Erbauer EAPS600 Airless sprayer Review on the job review no production crew just hard graft.

No video

Erbauer EAPS600 Airless sprayer Review on the job review no production crew just hard graft.

Рет қаралды 37,425

Жыл бұрын

Here's the Erbauer EAPS600 Airless sprayer that I bought and assembled a few days ago and reviewed in my last video .
buy me a coffee
ko-fi.com/handyandy
I'm.on job here and im a real person no production crew and no professional experience in that shasz.
mobile phones are handy for this kind of footage .
so the sprayer for 200 pounds is really good and does what it should. its best to buy better tips and differe t sizes too depending on what your using it for .
I'm using permagard permaseal damp proof paint
www.permagard.co.uk/damp-proo...
it's been thinned down for the sprayer went on ok .
I've also been using sandtex which you can purchase anywhere on the major retailer sites .
we are not sponsored by any company so bear that in mind .
you can find me on my socials
instagram
Facebook
etx

Пікірлер: 27

@graemelynch1539 25 күн бұрын

Great video thanks for this, I’ve just bought one and had no idea about the waste bucket! Instructions weren’t clear but your video was as I had also seen a few others but no explanation of set up. Also others had both hoses in the same bucket! So thank you

@handyandyuk 25 күн бұрын

Great .. instructions she far from perfect

@zaheersarwar7815 Жыл бұрын

Bought this used it once worked lovely, now it won't prime and spray! Cleaned everything the valve the hoses everything. But pump kicks in continuously but hardly any suction??

@handyandyuk Жыл бұрын

Push the ball release button on the pump ..

@lotoss1318 Ай бұрын

Hi, I have a question whether this painting unit has any filter inside? I know it's on the dragon and the gun but I'm not sure if it has a filter inside the housing. thanks in advance for your answer.

@handyandyuk Ай бұрын

There's a filter in the handle of the spray gun .. handle unscrews

@Hinchy1a 5 ай бұрын

Would this be any good with masonry paint? I wanna paint the render on the outside of my house - cheers

@handyandyuk 5 ай бұрын

You need to check the brand of paint it will tell you if it's suitable for sprayer . Most paints are OK for sprayer if diluted correctly. Depends on the make usually tells you on the side of tub

@Nickpaintbrush 2 ай бұрын

No chance!

@war3405 Жыл бұрын

Hi there, Can I use my Graco gun or hose with this ?

@handyandyuk Жыл бұрын

Yes I believe so

@BadBadGolfUk 9 ай бұрын

Hi 👋 I’ve got one of these and it’s constantly running it doesn’t go off after priming it just constantly on when spraying and when not spraying I’m not to sure what I’m doing wrong 🤦‍♂️ please help 🙏🏻

@handyandyuk 9 ай бұрын

Not sure . Only thing I can think over is not enough paint in the tub or it's the pressure that needs adjusting

@BadBadGolfUk 9 ай бұрын

Are both the pipes supposed to be in the paint after priming sorry I’m a roofer I’m just trying to save my daughter a couple of quid 💷

@handyandyuk 9 ай бұрын

@@BadBadGolfUk when using priming mode use a spare bucket 🪣 to make sure it clears any fluid eg water until the paint comes through consistently. Then you can re clip it back to the feed pipe and put it in the paint . Once you've switched it into spray from prime it should stop pumping until you start spraying . But you need to make sure the paint is constant through the nozzle of spray gun so spray it into the spare bucket .

@girlgamersims5637 4 ай бұрын

Do you roll brush after

@daylerhodes4748 3 ай бұрын

Nice tutorial thanks

@Pete.Ty1 10 ай бұрын

👍👍👍

@hakimvlogs6579 4 ай бұрын

How much did you thin the Matt emulsion by

@handyandyuk 4 ай бұрын

About 10 15%

@TubeFinlay Жыл бұрын

Mine was clogging a lot at the start, so I ran the paint through tights first (emulsion/latex paint), it was a lot better after. Out of curiosity, what pressure do you run it at when spraying?

@handyandyuk Жыл бұрын

Yeah definitely needs straining . I turned it right down then gradually up until pressure was right but don't not what pressure it was at probably about a third .

@sheazadhussain1500 Жыл бұрын

@@handyandyuk does this waste a lot of paint spraying than using a brush

@hakimvlogs6579 4 ай бұрын

What tip do I need for gloss?

@handyandyuk 4 ай бұрын

Depended on the gloss if it's oil based I wouldn't recommend putting it through the sprayer . Others you need a 211 or 315 tip