions, after turning it on it is saying I should remove protective paper from the scanner unit. I am not seeing any other tape, did you have to open the printer to remove any more materials?

@pawsitivedogmom979 2 жыл бұрын

Thank you!!!!! Very helpful! :)

@kasandragamboa2291 2 жыл бұрын

Thanks

@Shiining4miles 2 жыл бұрын

You’re welcome, thanks for watching 😊

@KushLuv93 2 жыл бұрын

I hope this Brand is Good I just brought it plus another brand of Sublimation Ink has messed up my Printer I need a Ink brand that isn't gonna clogged up my Print heads or mess up my Printer.

@freedomring41 3 жыл бұрын

AWESOME JOB!!

@Shiining4miles 3 жыл бұрын

Thanks for watching !

@carolemattia7867 3 жыл бұрын

is this printer a good quality - there are SO MANY. Thanks!

@jeanetteflores2448 3 жыл бұрын

Hi, when you washed the bottles did you air dry or stick something in there to get them dry faster?

@Shiining4miles 3 жыл бұрын

Hi I turn the bottles upside down on the towel to let the excess water out, then used the towel inside to dry rest of the moisture. Just be mindful of paper particles or lint left behind when dying which could effect the ink flow. Thanks so much for watching.

@yellowrunkz 2 жыл бұрын

great video do you have the ICC profile for this ink and printer?

@phenixaiden8522 3 жыл бұрын

Do you let the bottles air dry before you put the sublimation ink in there?

@Shiining4miles 3 жыл бұрын

Hi I turn the bottles upside down on the towel to let the excess water out, then used the towel inside to dry rest of the moisture. Just be mindful of paper particles or lint left behind when drying which could affect the ink flow. Thanks so much for watching.

@art.albania 2 жыл бұрын

I bought the epson et-2715 at LIDLE. Worked only 1 month and now stamps only in pink or black. I cleaned my heads but again the stamp sh bad. The tank is full of colored ink. Can somebody help me? Thnx

@nicholeflores3273 2 жыл бұрын

Hi, thank you for this video. I am following while setting up my ET-2850. When I selected that it has lines and selected to clean heads and printed the second test and it just printed the same test as the first. It didn't print colored blocks or ask me to pick which had least lines. I'm not sure how to do that now that setup is complete? Thanks!

@anitathompson8489 2 жыл бұрын

Same here😐

@SassybyDesign3732 3 жыл бұрын

? Once the printer is converted using one brand of ink (printer jack) can it be refilled using a different brand of ink?

@Beautywithadrie 3 жыл бұрын

Great video! ♥️ what software or app do you use for sublimation?

@Shiining4miles 3 жыл бұрын

Thank you for watching. I use Word and cricut design space most often. Check out my other videos to see the process. m.kzfaq.info/sun/PLvd8luT1j5HymCW5kmtbplkzIEhqpSUBq

@Mrsangierice 3 жыл бұрын

You’re wonderful, beautiful explanation

@Shiining4miles 3 жыл бұрын

Thank you

@margaretlewis75 3 жыл бұрын

Thank you so.much

@Shiining4miles 3 жыл бұрын

Thank you for watching

@deborahjones1753 3 жыл бұрын

I am using A-Sub paper which is not listed in the download list. What do I need to do?

@fosterknowles8388 3 жыл бұрын

hi i was following you but i dont know if i did something wrong i put the paper in and i didnt get a reading

@makebelievearuba5182 3 жыл бұрын

Do you have experience with changing sublimation ink brands? F.e. if you decide to change from brands, can you just put it into the printer? Or should u stay with just one brand?

@Shiining4miles 3 жыл бұрын

I Haven’t switched ink brands and I would hate to misinform

@michaeldull6452 3 жыл бұрын

Do you have to use sublimation paper for setting up or regular paper? Hate to waste sublimation paper.

@Shiining4miles 3 жыл бұрын

Hi Michael yes, you can find the answer to your question in the video! Thanks so much for watching.

@streetsupplyofficial 3 жыл бұрын

Thank you

@Shiining4miles 3 жыл бұрын

Thank you for watching.

