Epson ET 2750 - How To Clean Printhead

Epson ET 2750 - How To Clean Printhead - Printer Error Solved

Рет қаралды 285,588

5 жыл бұрын

Printhead Cleaning Kit (CLICK HERE TO BUY!): geni.us/wArXsZT
Epson 502 INK: geni.us/O9Y0hO
Screw Driver: Electronics Screwdriver: amzn.to/2XEmcSZ
Support Website: www.bestprinterstech.com/
WARNING: POWER CLEANING MUST BE PERFORMED AFTER PRINTHEAD CLEANING. Please Refer to the Power Cleaning Instructions at the bottom of this page.
Video Instructions: • Epson Eco Tank - POWER...
Epson ET-2750: amzn.to/2INzZjS
Step 1. Print a Nozzle Check Report.
Step 2. Go to print another nozzle check, then unplug the printer ( Make sure printer is powered off).
Step 3. Make sure ink levels are completely full before proceeding with this method.
Step 3a. Unscrew print-head cover.
Step 4. Find what color is having the most issues on the printhead.
Step 5. Flush the nozzle with cleaning solution with B.P. Cleaning Kit.
Step 6. Replace all veins and screw the printer back together.
Step 7. Turn printer on and attempt to print a nozzle Check Report.
Step 8. Print color pictures until all color come back to normal.
Step 9. Repeat process if necessary.
Disclaimer
Some links may be linked to an affiliate marketing account and Best Printers may take a small commission for any products you purchase. We are not sponsored and companies do not provide products that we review. All products on our channel have been purchased.
Claims made in repair videos are deemed reliable but not guaranteed. Each situation is unique and your printer may not be repairable. Brandon or Best Printers cannot be held liable for any damage caused to printers from the use or misuse of these instructions.
All Links above are resources to either a cleaning kit, printer, ink or other items/ services that we hope are helpful to you as the consumer. We wish you the best of luck with your printer repair and product purchase!
® 2024 Best Printers LLC
EcoTank Use Warning, Must Run A Systme Power Cleaning:
Power Cleaning Using the Product Control Panel:
You can run a Power Cleaning using the control panel on your product.
Note: After a Power Cleaning, you must turn off the product and wait at least 12 hours before running another Power Cleaning.
Turn off the product.
Visually check the ink levels and make sure each ink tank is at least one-third full.
Caution:
If you run a Power Cleaning when the ink levels are low, you may damage the product.
Press and hold the power button and the help button at the same time until you see the Power Cleaning screen.
Follow the instructions on the LCD screen to run the Power Cleaning.
When the Power Cleaning is finished, run a nozzle check.
If the print quality did not improve, turn off the product and wait at least 12 hours before running another Power Cleaning.
If the print quality does not improve after running the Power Cleaning utility multiple times, contact Epson for support.
-Epson.com
epson.com/faq/SPT_C11CG22203~...
® 2023 Best Printers

Пікірлер: 446

@TheClimbingNinja 4 жыл бұрын

These directions were perfect! My magenta hadn't been working right for months and the cyan kept missing lines after performing the head cleaning and running a nozzle check. Using this product and following the directions in the video worked like a charm! Just make sure you do the power cleaning after cleaning the printer heads with the cleaning solution and run another nozzle check to ensure everything is printing properly.

@Jenn2004kuz 4 жыл бұрын

Im having the same problems with magenta and cyan! Im going to try this!

@BestPrinters 2 жыл бұрын

Awesome! Yes it is important after using the cleaning kit, geni.us/wArXsZT , too run a power cleaning so that the ink is pushed into the system.

@AgreeWeCanDisagree Жыл бұрын

Mine just started with the magenta so I’m going to try this as well.

@junalvarado2806 Жыл бұрын

These directions are so clear and simple to follow. After: 3 nozzle checks, 2 print-head cleanings, and 1 power cleaning --- my printer works again. Thank you so much for filming such clear instructions and for selling a reliable cleaning kit product.

@BestPrinters Жыл бұрын

Great to hear!

@drawingitout4673 Жыл бұрын

This worked perfectly! My printer was basically printing blank pages. After using the kit, then doing 2 nozzle cleanings, and 1 power cleaning it worked. I was going to give up after nozzle cleanings but the power cleaning made the big difference. Thank you.

