Epson Surecolor 170 Review | Unboxing, Setting up & Printing

Рет қаралды 14,849

Күн бұрын

Epson SureColor 170 Review | Unboxing, setting up & printing
In this Video I will be unboxing, setting up, printing and reviewing the Epson SureColor F170.
The Epson SureColor F170 is an original sublimation printer and not a converted printer.
Get your SureColor f170 Dye-Sublimation Printer - digiprint-usa.com/shop/sureco...
Get your Epson Eco Tank 2760 printer here - amzn.to/3f8dx6u
Swing Design Cameo 4 PRO - shrsl.com/2upkf
Amazon Links:
Use my Amazon affiliate links below for shopping.
Silhouette White Cameo 4 - amzn.to/3rO3Uxx
A-Sub Sublimation Paper - amzn.to/2OWARJW
Printers Jack Sublimation Ink - amzn.to/3cp1OOk
Sublimation Keychains Blanks - amzn.to/3thJ6ij
Transfer Tape for Vinyl - amzn.to/2ONvFI6
Joyinland Heat Transfer Vinyl 12'' x 20feet - amzn.to/2OsPLYc
Round Sublimation Rubber Coasters - amzn.to/3wp5d8c
Hiipoo Sublimation Ink - amzn.to/3syHsco
Round Subimation Coaster - amzn.to/35Es9oI
Heat Resistant Tape - amzn.to/3xuctQw
Blank sublimation metal name card - amzn.to/3gIYIXD
0:00 Intro
9:46 Installing the sublimation ink
13:48 Turning on and setting up the printer
17:03 Aligning printer
19:30 Setting up printer with WIFI
21:26 Installing printer software
22:52 Printing images from silhouette studio
30:00 Reviewing the printer, and apparels
Check out how I sublimate on 100& polyester - • Sublimation Printing o...
🔴 Subscribe for more free KZfaq videos: kzfaq.info/love/hQT...
🔴 If this content brought any value or impacted you please like and share this video.
🔴 Leave your comments below if you have tips, questions, or would love me to do another video.
============================================================
Social Media:
▶️ Instagram: / allan21thom. .
▶️ Facebook Business Page: / allan21thompson
▶️ Email: atprints47@gmail.com
If you would love to Contribution and help support the channel send to:
Paypal: www.paypal.me/pianoboy21
FTC Legal Disclaimer - Some links found in the description box of my videos may be affiliate links. This will not cost you extra to use my links/codes. This is another way to support me and my channel.
Thanks.

Пікірлер: 160

@atprints 3 жыл бұрын

Make sure to check out how I converted the Epson EcoTank 2760 into a sublimation printer 👉 kzfaq.info/get/bejne/htKTm5yY3tW7hXk.html

@chucklitchford3642 3 жыл бұрын

Great video! Very thorough and clearly explained. Great job!

@atprints 3 жыл бұрын

Thanks very much and thanks for your support.

@meliciapilgrim5802 2 жыл бұрын

Thanks!!!!! I used this video to help me with my set up process. Was definitely clear and easy to follow!!!

@atprints 2 жыл бұрын

You are most welcome. Keep up the hard work.

@tshirtdesigner2106 2 жыл бұрын

Awesome tutorial in great detail. Thank you. Am considering this printer. Wanted to know more about it. Definitely thumbs up.

@atprints 2 жыл бұрын

Glad the video could assist 👍🏽👍🏽

@brucehull2455 2 жыл бұрын

Great tutorial. Thanks for the supply links!

@atprints 2 жыл бұрын

You are welcome.

@taskeenshaikh1426 2 жыл бұрын

Thank you so much for this video. Very informative. Watching your video as I try to set up my printer.

@atprints 2 жыл бұрын

You are most welcome. Feel free to ask any questions if you have any and I’ll assist.

@audreas.2114 Жыл бұрын

Great job! I really appreciate your in depth explanation of how to set up, print and review of the Epson SureColor F170 printer.

@atprints Жыл бұрын

Thanks very much for your support and your comment. I appreciate it.

@nicoleferrari1304 2 жыл бұрын

I just purchased this printer and found this video soooo informative. Thank you for the detailed tutorial.

@atprints 2 жыл бұрын

Tha is much for watching, for your comment and support. I really appreciate it and I am happy this video could help you.