@KrwVlogLife 3 жыл бұрын

Having a problem with this ink transfer. Using 400 at 40 seconds with my circuit press and when the black touches water it immediately turns brown

@Shiining4miles 3 жыл бұрын

Hi this video was solely for adding ink to convert a regular inkjet to sublimation printer. Please check out my other “sublimation for beginners” video for steps on the actual sublimation process. kzfaq.info/sun/PLvd8luT1j5HymCW5kmtbplkzIEhqpSUBq

@teshawilliams1474 2 жыл бұрын

My tops are hard to come off my hands are hurting 😩 any steps for that?

@Shiining4miles 2 жыл бұрын

Twist hard lol im sorry you are experiencing difficulties. I didn’t recall it being an issue when I did mine.

@teshawilliams1474 2 жыл бұрын

@@Shiining4miles I was definitely twisting my hands were very red. I had to get a thick cloth to use while twisting

@lilianagreda7424 3 жыл бұрын

did you have left over ink in the pink , yellow band cyan bottles ?. i did i dont know why.

@Shiining4miles 3 жыл бұрын

Yes I had a small amount left in the bottles.

@niquetv955 3 жыл бұрын

Did you use warm water to wash out the bottles?

@Shiining4miles 3 жыл бұрын

Hi and thanks for watching. I can’t remember the water temperature I rinsed the bottles with. Tbh I don’t think it matters either way. Warm water is ok

@Mississippidawg 3 жыл бұрын

i think i missed the size of the sublimation paper?

@Shiining4miles 3 жыл бұрын

Hello and thanks for watching. I used regular printing paper for the test print in this video. The sublimation paper is the same size 8.5x11

@debi6511 3 жыл бұрын

Did you use Sublimation paper or plain paper for the testing

@Shiining4miles 3 жыл бұрын

Hi, thanks for watching. I use plain paper for the test . If you watch my other videos you can see how I use sublimation paper (A-sub) for projects

@debi6511 3 жыл бұрын

@@Shiining4miles thanks so much I just bought the printer today, after watching your video! Great job!!

@leahn1511 3 жыл бұрын

does jack have a kit so i dont have to use my own ty

@Shiining4miles 3 жыл бұрын

I’m not sure if PJ has a kit. But there are no kits needed for this process. Very simple and easy to complete.

@faithchrestman7409 3 жыл бұрын

I followed all of these steps. When I print a photo it has line all on the image how can I fix that?

@Shiining4miles 3 жыл бұрын

It’s the settings. The lines can be avoided during the initial print and nozzle head checks. Select the most solid number with no streaks or lines which is covered in this video.

@faithchrestman7409 3 жыл бұрын

@@Shiining4miles I did the steps. I will try it again. Thanks

@susiewarren8374 3 жыл бұрын

Did you get the lines figured out ? I’m having the same issue 😢

@faithchrestman7409 3 жыл бұрын

@@susiewarren8374 I'm going to try it today.. hopefully I can fix it

@eneelythebest 3 жыл бұрын

Hi, did anyone purchase the protection plan?

@johnjames4323 3 жыл бұрын

what size print is that

@Shiining4miles 3 жыл бұрын

Full page print on standard letter size 8.5x11 paper. Sorry I don't have the image dimensions. Thanks for watching!

@johnjames4323 3 жыл бұрын

@@Shiining4miles The reason i ask thry say this printer only prints small but that image print looks like a good size. I have this printer. I haven't decided what ink to use. Thank you for this video.

@Shiining4miles 3 жыл бұрын

@@johnjames4323 I understand. The logo was created full size in inkscape, if that helps.

@stephaniehernandez1683 3 жыл бұрын

What Sublimation paper did you use?

@Shiining4miles 3 жыл бұрын

a-sub

@tamiharvey1631 3 жыл бұрын

How long do the 4 bottles last?

@Shiining4miles 3 жыл бұрын

Hi and thanks for watching! The ink lasts quite a while from what I see so far. I’m still well over the halfway mark on the ET-2720. Also note I had a small amount of Printers Jack ink leftover in the bottles after filling the tanks.

@KrwVlogLife 3 жыл бұрын

Can you help