@neeceywithak5334 2 жыл бұрын

Thank you! This was very thorough and easy to watch. Others I’ve watched gave too much info. You were straight to the point. Ordering my kit today and I’m hoping this work.

@BestPrinters 2 жыл бұрын

Awesome and thanks for subscribing!

@loribishop6530 Жыл бұрын

Thank-goodness for you and KZfaq!! I tried other suggestions prior to buying the Printhead Cleaning Kit and Power Cleaning (which many said not to do). NOTHING worked until I did BOTH the Printhead Cleaning AND the POWER CLEANING! Everything is back to normal!! THANK YOU SO MUCH for your video!!

@BestPrinters Жыл бұрын

You are so welcome!!!!

@nblanchard1667 5 ай бұрын

Same here. I was hitting a brick wall until using both to clear a blockage in the Black nozzle and Power Cleaning my way back to clear print.

@roxymccue1820 Жыл бұрын

I followed your tutorial to the T. It was informative and precise. When I was finished, I ran a head cleaning and nozzle check and my magenta lines were still missing. I read the comments down below and learned about Power Cleaning. So I did that. I'm not sure if it was the Power Cleaning that brought back the magenta lines or a combination of both methods, but I got all my colors back.

@BestPrinters Жыл бұрын

Great job!

@aneetabrown5814 2 жыл бұрын

I was getting white vertical lines through some of my text and followed Janice Carter's suggestion of a power cleaning. It worked! Thank you Janice. Good video.

@BestPrinters 2 жыл бұрын

Sorry I wasn’t able to get to you message. Please create a new comment with the same question if you still need a response. Thank you!

@riyoun1 4 жыл бұрын

This worked for me and I was happy with the purchase rather than buying a new printer at $300. I put in some suggestions for some things I learned and put them in my Amazon review for the product.

@BestPrinters 2 жыл бұрын

Awesome, thank you!

@ponymovie 3 жыл бұрын

Worked perfectly, this is the second time in about a year that I used your cleaning kit. Thanks!

@BestPrinters 3 жыл бұрын

Glad to hear it worked for you!

@duanewilson3390 3 жыл бұрын

I did this and I made 200 copies and my black ink isn't coming out

@ponymovie 3 жыл бұрын

@@duanewilson3390 There was another suggestion to turn the printer off when not using it. Helps to keep from drying the ink out. After I used the kit and started turning the printer off...have had the best results doing that.

@abianeconciertos2319 3 жыл бұрын

2nd time?! I hope this doesn’t become a regular occurrence.

@patappleby4832 2 жыл бұрын

Purchased your Cleaning Kit, it worked like a dream. Don't forget to do the power cleaning. Thanks

@philipedmondson9136 2 жыл бұрын

Many many thanks for this excellent, clear and well filmed video.

@BestPrinters 2 жыл бұрын

Glad you enjoyed it! Consider subscribing to my channel

@darronfick9894 4 жыл бұрын

Finally got around to using this product on the Cyan printhead. This did the trick. In my case the ink levels were still 2/3 full. I think it might be a good idea to print in full color periodically just to keep things moving.

@hurstma59 4 жыл бұрын

My color ink wells are over 1/2 full.

@quatrax8691 3 жыл бұрын

You just need to do a Power clean. Hold the on/off button and the "?" Button. This guy is only trying to sell his stuff while it can easily be fixed

@BestPrinters 2 жыл бұрын

Absolutely, I am glad it worked for you!

@bowill2179 Жыл бұрын

@@quatrax8691 Did a power clean still doesn't work

@Sheltieshangrila Жыл бұрын

@@quatrax8691 I did 2 power cleanings in addition to at least 5 print head cleanings and my black still wouldn't work until I used this product. While there's other cleaners on the market, his kit is set up for easy & immediate use. And with Amazon Prime, you can get it delivered same day. Your negative comment is completely undeserving b/c power cleanings don't work for everyone, as per lots of other comments on here.

@amyleduccameron 5 ай бұрын

THANK YOU! For me it was just about the first part of the video, with interrupting the nozzle check and then placing a paper towel to collect all the excess ink! Everything is clean now, and saved me a lot of frustration😌🙏🏻

@BestPrinters 5 ай бұрын

Glad it helped!