@marlemebogle7259 2 жыл бұрын

Just brought this printer thank u for all your information you made setting it up very easy

@atprints 2 жыл бұрын

You are most welcome and thanks for your comment and support and I wish you all the best 💪

@whichcraftLiz 2 жыл бұрын

video with a full explanation. Thank you for going into the print settings and choosing media type and quality. NO ONE HAS DONE THAT IN ALL THE OTHER VIDEOS I'VE WATCHED. Subscribed and definitely going to check out your channel

@atprints 2 жыл бұрын

Thanks very much for your support as it means a lot to me and i am happy you got the details and information from this video. I am a very detail person so i try to provide as much details as possible to give as much assistance as possible.

@stevilucas 2 жыл бұрын

Came here to say the same thing! Thank you for a detailed explanation.

@atprints 2 жыл бұрын

@@stevilucas you are welcome and thank you so much for your support.

@JasmineSJuman Жыл бұрын

Love it got one for my teen,she hasn't used it yet,thank you for sharing 😊

@atprints Жыл бұрын

You are most welcome.

@jpla8716 3 жыл бұрын

Had to subscribe as soon as de Bajan accent hit me😁. Well done. Very informative video. Am seriously considering getting this printer.

@atprints 3 жыл бұрын

Thanks very much for subscribing and your support. i am happy that the video can bring you some information. Yes, this printer is a very nice one.

@badgeunderground6936 2 жыл бұрын

I stumbled upon his channel and from the time I hear the accent I say he got to be a Bajan lol.

@janetroddy6852 2 жыл бұрын

I am really enjoying your videos for sublimation printers. I watch om

@atprints 2 жыл бұрын

Thanks so much for your comment and support I really do appreciate it. I hope you get to watch the one I am posting this upcoming Sunday.

@deeddrawilson108 2 жыл бұрын

Hey Allan I'm sorry but I wanted to also say this is a awesome tutorial and I'm going to use it when I set mine up because I just got this same printer a few days ago 😊.

@atprints 2 жыл бұрын

Thanks very much for your kind words. I am happy that this video will help you. I hope the other videos on the channel can also benefit you at some point. I am excited to hear your news about the printer.

@lucia205p 2 жыл бұрын

Hi, great video. Whats the difference between fine and normal? Thanks

@kinghadu9611 Жыл бұрын

Fantastic video thanks alot bro it's the single best production value video I have ever seen on setting up a printer properly. Prepare for my HOT Slottie Thong Panty SUPER MODEL E

@atprints Жыл бұрын

Thanks very much for your support and I am happy you got value.

@shirleyf21916 2 жыл бұрын

Thank you for the great video! I just got one and installed it using a Mac. Still trying to figure out why my colors are coming out so dark!

@atprints 2 жыл бұрын

Congratulations 🎉🎊🎈 🍾 on the new printer. Is the print itself dark or do you mean when you press it onto the item?

@marythomas2357 2 жыл бұрын

Allen love your video well done. Can you tell me name of the tank in the back corner and what is used for. Thx

@atprints 2 жыл бұрын

So sorry for the late response. Thanks for your question and your comment. So the tank in the back is the Maintainence tank.

@630sunshine 3 жыл бұрын

Hi, Thank you for this great tutorial. Is that a regular tape dispenser you have your heat resistant tape in? Thanks!

@atprints 3 жыл бұрын

Thanks for your comment and support. Yes please it’s a regular tape dispenser. 💪💪💪

@paulsloan4725 2 жыл бұрын

Well done looks like it done a good job wish it would print bigger.

@atprints 2 жыл бұрын

Thanks very much for your comment and support. Yes, I also wish it could print bigger. I’m hoping in the future they would create one that would able to print 11x17 and 13x19.

@plotakiotrionqui2116 Жыл бұрын

Hi, thank you so much. I have some suggestions. Consider upgrading your lighting and record in 4k HDR. I just feel that the production need to catch up with the content. Nearly perfect. I appreciate this setup and testing. The manufacturer owe you big time for this. They made a video too. But it's like 1/3 as good as your video. You are awesome! I think they should link to this one. I just bought this printer and now I am a lot more confident about setting it up! I just liked and subscibed because you deserve it!

@atprints Жыл бұрын

Thanks so much for your comment and also suggestions. I've actually purchase new equipment late last year but have not set it up as yet. The plan is to product more high quality videos as you stated . Thanks again I really do appreciate it.

@abysss56 7 ай бұрын

Such a great video! TY, I haven’t found a way to email a print to the printer. Ill be leaving for 3 month and was thinking sending a print once every few weeks might keep it from drying up?

