Epson Stylus Pro 7900: DTF Conversion Part 2

Рет қаралды 6,333

Күн бұрын

This is Part 2 of Converting my Epson 7900 over to DTF.
0:00 Intro
2:25 Removing the empty cartridges
3:53: Filling the maintenance cartridges
10:23 Repair man mode
11:36 Installing new maintenance box
12:10 Checking Ink Lines
13:30 Removing maintenance cartridges
15:19 Setting up Ink Placement for the refillable cartridges
15:48 Filling Ink
25:40 Priming refillable cartridges
26:38 Installing the Ink refillable cartridges
32:24 Running Intial Fill
34:19 Printing
34:32 Nozzle Check
36:30 Outro
#stayhangry
#dtftransfers #howtoprintdtf #dtfprinter #epsonet8550 #epsonxp15000
#epson7900
All DTF Supplies:
Use Code: Hangry
For a discount.
DTF Ink (CMYKW): dtgpro.com/cicproduct/dtf-pro...
DTF Film A3+ (13x19): dtgpro.com/cicproduct/dtg-pro...
DTF Powder: dtgpro.com/cicproduct/dtg-pro...
Rip Software:
dtgpro.com/cicproduct/acrorip...
-------------------------------------------------------------------------- Website:
www.hangrymuscle.com
--------------------------------------------------------------------------
Follow me on Social Media:
/ hangrymuscle
instgram.com/ActionfigureZach
--------------------------------------------------------------------------
To donate:
CashApp $zachwill949
Venmo: HangryMuscle
Email: contact@hangrymuscle.com
FULL DISCLAIMER: I make a small commission on my affiliate links

Пікірлер: 44

@TarynCo 2 жыл бұрын

Hello...we just bought a 7900 and your videos have helped so much. We are in the process of getting all of our supplies. :) Can't wait for the next video. By the way, you give way more information than others do.

@artplumridge3673 2 жыл бұрын

Nice job

@HangryMuscle 2 жыл бұрын

Art Thank you for taking the time to watch 🙏

@stuartcotterill9475 Жыл бұрын

I'm looking to add a white ink circulation to mine, have you had any thoughts about adding one to yours?

@dioblisko 2 жыл бұрын

good job but why don't you bypass the cartridge and connect the ink tank/windex/cleaning fluid directly to the tubes?

@mohammedarfanrasool4662 Жыл бұрын

Hello... did you have to do anything else to get this printer up and running for dtf. (did you have to cover up the suction vacuum holes)

@jameswhite5911 Жыл бұрын

Hey Bro. Are you still using the Windex as cleaning cleaning solution? And has it caused any damage to the print head? I'm currently using Piezo Flush in 2 channels that I'm not running inks in, but because I have to run a print head clean everyday, I have been running through the Piezo Flush and its so expensive, even though I split it half and half with Distilled Water.

@jjuanguevara1 4 ай бұрын

They may sound weird but what can i do if all the ink cartridges are stuck? Just got the printer n did the latch open button. When to take out carts n they are all not budging. Push in to release but wont budge n definitely cant pull thek straight out either. I need help

@fernandoescobar4894 Жыл бұрын

So why did you left off the other colors? Were they not needed? I'm thinking of getting a 7900 that's why I'm asking

@berkshireembroideryprintin8956 Жыл бұрын

Is this still running? Also when you say that this channel is off do you put a cartridge with cleaning solution in that slot? Thanks

@saslgimmobiliersudfinister996 8 ай бұрын

Hi it s for what windex?

@TarynCo 2 жыл бұрын

Do you have an affiliate link for the ink cartridges from DTG Printer Parts? Also how do you like them?

@HangryMuscle 2 жыл бұрын

Hi, I don't. They been great. I only ordered the cartridges and reset chips from them

@TarynCo 2 жыл бұрын

@@HangryMuscle We ordered the cartridges and cartridge resetters. Looking forward to getting the beast running. 😹

@carzyday 2 жыл бұрын

hey were you able to get this to work? can you show us some of the prints?

@HangryMuscle 2 жыл бұрын

Yes kzfaq.info/get/bejne/fpqqmLWLmdjDn4k.html

@tiffanynewsom5412 Жыл бұрын

How often do you do a cleanse with the windex carts?

@HangryMuscle Жыл бұрын

When needed

@joelramosjurado3731 2 жыл бұрын

Did you use another set of refillable cartridges? Or how did you clean the windex to later put the ink? WHICH RIP DO YOU USE?

@HangryMuscle 2 жыл бұрын

I use 2 different sets, and Acrorip 10.5

@kenleung178 2 жыл бұрын

can epson 9900 use this rip @@HangryMuscle

@yolandabyrd3067 Жыл бұрын

@@kenleung178 I would like to know that as well!

@john-dm4qd 25 күн бұрын

Can you run cleaning solution between between uses? Or is that necessary?

@HangryMuscle 24 күн бұрын

Flushing the system regularly will prevent the DTF ink building up and clogging.

@ZeroBudgetDevelopments Жыл бұрын

Would this work on a 9900 44inch model it's the same machine just bigger I've found one cheap that needs fixing and Im gonna buy it

@HangryMuscle Жыл бұрын

Yes

@ZeroBudgetDevelopments Жыл бұрын

@@HangryMuscle thanks for the quick replly brother ill be up the pawn shop tommorow morning to pawn my miix 520 tablet to pay the small sum required to aquire one of these that needs printhead replacement ;) nice little find :) cheers man :)

@ZeroBudgetDevelopments Жыл бұрын

@@HangryMuscle just got a 9900 for 100 bucks has error ia39 supposedly the printhead needs changing or worse case the motherboard assy fuse needs changing I will be attempting to fix this over next year or two when you have to do maintenance on these things if you could make videos on how to repair and maintain them in a practical way would be really helpful I don't have the money to pay epson engineer to change printhead so am going to have to hope I can find the info I need to do it myself nice one again hopefully I got a bargain and not an an expensive lesson in what no to do with you insignificant sums of money :) 😎 😎 🤭

@mastergraphicsnyc4640 Жыл бұрын

Just received a 7900 & 9900 can thy both be coverted?

@HangryMuscle Жыл бұрын

Yes

@mohamedMK36 10 ай бұрын

s there a solution to this problem?-------------- Fatal Error ID 1A39 -7900-----pleas

@mrgemini100 Жыл бұрын

where did you get the info for the ink set up

@HangryMuscle Жыл бұрын

From my experience

@dioblisko 2 жыл бұрын

Which model do you choose (in Acrorip) from the list: 7900 or other?

@HangryMuscle 2 жыл бұрын

7900

@dioblisko 2 жыл бұрын

@@HangryMuscle In 10.3 I must choose a 7890. 7900 didn't work. Thnx and what you think about my other question about bypass a cartridges?

@kenleung178 2 жыл бұрын

@@HangryMuscle epson 9900 on the list of the rip?

@nanoupioupiou8144 2 жыл бұрын

where did you buy empty epson 7900 cartridges ?

@berkshireembroideryprintin8956 Жыл бұрын

Inkowl sell them

@jessegarcia6711 Жыл бұрын

Hey man, where did you buy the empty carts from?

@HangryMuscle Жыл бұрын

Dtgprinterparts.com

@TechyRodsWire Жыл бұрын

Can’t find these printers anywhere

@HangryMuscle Жыл бұрын

Craiglist, Facebook marketplace, offerup

@mastergraphicsnyc4640 Жыл бұрын

Would you be interested in helping in the conversion?