@blessedhomeschoolmess Жыл бұрын

What if when you did your maintenance checks and literally no ink prints ? I was getting vertical lines prior and at times just blotches on the paper. Would I use the same method?

@popsshops 4 жыл бұрын

You say the cause of clogged nozzle is usually due to running the ink tank too low. For me that's not the case and I suspect my issue is infrequent use with ink drying in the nozzle tips. Do you agree?

@JohnSmith-un9fy 4 жыл бұрын

This guy is just trying to sell ink and kits. Generally the head can dry out a bit or cheap ink can cause this issue as well.

@AKbushswatter 3 жыл бұрын

Yes, my infrequent use causes the ink head to dry out, power cleaning usually works, but this may work if it doesn't.

@jeremyp8501 3 жыл бұрын

@@JohnSmith-un9fy exactly lol 99 times out of 100 power cleaning works and even if it doesn't you can easily make your own fluid with a tiny bit of research.

@JackkBurtonn 3 жыл бұрын

@@jeremyp8501 so my et2750 doesnt have the power clean option so whats the way you guys power clean? Cause ill yake a tooth brush and some rubbing alcohol and scrub a dub lol

@veganriajones3812 3 жыл бұрын

@@JackkBurtonn press the question mark and power button until the power cleaning option comes on

@Kateandmykimmytheguineapig 11 ай бұрын

Hi! Thanks for your video. I have a question; my 2760 doesn’t feed up the ink from the tank through the tube to the cartridge. I have full tank of ink but my cartridge is empty. How can I fix this issue?? Help me please

@pinkisenvy 5 ай бұрын

4 years later and this was still very helpful!! !Thank you!!!

@BestPrinters 5 ай бұрын

Great to hear!

@billbaran1133 4 жыл бұрын

After using the cleaning solution. I ran through a "power cleaning". After the power cleaning everything works well. The cleaning solution worked well but I needed that final step.

@BestPrinters 4 жыл бұрын

Yes I just came to the same conclusion and added it to the description. Thank you for sharing.

@uniefresh420 Жыл бұрын

I had a black clip fall off when I was putting the paper towel on and was curious if you had a pic or video so I can put it back on thank you

@Overland_Chuk Жыл бұрын

Great video. Can't wait to give it a try. I do have a question however. It is possible that the clog is at the supply tank into the vein as opposed to at the print head?

@solodolo304 2 жыл бұрын

This worked for me. Thanks for the instruction video and kit links 💪🏾💪🏾

@BestPrinters 2 жыл бұрын

Great to hear!

@bigflyer2172 3 жыл бұрын

When our ink supply on the ET 2750 is completely full we get an error message that warns "low ink please check ink levels." every time we print. test printing looks ok.

@edd2169 2 жыл бұрын

Oh thank you for the tip, so easy and much simpler!

@BestPrinters 2 жыл бұрын

You bet!

@saidagarcia75 Жыл бұрын

Help please with my epson et-2750. My cayan is printing green. I've done head cleaning & power clean. What els can I do

@pr1576 11 ай бұрын

Thank you sooo much! I was able to fix my printer thanks to you.

@juliafox4341 2 жыл бұрын

I followed all instructions as per video (twice) and it is still not printing correctly. I left it overnight and although it appears to be printing, it is extremely faint. The printer is only just over a year old but still now out of warranty, do you have any other suggestions?

@carminedigenova2698 3 жыл бұрын

Great instructions. Thank you.

@BestPrinters 2 жыл бұрын

Glad it was helpful!

@spiderstone 3 жыл бұрын

Brandon I have this printer and i have a question when I print a photo when it comes out there are white lines in the photo is there a setting for this or should I clean the way you did with the cleaner...or should I get an extra lazer printer for photos...thanks

@BestPrinters 3 жыл бұрын

Hey Rick, yes so try going into your settings on your computer and make sure it is set to print on photo paper. If it already is then this kit will help with the problem.

@sydney191 2 жыл бұрын

Worked for all my colors except black. There was a lot of resistance and it would not let me flush the solution. Any tips?