@atprints 7 ай бұрын

Thanks for your comment and support. What I will say is that I have my printer off all the time when I am finished doing a job and I never encounter any problems with lines being blocked up. So i honestly believe you can turn it off and leave it and come back and it will be good.

@DJV0ICE 2 жыл бұрын

i was thinking of buying it but i actually needed a wide format so i just found and purchased the ET 15000 Epson but with the f170 and f570 sub T49m ink and seeing how that comes out...

@atprints 2 жыл бұрын

I totally understand. The F170 is really amazing but as you said wide format is also key. The 15000 will give you that wide format and i am now in the hunt will hopefully would love to own a F570 or F570 pro in the further so i can do banners etc.

@FernandoMartinez-ih6rp 3 жыл бұрын

Thank you brother 🙂👍

@yaseryas1166 2 жыл бұрын

Amazing show

@atprints 2 жыл бұрын

Thanks very much.

@yaseryas1166 2 жыл бұрын

@@atprints very welcome 🙏

@onielmills8087 Ай бұрын

YES I LEARN SOMETHING TODAY

@atprints Ай бұрын

Awesome. I am happy you got value from the video.

@vickiebascle8841 2 жыл бұрын

This was awesome. What paper should we should with this printer? I bought the Epson paper but do I need to stay with that one? Thank you so much Allan.

@atprints 2 жыл бұрын

thanks very much for your question and congratulations on the printer. You can also A-Sub paper here is the link to some 👉 amzn.to/2OWARJW and you can find more links in the description of this video. I hope this helps.

@angeladaniel209 2 жыл бұрын

Very good video, very clear instructions. Do you have to use the ink that comes with the printer or can I use another company’s sublimation ink?

@atprints 2 жыл бұрын

Hi, Thanks for your comment and question. In relation to changing inks, what normally happens is you can void your warranty if you change inks and the printer starts to give trouble. A lot of persons do change the inks and get good results. This one will be totally up to you but if you ask my advice I would say to keep the standard ink. The standard ink gives really good results. I hope this answer helps and feel free to ask any more questions if you need to.

@angeladaniel209 2 жыл бұрын

@@atprints Thank You

@atprints 2 жыл бұрын

@@angeladaniel209 You are most welcome.

@azamnulla 2 жыл бұрын

Hi Allen, I have the F170 and was wondering if I can use aftermarket ink for Hiipoo or printer jack?

@atprints 2 жыл бұрын

Thanks for your question. Some people do change out inks but i would advise not just from the premises that it could void your warranty if they find you are using ink not belonging to them.

@sharon201082 2 жыл бұрын

Hi Allan can I use any white ceramic mug to do sublimation....thanks much

@atprints 2 жыл бұрын

Thanks for reaching out with your question. You can use white ceramic mugs to do sublimation but those mugs must be sublimation coated mugs. In other words the normal mug you would purchase from the supermarket or a store that sells dishes etc can not work. Sublimation mugs are coated with a special solution on the outside that allows you to sublimate onto them.

@nhutaluashford4543 Жыл бұрын

Hello Allan, Quick Question ! Can you use a different brand of sublimation paper with the surecolor F170 printer ?

@atprints Жыл бұрын

Yes please, you can use different sublimation paper.

@t-press1295 Жыл бұрын

HEY ALAN!! I WOULD LIKE TO KNOW IF I CAN DO DTF TRANSFER FILM PAPER WITH THIS PRINTER

@atprints Жыл бұрын

To be honest I am not 100% sure as I never tried it. However, I think the DTF is a totally different setup.

@rosekirk5000 2 жыл бұрын

I just purchased this printer today and I am very excited to get it. Your explanations was excellent. The only question I have is, is it regular paper you are putting in for the setting up or sublimation papers

@atprints 2 жыл бұрын

Thanks for your question and comment. Congratulations on the new printer. Yes it’s regular Paper I used in the tutorial to set up the printer. After that then you can use sublimation paper to print your projects. I hope this helps 💪💪

@rosekirk5000 2 жыл бұрын

Yes thank you for getting back to me

@atprints 2 жыл бұрын

@@rosekirk5000 your welcome 💪💪

@TK_NBG 6 ай бұрын

@@atprintshello, Great Video i have a DTF Transfer Film / Sheets in DIN A4, but the Printer Not Print on it… on normal white paper they Print, what is the Problem?

@TK_NBG 6 ай бұрын

Or what Type of sublimations paper i Need for the Epson

@deeddrawilson108 2 жыл бұрын

Hi Allan I wanted to ask you do you have to keep the Epson F170 plugged up and on all the time?

