ER Collet Essentials PART TWO - Why We Use, and Don't Use, Certain Collets

No video

ER Collet Essentials PART TWO - Why We Use, and Don't Use, Certain Collets - Haas Tip of the Day

Рет қаралды 45,888

Жыл бұрын

We've done a deep dive on ER Collets before! And now Mark is back to help us understand the important differences between Standard, Sealed, and Tapping collets in this Haas Tip of the Day.
Here is the link to our 1st ER Collet Essentials TOD video:
• ER Collet Essentials. ...
Here are links to our HaasTooling ER Collets and Toolholders pages where you can find all three of these types of collets:
www.haascnc.co...
www.haascnc.co...
Don’t miss any Haas videos. Click here: www.haascnc.co...
Need more reasons why you should consider a Haas? Check this out: www.haascnc.co...
If you enjoyed this video, please hit the like button and share it with a friend who’ll find it helpful . . . and thanks!
Follow Haas:
Facebook - / haasautomationinc
Instagram - / haas_automation
Twitter - / haas_automation
LinkedIn - / haas-automation
Code: 29R3Q6OJOBKY4QA3
Code: KSXVLUN4TMGDZROM

Пікірлер: 69

@Unix_Based Жыл бұрын

I am absolutely amazed about the good content Haas puts out here. I wish that every CNC-Machine company would put out such good content. This is soo imortant info for begginers in this trade and usually refer people to your videos when they lost control over the info listed in dry and boring books, making them rather confused than educated.

@swatcat7928 Жыл бұрын

That odd size is called Metric :)))

@matthewbudz4733 5 ай бұрын

No it’s not

@fredericoeusebio9770 Жыл бұрын

Never been less than 500m from a machine like these in my life yet this is to entertaining...

@markterryberry4477 Жыл бұрын

For taps, we would need a set of Tap Collets for Inch, and a different set of Tap Collets for Metric. Even though they are close (1/4-20 tap, and M6 tap), they are not exact, and tap collets must fit exactly, they have no range to them. For a Ø1/4" endmill (6.35mm) we could use either a 1/4" collet or a 6-7mm Standard collet (I'd use a 5-6mm collet for a 6mm endmill). Standard collets have a certain amount of range to them, flexibility, while Solid Sealed and Tapping Collets must be exact fits.

@BrilliantDesignOnline Жыл бұрын

Simply incredibly how organized and well presented your information is. I am Bi (Imperial and Metric) so I am looking forward to the metric companion video 🙂

@snake9100 Жыл бұрын

i hoped you create a video for this topic. Very nice. Please more videos with our best man Mark. please Edit: My dear Mark, many many sealed ER-Collets look different. "Our" look completely different. Easy to recognize.

@markterryberry4477 Жыл бұрын

There are special ER Collet Nuts built for coolant as well. These require seal-discs with rubber o-rings. Typically, the Solid Coolant Collets can handle much higher Through Spindle Coolant pressures than the o-ring styles. For more info on the other styles, check out: kzfaq.info/get/bejne/jbGZntBnyLevmGQ.html

@penpal222 Жыл бұрын

WE LOVE YOU MARK!

@stephie.m Жыл бұрын

Excellent video, excellent presentation skills & talent. You were made for teaching.

@petergamache5368 Жыл бұрын

Thanks, Mark! It looks like you've given us a tip top tap tip. :)

@markterryberry4477 Жыл бұрын

Uggh. But approved.

@TheDefeatest Жыл бұрын

Always great tips! thanks!

@jaybogataj Жыл бұрын

When it comes to metric taps, shanks are always rounded up numbers, so 4, 6, 8..

@TheBreaded Жыл бұрын

Huh, This Old Tony a few days ago now you. ER collets are the topic of the week.

@johnspathonis1078 Жыл бұрын

This Old Tony is not gay!!😄

@TheBreaded Жыл бұрын

@@johnspathonis1078 Oh no, what have I done!