@josephjudy5225 3 жыл бұрын

It worked for me too! Thank you so much!

@BestPrinters 2 жыл бұрын

You're welcome!

@hayleygomes3844 Жыл бұрын

After following the first steps and taking the screw off, I then had to put it all back because it wasn't forewarned that we had to buy a kit to follow it. Might be helpful to have had this warning early on!

@BestPrinters Жыл бұрын

Ok, thank you for your feedback.

@ladytiedi Жыл бұрын

Really appreciate this... well-done video that I could follow along with. My Cyan is totally clogged!

@BestPrinters Жыл бұрын

Great to hear!

@marvelousrazwa 2 жыл бұрын

Hey I got a question…I accidentally set up my brand new ET2750 I load couple of the inks and I forgot to load up the black and the yellow… but I filled them afterwards, but it doesn’t give me an options to charge the black and the yellow… eventhough I reset the ink the black and the yellow still not printing or showing… what should I do ??

@BestPrinters 2 жыл бұрын

In the settings there should be an option to charge the ink after set up.

@donny2929 Жыл бұрын

Perfect. Tried head cleaning and power cleaning but didn't work. My yellow was dead. Cleaned yellow, did test print and perfect. Blue had lines so did same to it....perfect. THANKS.

@BestPrinters Жыл бұрын

Awesome!

@YEGOuellet 2 жыл бұрын

Thank you for the tip,. I have added it to my tool kit! Cheers

@BestPrinters 2 жыл бұрын

So happy to hear that! Consider subscribing to my channel and leaving a 5 star review in Amazon

@Sheltieshangrila Жыл бұрын

Just purchased the cleaning kit. So thankful it's available for same day delivery via Prime. Hoping this works because my ET-2750 is only 4 years old and I've only printed 189 times with it according to the print counter. I've done a print head cleaning at least 5 times now along with 2 power cleanings but the black will still only print with a very faint outline of fonts. It won't print at all on a nozzle check or alignment. I've spent way too much time on it now so this is my final attempt at fixing it before I throw in the towel and buy a new printer, which won't be an Epson.

@BestPrinters Жыл бұрын

Best of luck, please feel free to reach out via Amazon messaging if you have any questions or concerns.

@Sheltieshangrila Жыл бұрын

@@BestPrinters I just finished and it worked like a charm! The only nit I have is the instructions could have been a little better... such as what all the accessories are for and the best way to heat & fill the syringe (ie: heat a mug of water in microwave for 1 minute then let bottle sit in mug for a few minutes & then to fill the syringe, feed plastic tubing into bottle to suck up fluid). Fortunately I rescue squirrels so am familiar with syringe feeding & food warming, but people who aren't might have issues, especially if they're elderly. I'm very happy with the results and your video gave excellent guidance. Just gave you a 5-star rating on Amazon. Thanks so much!

@BestPrinters Жыл бұрын

Thank for that feedback! I am glad you were able to manage and get your printhead cleaned. Also thank you for the review, that really helps! Have a great day!

@Sheltieshangrila Жыл бұрын

@@BestPrinters FYI that I just sent you a support question via Amazon regarding an issue that developed...

@sadieholst6525 11 ай бұрын

I ordered your kit flushed the tubes & it’s printing now with blank lines now. Some of the color is working, but not 100%. Any suggestions?

@weijiechin5483 2 жыл бұрын

Hi, great video! I bought the solution and follow what you have thought. The black ink went well however I face a lot of resistance with the color inks even after flushing it twice on the yellow one, don’t have enough solution to flush twice for the other 2 colors. Ithe colors still did not come out on after nozzle check Appreciate advise. Thanks

@BestPrinters 2 жыл бұрын

Hi, just run power cleaning until the color returns.

@islandaloha Жыл бұрын

How did you center the printhead? When you power off the printer, the print head automatically moves to the right hand side and the printer locks it there.

@juntjoonunya9216 Жыл бұрын

This usually works and has already for CM&Y but not K. I've run a couple ounces at least of isopropyl alcohol through to some paper towel underneath and it's still not printing but showing full ink on a new cartridge. Sounds like the printhead dead no? Or do I just keep going a few more rounds?