@atprints 2 жыл бұрын

Hi, thanks for your question. No, you don't have to keep it plugged in. Once you are finished with the printer, you can turn it off and plug it out.

@smont4239 2 жыл бұрын

Just came across your video today. I recently purchased this printer. I wish it came with software like the Saltgrass. What software are you using in the video with your designs?

@atprints 2 жыл бұрын

Thanks for your question. I normally use Silhouette Studio to do all my designs and printing. I hope this helps

@smont4239 2 жыл бұрын

Are you using the free or purchased version?

@atprints 2 жыл бұрын

@@smont4239 in that video I was using the basic edition which is free.

@zaragamplay4345 2 жыл бұрын

Hello Mr Allan Does This printer work with 220 voltage?

@atprints 2 жыл бұрын

Thanks for your question and sorry for the late response. Yes it can. Kindly see this info about the power requirements 👉 Rated Voltage: AC 100 - 240 V Universal (Automatic) Rated Frequency: 50 - 60 Hz Rated Current: 0.4 - 0.2 A I hope this helps.

@louisd95714 Жыл бұрын

Thank you for the review and demonstration. I am very tempted in purchasing this printer. But what is holding me back is that it doesn't include any graphics software, and I don't own anything close to PhotoShop or CorelDraw. Also, I am not good at graphic creation. So my question is being I don't own any of that software would it make more sense to go with this printer or go with the SawGrass 500 that includes Creative Studio? I want to use one of these ptinters to sublimate coffee mugs and shirts primarily.

@atprints Жыл бұрын

Thanks for your question and sorry for the late response. You can use any program and print from it. So in other words you don't need a graphic program to print with this printer. You can use Microsoft word, you can use Canva, and you can even download Silhouette Studio for free and use it to do your designs and print.

@louisd95714 Жыл бұрын

@@atprints OK, thank you. I might very well be purchasing this.

@atprints Жыл бұрын

@@louisd95714 You are welcome. It's a good choice.

@cjvl100 2 жыл бұрын

hello, I have a question. Can use this printer with the ipad or the iphone? thanks

@atprints 2 жыл бұрын

Hey thanks for your question. You should be able to print from your iPad or iPhone as the printer has wifi.

@EntityJewelry 2 жыл бұрын

Hi Allan, since you have both the ET-2760 and the F170 for sublimation printing, which one do you prefer more? I'm asking because I noticed that the max print resolution for the F170 (1200 x 600 dpi) is far much less than the ET-2760 (5760 x 1440 optimized dpi). Another reason is that currently, I have the ET-4800 printer. I was planning to convert it for sublimation printing up until I found the existence of the F170 which was made for this purpose. And then, I found out about the difference in the max print resolution between the 2 models, (ET-4800 has same dpi as the ET-2760). I'm debating whether to return the ET-4800 or keep it. What is your thought and experience between the 2 printers that you've used?

@atprints 2 жыл бұрын

Thanks for your question and let me apologize for the late response. Congrats on your printer. However, I would strongly advise going with the F170 because it's built and made for sublimation. If it is too costly then you can convert the printer you have at the moment. The reason I advise on going with the F170 is that it's built to take the lashes and built to carry the load for sublimation. However, we do know that converting a printer can work but sometimes lines get clogged or issues come up. The ET-2760 is a good printer but after reviewing both of the Epsons I recommend persons to save time, money, and a whole lot of mess and get the F170.

@EntityJewelry 2 жыл бұрын

@@atprints Thanks for the respond Allan. Yes, the F170 is too pricey for me. However, I'll still take your advice. I already have an ET-4800 set up for regular printing. So, this second ET-4800 will be going back. It's still in the box and would be an easy return. As for the pricey F170, well, I'm in no hurry for sublimation printing. So, I can wait for the F170 price to go down. Thanks again Allan.

@atprints 2 жыл бұрын

@@EntityJewelry you are welcome and keep pushing forward step by step and everything will fall in line as it is to.

@زانغت Жыл бұрын

i cant move the control panel why ?

@atprints Жыл бұрын

I hope that I am understanding you clearly but if you are touching the screen it will not work. Make sure to use the arrows on the right side to help you select options.

@jpla8716 3 жыл бұрын

Hi Allan, would you be able to recommend an efficient and affordable heat press please and thanks?