@johnspathonis1078 Жыл бұрын

Hi Mark Enjoyed the video. As people outside of the USA watch these videos, it would have been good if you had briefly mention the different standards that taps are manufactured to. The various standards have different size shanks and square drives. So the table you showed at the start of the video was meaningless unless the standard was shown. For example I use taps manufactured to the JIS standard. Cheers John

@markterryberry4477 Жыл бұрын

Absolutely. Great comment. We'll hit this topic again with a broader reach - Metric, and different standards

@sibernetik4968 Жыл бұрын

Thanks a lot.

@guloguloguy 5 ай бұрын

THANKS, FOR THIS GREAT TUTORIAL ON THESE COLLET FEATURES, AND USE TIPS!!

@PaulOsbornesChannel Жыл бұрын

Good info, thank you!

@zharangcy6488 Жыл бұрын

Terimakasih anda sangat membantu saya👍

@joshuaboulee8190 Жыл бұрын

Very useful! Thank you!

@tobiasgelzleichter9894 Жыл бұрын

Sehr informativ.

@user-wl1oo8kq1h Жыл бұрын

Спасибо Вам за урок и видео. 👍👍👍

@MakeItWithCalvin Жыл бұрын

At my job, we tap 6061 aluminum on repeat jobs, and for our M5 form tap, we got a tap collet. For everyone M4 and below, we just use an ER collet with no issues! That said if you were form tapping stainless, it would be a different story.

@johanneslaxell6641 Жыл бұрын

So ¼" tap and M6 tap are the same size? Or do you mean that there is a need of BOTH imperial and metric collets? I'm sorry, but I like 19mm better than 0,748"... Yes I know that it is almost ¾" but not quite...

@markterryberry4477 Жыл бұрын

For taps, we would need a set of Tap Collets for Inch, and a different set of Tap Collets for Metric. Even though they are close, they are not exact, and tap collets must fit exactly, they have no range to them. For a Ø1/4" endmill (6.35mm) we could use either a 1/4" collet or a 6-7mm Standard collet. Standard collets have a certain amount of range to them, flexibility, while Solid Sealed and Tapping Collets must be exact fits.

@johanneslaxell6641 Жыл бұрын

@@markterryberry4477 Yes, what I was thinking 😉. Just pulling softly on the never ending "imperial or metric" machinist chain. "Tytan" guys did two excellent videos about why metric is better than imperial, that is better than metric, that is better than imperial and so on. Just having some fun 🤭😜🤣!

@ostry599 Жыл бұрын

Thank You! Great content! Greetings.

@Eluderatnight Жыл бұрын

ER25 is best collet size. Change my mind.

@user-bx3gu3st9b Жыл бұрын

I put a er16 in a er40, that way it gets twice as tight

@Saul_T_Ballz Жыл бұрын

The best for what? We use Er8,11,16,20,25,32, and 40 at my job and they are all great in certain applications.

@Yoggoth Жыл бұрын

But in woodworking there are only 1 size collets. Is woodworking more precise than metal machining?

@jerker2405 Жыл бұрын

No and no

@Manomano-wp9lj Жыл бұрын

what is the meaning of ER?

@34jasp Жыл бұрын

if only there was a system where you dont have to memorize all sorts of odd sizes.. oh wait there is! its called metric :)

@dakotareid1566 Жыл бұрын

exactly

@Eluderatnight Жыл бұрын

Put a man on the moon, then we'll talk. In the meantime take a league walk of a furlong pier.

@faxxzc Жыл бұрын

@@Eluderatnight spaceships have literally crashed because americans wrongfully interpreted metric units as imperial and have thrown the calculations off

@Eluderatnight Жыл бұрын

@@faxxzc better keep it all imperial then.

@bbarker5766 Жыл бұрын

Metric isn't without odd sizes!!

@vitorsouza-gx3tv Жыл бұрын

Could you put the subtitles in Portuguese ?

@haasautomation Жыл бұрын

vitor souza, you can enable the auto-translate function by doing the following: Click the "CC" button at the lower right corner, then click the "Gear Wheel" Settings icon. Click "Subtitles/CC" and then select "Auto Translate" and then select "Portuguese" from the list of languages.