@BestPrinters Жыл бұрын

Keep on doing the cleaning a few more times and make sure you the power cleaning once you are done with the kit.

@Shanie1126 Ай бұрын

I just ordered the cleaning kit because two of my colours are not coming out well and one not at all. I was just wondering should I fill my ink before cleaning? My ink levels are half full or more on all. I have done head cleaning and a power clean and left off for 24hrs then I did it again but still not working, hence why I ordered your cleaner. Please advise I just want to know if it would be best to fill ink first. Thanks

@sinisass Жыл бұрын

Thanks for the video. I have a question a friend lent me this printer but I can't lower the upper door, where is the release button?

@BestPrinters Жыл бұрын

You have to push it up before it unlocks and comes down.

@paulagonzalez7264 2 жыл бұрын

Directions were great followed them to the T. But I am now having issues with the one that I cleaned. The cartridge will not refill again. Any tips on correcting that?

@BestPrinters 2 жыл бұрын

Yes run a power cleaning after using the kit.

@magsmorgan2914 3 жыл бұрын

I just used this after having dry printer heads and it worked perfectly.

@duanewilson3390 3 жыл бұрын

I did this and I so far printed 200 pieces of paper and I still don't have any black ink coming out

@magsmorgan2914 3 жыл бұрын

Well, most recently, I’ve had printer problems and tried to clean again but can’t get the colors to print. I’m buying a new printer and not the Epson

@BestPrinters 2 жыл бұрын

I am so glad to hear that!

@LittleBirdPianoAcademy Жыл бұрын

Worked like a charm! Thank you!

@BestPrinters Жыл бұрын

Glad it helped!

@johnscaramucci3777 Жыл бұрын

So after cleaning my printer heads using your product I went to run a nozzle check and the printer shut off in the middle of the check. Now it won't turn on at all. Have you run into this issue and would you have a solution to this problem?

@maliq618 3 жыл бұрын

Do you know how to get all the ink out??

@user-en8gy7jb8z 11 ай бұрын

Will the cleaning kit work with an Epson 2720. Also my problem seems to have occurred when I overfilled the magneta and now I can only print back or pink. Any suggestions?

@BestPrinters 11 ай бұрын

The cleaner should help.

@montsinya Жыл бұрын

It did work for me. It went from not printing at all to printing perfectly well, but I had to do a power clean.

@BestPrinters Жыл бұрын

Glad to hear that!

@raineymcclung6126 Жыл бұрын

I bought the cleaner solution and I followed all instructions, the cyan is not printing at all. Any help would be greatly appreciated.

@qjarman7753 Жыл бұрын

Hi… thanks for posting this. I followed your tutorial and it work great except now my prints and very feint/wishy washy… like the ink has been diluted… any advice please 🙏

@BestPrinters Жыл бұрын

Repeat the process with the kit and also run a power cleaning.

@sueannreeder6231 3 жыл бұрын

I have an issue in that my black ink will simply not go into the reservoir! It's been fine before, now I turn it upside down & it will not drip into the tank. I have the Epson ET-2750. Any help will be appreciated, thanks!!

@BestPrinters 2 жыл бұрын

Run a power cleaning.

@coltonjohnson1681 Жыл бұрын

Hi, what should I do if I have A LOT of resistance in the black color? I continued to run the fluid through the others just fine! Thank you for your help.

@coltonjohnson1681 Жыл бұрын

Also, my towel keeps collecting black ink? But lots of resistance from the top part where I put the fluid in

@BestPrinters Жыл бұрын

Warm up the cleaning fluid before application.

@christinabigelow7970 Жыл бұрын

Hi Best Printers, Have you ever used this product with an Epson ET-2550-? I am able to clean printer head but not the lines.. and I may need more color ink but I have black and only need black at this time. Can you help? Thank you... or should I just save time and buy an HP jet printer? TY

@BestPrinters Жыл бұрын

SO the printhead is the only thing you really need to clean. After doing the cleaning run a power cleaning. You should have full quality once you complete those two things.

@marykaupiko2223 Ай бұрын

Can I use the cleaning kit for sublimation printing?