@atprints 3 жыл бұрын

Sure i can recommend one for you. My question would be are you looking at a all in one heat press or just one heat press. There are 6 in 1 heat press which comes with a hat, mug, plate and shirt piece. So give me a little more info on your ideas.

@jpla8716 3 жыл бұрын

@@atprints Just a heat press... not all in one. I'm about to follow you on IG btw. Love your work.😄

@atprints 3 жыл бұрын

@@jpla8716 Great, once you follow me send me a message and we can chat and ill surely send you a link to a reasonable heat press.

@loubyl9886 2 жыл бұрын

Hi, With regards to the 6-in-1 heat press you recommend, can you send me the link please? Also, how does the F170 compare to the Oki printer re: quality? The Oki printer is obviously top of the range and expensive, hence looking for a cheaper good quality alternative. Your video is very informative - thank you. 😊

@atprints 2 жыл бұрын

@@loubyl9886 I want to apologize for the late response as I am now seeing the comment. Thanks so much for your question. However, I honestly can't compare the F170 to the Oki printer as I never dealt with the OKi printer before. I checked out some reviews on them but i can not be so sure to give a comparison so I am truly sorry. I can tell you the F170 is a true dye-sub printer and it saves you from converting printers. In relation to the 6 in 1 heat press please see the link 👉 heattransfer.ositracker.com/197375/11767/url_19521

@Nu1ax 2 жыл бұрын

I just recently got mine a week and go and I kinda envy your prints end up so good because mine has this lines of little dots that ruin my prints and sublimation and can't seem to find a solutions. Have you ever had this problems if so what was your solution?

@atprints 2 жыл бұрын

Thanks for your comment and I am willing to help you. Did you do the alignment before printing with the printer?

@Nu1ax 2 жыл бұрын

@@atprints Yup and clean the nozzle as well.

@atprints 2 жыл бұрын

@@Nu1ax reach out to me on Facebook or Instagram and I can help.💪

@Nu1ax 2 жыл бұрын

@@atprints I solve it is the paper. From any one new to the epson F170 don't buy Color Make paper.

@atprints 2 жыл бұрын

@@Nu1ax So you were not using A-SUB Paper?

@chaoticsirencreationsllc8227 2 жыл бұрын

Does this printer print on dark cotton t-shirts?

@atprints 2 жыл бұрын

Thanks for your question. It’s not more so the printer you would be asking about but more so the shirt you are using. Let me explain. When you are sublimating onto a shirt it’s best for that shirt to be 50% polyester or higher. If you try to sublimate onto a cotton t-shirt especially if it is a 100% cotton what will happen is that the ink will transfer to the shirt but it will be faded and when you wash the shirt the ink will either wash out or fade away. So once your looking into sublimating onto shirts it’s best to have 50% or higher in polyester. If you get 100% polyester it’s even better. Hope this answer helps.

@AnitaAsani 2 жыл бұрын

Hi, can we use the f570 fluorescent inks with the f170?

@atprints 2 жыл бұрын

Hi, well I never led tried it before so I am honestly not sure. I would personally advise to stick with the original inks. It may work but some printers have warranty etc that you don’t want to break.

@AnitaAsani 2 жыл бұрын

@@atprints They are from the same manufacturer, Epson, the F570 is their larger 24" sublimation printer. Which is why I was curious

@atprints 2 жыл бұрын

@@AnitaAsani yes I do know they come from the same place but inks has different code also. If you do try it you can let me know how it works.

@AnitaAsani 2 жыл бұрын

@@atprints Okay...I'll remember to update you when I do. Thank you so much for your time!

@atprints 2 жыл бұрын

@@AnitaAsani thanks 💪💪

@carlosramirezfabian1256 3 жыл бұрын

Hey did you have to download a specific color profile?

@atprints 3 жыл бұрын

Hi, I didn’t download any color profile. I just install the software send print from what was in the program.

@Cravnlite 3 жыл бұрын

I was wondering too if you could change the color profile…?

@atprints 3 жыл бұрын

@@Cravnlite I am not so sure to be honest. When I unbox and set up it had its own installed but I will surely check it out and reply and let you know. Which settings are you currently using?

@Cravnlite 3 жыл бұрын

@@atprints , the settings that were installed by the printer software.

@jeffrey8658 2 жыл бұрын

Fucking love you bro spent all day breaking my head on this simple printer

@atprints 2 жыл бұрын

You are welcome

@yeseniadones1995 2 жыл бұрын

which program can you use to print ? can i use cricut ?