@federicozheng803 2 жыл бұрын

Hi! I did the steps from the video and also power-cleaned the printer. However, I noticed how all colors were used except for black while power cleaning. Does this mean there's an issue with my black ink in the ink tank? Also the inks have been there for at least 9 months, what should I do? THANK YOUU

@BestPrinters 2 жыл бұрын

Not necessarily, repeat the process until all the colors return though.

@dianarobles5926 5 ай бұрын

Hello, I've replaced the ink and cleaned the ink cartridges and printhead. I did the nozzle check, print head cleaning and power cleaning and nothing has worked. The horizontal printing isn't working well and when I print out the sheet all the segments are spaced apart none touch at all or overlap. Idk what else to try. If you can please put some input on what else i can do. Thank you.

@BestPrinters 4 ай бұрын

You will need to repeat the cleaning process again and you may need to also warm up the fluid over boiling water, and reapply warmed up solution.

@mindyjezek1713 4 жыл бұрын

My issue is with excess black ink printing on my paper. Nozzle check is good. I did a power clean and it's still has splotches of black ink. Any suggestions?

@BestPrinters 4 жыл бұрын

Keep running the power cleaning until it returns to normal.

@jayt9665 3 жыл бұрын

i have a epson et 2750 printer using the ink that came with the printer and epson ultra premium photo paper glossy new out of the box only been using it about a month or so every time i run a print of a picture i end up with a blue line at the bottom some times blue and purple line but if i copy a photo from the scanner no problems ive tried reinstall of the drivers and software still the same problem even tried using a different computer with just the drivers tried nozzle check head cleaning power cleaning any idea what is causing this and is the link you left for ink is it good as the original in printing photos

@jayt9665 3 жыл бұрын

turns out a bad wireless connection caused the problem after disconnecting the printer and reconnecting its printing pictures just right

@YEGOuellet 2 жыл бұрын

Cleaning went well. I cleaned all the four inks. Although it started to work with anemic results, as I printed, the ink almost completely disappeared. It seems that the ink is not coming to the print head. What can I do to fix this? Tks

@BestPrinters 2 жыл бұрын

Hermes, is correct.

@marthabernal1098 Жыл бұрын

Where can I buy a extra empty cartridge for my ink. The pink cartridge nozzle broke right were the tube connects

@BestPrinters Жыл бұрын

You will have to look up the replacement part. Maybe on eBay.

@spiderstone 3 жыл бұрын

That was a great video......explained well.....

@BestPrinters 3 жыл бұрын

Glad it helped!

@dereinezur1715 2 жыл бұрын

@@BestPrinters The person didnt say it worked.

@joserivera-mu7zg 2 жыл бұрын

Where can I get the printer cleaning solition

@grapes770 2 жыл бұрын

Great tutorial! my only question is- once you're finished, do you run a nozzle check or do you need to clean the printer head after? Like what's the follow up afterwards? TIA

@BestPrinters 2 жыл бұрын

Yes you will need to run a printhead cleaning until the color returns.

@grapes770 2 жыл бұрын

@@BestPrinters ok thanks so much! Im waiting for the kit. Fingers crossed it works! 🤞

@DarEyezKnight 8 ай бұрын

i did used print head cleaning but needle still hard to press and not full yet. Looks like under hole blocks?

@BestPrinters 8 ай бұрын

If you remove the plastic cartridges you can clean the nozzles directly.

@nurseaprn97 Жыл бұрын

I am having issues with my et2800 printer. My black ink cartridge causing vertical stripes on the image.

@user-ep7be7sm4j 11 ай бұрын

UPDATE: I did a "power cleaning" and that fixed my problem. I probably didn't need to order and perform the cleaning with the Printhead Cleaning Kit. Followed directions after ordering the cleaner. It's the magenta that is causing my problems. Ran multiple head cleaning and nozzle check after cleaning, still no magenta showing up on the nozzle check printout. Any suggestions?

@BestPrinters 11 ай бұрын

Make sure Magenta is totally full and run another power cleaning.

@ariesr4883 4 жыл бұрын

So after the flushing, what about the left over cleaning solution? Will it containment the rest of the ink when it starts to fill the print head chamber?

@BestPrinters 2 жыл бұрын

No just run a power cleaning and it will be flushed out.