@atprints 2 жыл бұрын

Thanks for your question. Yes you can use the circuit or silhouette programme.

@yeseniadones1995 2 жыл бұрын

@@atprints aww thank you. your video explains everything very well. thank you

@luxeresa3050 2 жыл бұрын

Im using and iPad, and can’t download from the support.

@atprints 2 жыл бұрын

If you are referring to the programe to print you don't have to download the software on your iPad. Once you set up the printer and the wifi it should be able to print from your iPad

@yeseniadones1995 2 жыл бұрын

Hi i just purchase my printer and i wanted to know where do you purchase your ink

@atprints 2 жыл бұрын

Thanks for your question. Where is your location?

@yeseniadones1995 2 жыл бұрын

@@atprints New york

@yeseniadones1995 2 жыл бұрын

@@atprints i also have another question can i do tumbler with this printer as well.

@atprints 2 жыл бұрын

@@yeseniadones1995 yes you can do tumblers, mugs and much more.

@kavashicablack6598 2 жыл бұрын

Can you use this printer on a products that's not apple

@atprints 2 жыл бұрын

Thanks for your question. Yes, the printer can be used on other devices such as windows computers.

@kavashicablack6598 2 жыл бұрын

@@atprints great what website did you get this printer from?

@atprints 2 жыл бұрын

@@kavashicablack6598 this printer was bought locally. But you can go to Epson a website and also swing design should have some in stock. If you do go to Epson they will show you all the locations that the printer is available

@abysss56 7 ай бұрын

Can I send email to print to this f170? Ill be gone 3 months

@atprints 7 ай бұрын

You can leave it off and the printer will be good. The only other thing you can do is ask someone to run prints for you.

@IslandJewel 2 жыл бұрын

I just completed set up. My 1st print was very dull I heat pressed it and it came out so light... why?

@IslandJewel 2 жыл бұрын

The colors are very dull. I was so disappointed.

@atprints 2 жыл бұрын

Thanks for your question. There could be a lot of reasons why this has happen. So firstly, when it comes to sublimation and printing the print out always comes out dull or light so in this regard nothing was wrong there. Secondly when it comes to heat pressing there are different variables we have to look at such as 1. What are you pressing the image onto? Is it a shirt, mug, plate, hat, cloth? If its material, that material must be 50%-100 polyester. The higher the polyester the better. If you try to sublimate onto a cotton shirt it will come out faded and light and when you wash that shirt a lot of the ink will wash out. So remember if its a shirt a 100% polyester will give you great results. 2. Also look at the pressure, Fahrenheit and timing of the heat press. As i am not sure what item you are sublimating i can not tell you exactly about the timing and pressure and Fahrenheit. What i can say is with shirts you can do between 375F -400F for 60 seconds with a medium pressure. With hard substrates it varies. So all in all you can try these steps and let me know your progress. You can also give me some more information in relation to what material or hard substrate you are trying to sublimate and i can assist more. You can also reach out to me on IG or Facebook if you would like to chat. All of the links are in the description.

@atprints 2 жыл бұрын

@@IslandJewel take a look at my previous message to you and send me an update.

@IslandJewel 2 жыл бұрын

Thank u Allen! You're awesome! Yeah it was 100% cotton. I will try with what u advised.

@atprints 2 жыл бұрын

@@IslandJewel you are welcome.

@veronicareid5224 3 жыл бұрын

Following boss

@kioshilove6149 3 жыл бұрын

my blue line wont perfectly align and also its printing very dingy not vivid

@atprints 3 жыл бұрын

Hey, sorry to hear this make sure to go back over the steps slowly. If you wish to you can contact me on IG or Facebook @allan21thompson and i can assist you. Hope to hear from you.

@ronblack9615 2 жыл бұрын

Damn shame I have this same printer been sitting on my floor for 4 months

@atprints 2 жыл бұрын

Hi, time to take it out and do some printing. It’s a really wonderful printer.

@ronblack9615 2 жыл бұрын

@@atprints I finally set it up how do you turn off the auto mirror I'm trying to do easy subli

@atprints 2 жыл бұрын

@@ronblack9615 can you tell me which device you are using? Mac or windows

@ronblack9615 2 жыл бұрын

@@atprints windows 11

@atprints 2 жыл бұрын

@@ronblack9615 When you click on print, your print panel should come up. There should be 3 tabs at the top with Main, More Options and Matenance. Some times this can be different depending on the computer. However, click on More Options and at the bottom under Additional Settings you will see Mirror Image. I hope this helps.