@kathaleenbrewer9559 Жыл бұрын

I have the Epson ET-2720 and the top glass does not lift up so I can't get to the print nozzles. All the colors stopped working. Is there any way to fix this printer?

@BestPrinters Жыл бұрын

Yes you will need to remove the screws around the glass scanner to reach the printhead.

@manpreetsinghlic 2 жыл бұрын

Hey. So i did this now its not sucking any new ink from tank. What after the video how will the ink return in the cartridge head as its all flushed with clean solution

@BestPrinters 2 жыл бұрын

Use the power cleaning function.

@fatimamata2890 2 жыл бұрын

THANK YOU SO MUCH FOR YOUR HELP! I

@BestPrinters 2 жыл бұрын

You're welcome! Consider leaving a 5 star review on Amazon and subscribing to my channel.

@droidfixer4404 11 ай бұрын

Hi I have the same Model i did not use it for 4-5 Months and now it print white papers 😢 what should I do ?

@propsandpop9726 2 ай бұрын

Now that the cartridge is empty how long does it to draw ink from the reservoir? Right now my black and cyan are blank

@BestPrinters 2 ай бұрын

it may need to go through a few manual cleaning cycles through the system before it's back to normal

@shaunatower3864 Жыл бұрын

Hoping you get this and have an Idea...Bought your solution and flushed everything. Everything flowing well and even pulled ink back into the print head cartridges. All colors are not printing at all!! It's like its not pulling the ink out of the tanks. There is ink from tank to nozzle but not to paper.....any ideas?

@BestPrinters Жыл бұрын

Now you will need to run a power cleaning. That will push the ink back into the system.

@yuhriandraikou2024 4 жыл бұрын

do you have to do an ink charge again? thanks

@BestPrinters 2 жыл бұрын

Yes you do

@portoghal8109 Жыл бұрын

Right when I needed it.

@BestPrinters Жыл бұрын

Cool!

@petertran5419 9 ай бұрын

I cannot push the syringe down. The pressure build up in the ink tank is not allowing it. In other words I can't push any fluid through. What do I need to do l?

@BestPrinters 6 ай бұрын

Warm up the cleaning solution.

@mariavarela1218 Жыл бұрын

Awesome video. Purchased the cleaning kit just ran the nozzle check and flushed the heads out. The color segments are not printing still. Only the black color. Any other suggestions?

@BestPrinters Жыл бұрын

You will need to run a power cleaning after running the kit.

@mariavarela1218 Жыл бұрын

:( I have an error message that I cannot bypass after I completed the cleaning kit instructions.

@erikgatz4179 4 жыл бұрын

ordered your cleaning kit. followed your directions. printed numerous high color images afterwards to clear cleaning solution through heads. now none of the colors are printing at all. help

@BestPrinters 4 жыл бұрын

You need to run a Power Cleaning.

@paulabodkin244 10 ай бұрын

I had filled the ink wells and then found that the colours were faint. By flushing/cleaning as per your video do i lose all the ink that was in the wells?

@BestPrinters 10 ай бұрын

Yes

@grannypattie 4 жыл бұрын

How do I keep the printer heads from getting clogged with ink on my ET2750 in the future?

@B.A.D._MX 4 жыл бұрын

Don't let your INK levels get too low.

@paulkahlert 4 жыл бұрын

@@B.A.D._MX And make a (small) colorprint at least every three days. Ink tank printers are supposed to print regularly

@BestPrinters 2 жыл бұрын

Dont run your ink too low, and print weekly even if its one page.

@bebetoribeiro9481 Жыл бұрын

Worked well to me congrats 🎉

@BestPrinters Жыл бұрын

Well done!

@kathycastrataro1685 4 ай бұрын

I was getting the colors but no black printing. I tried head cleaning and it didn't help. I tried using the kit to flush the black, and when pushing slowly on the syringe, the tube popped off and I got black ink everywhere. Any other suggestions?

@BestPrinters 4 ай бұрын

You will need to warm up the solution and reapply. Gently steady pressure will eventually allow for the blockage to break and you'll be able to clean the printhead.

@medusa569 3 жыл бұрын

How did you get the top lid to flip all the way back for access?? Mine doesn't go back that far.

@dillorado 2 жыл бұрын

Keep pushing it back gently. It gets stuck a bit.

@medusa569 2 жыл бұрын

@@dillorado I\ll give it a try again...I would up just taking the top off from the left side

@lydiabutler606 20 күн бұрын

If everything is coming out just a blue color will I need 4 kits to clear out the each color.

@BestPrinters 19 күн бұрын

That's normal. You only need one kit maybe one additional if you need more solution.

@davidtye4232 3 жыл бұрын

worked thanks!

@BestPrinters 3 жыл бұрын

Glad it helped! Consider leaving a 5 star review on Amazon.

@brandongomez9364 Жыл бұрын

I need help on how to clean because my ink spilled all in it and inside

@brandonm4319 2 жыл бұрын

How do i charge the cartridge since its been emptied of ink and full of the cleaning solution?

@BestPrinters 2 жыл бұрын

Run a power cleaning.

@julesalexander2583 2 жыл бұрын

Looks good. Thanks.

@BestPrinters 2 жыл бұрын

You bet

@joannemitchell1753 3 жыл бұрын

I purchased a printer ET 2750 from someone and he added more in before giving it to me. I installed the unit and tried printing a test sheet. When printing a test sheet/nozzle check nothing is printing. Is there something I'm missing or has all ink dried out? HELP !!

@BestPrinters 3 жыл бұрын

The print head may be dried out but the Best Printers cleaning kit can fix that problem. It is very common.

@jimbrannan6757 5 жыл бұрын

I like this printer because it is economical. I don't like the fact that you have to set parameters every time you print for paper size, paper type. I am so used to that being automatic. But money savings takes precedent. :)

@BestPrinters 2 жыл бұрын

Thanks for sharing!

@JeffreyAustin-l3w 12 күн бұрын

How do I order the cleaning kit

@andracollett5088 2 жыл бұрын

started out yellow and cyan not working. used the kit and nothing prints, used the kit again the next day and black and magenta print but very faint. My tanks are all full and never below half. Any other suggestions?

@BestPrinters 2 жыл бұрын

Yes, run a power cleaning always after using the kit.

@andracollett5088 2 жыл бұрын

Tried that and only black prints. All ink is full

@user-qh1xz4vs5y Жыл бұрын

Great Tips- easy

@BestPrinters Жыл бұрын

Nice!

@JustNow42 Жыл бұрын

Many ET-2750 has a software fault that prevent the operation of power cleaning ( and normal start) , I found that just tilting the printer in all directions , one after the other, up to about 60-70 degrees had an excellent cleaning effect. The printer became as good as new. Epson suggest to get the software fixed but it is too expensive my service center says.

@samanthacarney283 Жыл бұрын

I cleaned my rosin et 2750 and error message came up reading the 031006. Are you familiar with this

@BestPrinters Жыл бұрын

Try resetting the printer.

@user-rb1zm2ij2l 6 ай бұрын

Followed the instructions. The next day tried to run the nozzel check but suddenly the printer went off and I can't get it back on - seem like it died. Pulled plug and replaced but still nothing. Although I took steps to make sure it was dry, not sure if it shorted due to the solution? Anything I can do to save the printer or is it a goner?

@BestPrinters 6 ай бұрын

If you didnt allow 24 hours to dry it may have shorted. Now you should wait another 24 hours before trying to power on again.

@user-rb1zm2ij2l 6 ай бұрын

The printer still won't turn on. I appreciate you offering a solution to fix the ink blockage but you should be more clear that this could also completely brick your printer. Although it has been proven to work, perhaps this isn't the best approach for trying to fix given failure results in hundreds of dollars wasted.@@BestPrinters

@paigemcdonald2063 4 жыл бұрын

Can you tell me how to get the printer to go through the initialization process again where it will charge the ink?

@JonBrahh 4 жыл бұрын

Amen, havent been able to find this info for months...

@BestPrinters 2 жыл бұрын

Yes run a power cleaning.

@PepsiManX360 2 жыл бұрын

I ordered one of these kits from Amazon, but sadly FedEx lost it in transit (as usual). Hopefully they find it and send it to me for my older Brother printer.

@BestPrinters 2 жыл бұрын

Hey man message me directly, click on Best Printers on my listing page and I will get you a replacement.