One of the absolute best instructional repair videos I have ever viewed on KZfaq! Finally somebody who understood the importance of creating a video with excellent focusing, lighting, keeping the camera still while filming, carefully selected close-up shots that are not blurry, great sound, easy to follow directions by Mark. Congratulations Mark! You have created the perfect instructional repair video ! ! Sadly to say, such great repair videos are rare on KZfaq.......
@joyhall66066 жыл бұрын
Just got done replacing the planetary on my 15 year old Pro600. The video was excellent, the only problem I had was finding a set of ring pliers small enough to remove the snap rings. Three sets later, it went smoothly, taking about 30 minutes. And I am no expert repair lady. Thanks.
@viennavaden18038 жыл бұрын
As a small business owner, I cannot thank you enough for this video. I spent less than 75.00 to buy new parts. Much more cost effective than buying a new mixer. Living on a small island in Alaska means I don't have access to 'repair' shops that might be available in larger cities.
@batcatatl6 жыл бұрын
Just bought a mixer for my wife and I'm almost hoping it will break so I can come back to this video and fix it. Great stuff!
@Auburnrph19 жыл бұрын
This is a great video! The only thing I would add is that it would be nice to have a list of all of the parts that were replaced! I feel enabled and ready to fix my mixer!
@chefscottharris11 жыл бұрын
Fantastic video Mark. Where I worked they where going to throw out a KitchenAid Pro 600 Mixer because the planetary assembly wasn't spinning, so I decided to bring it home before in went in the trash. Watched your clip and for $20 and 20 mins later I had a working machine again. Thanks ever so much you just gave life to somebody else s garbage, and a new toy for myself. Cheers.
@JDnBeastlet4 жыл бұрын
This is a perfect instructional video. Clear video, closeups as required, excellent explanations and perfect pacing. Great job, and very helpful. Thank you, Mark.
@christinasavage49 жыл бұрын
Thank you for your very thorough explanation of the parts and how to reassemble! I feel very proud of myself for fixing the mixer rather than paying someone else to do it.
@carriesteeves14316 жыл бұрын
When my Kitchenaid 600 Mixer suddenly died I thought it was the end of the world and started trying to figure out out how I would ever afford either the repair bill or purchasing a new one! I decided to search online for ideas on what might be wrong with it and landed on your video. I am now proud to say that my mixer is back in one piece and working beautifully. Your instructions were clear and easy to follow. I can't thank you enough!!!
@KeithVandenbergh8 жыл бұрын
Great video. The repair shop said it cost too much for them to justify fixing it. A $12 part and a couple of hours and it's as good as new.
@farouks66879 жыл бұрын
Mark, you are very thorough, very clear, if I had all my school teachers like you, I would've been an astronaut! thanks for the great video.
@MaGoo331009 жыл бұрын
This is the best video I have seen. It is so clear and to the point..... no wasted time!
@meadowlarkbakery80769 жыл бұрын
You guys are the best! Mark gives very detailed directions, and talks at the right pace so i can keep up. I grew up with 5 older brothers, and being the first little sister they made sure I had the 'basic knowledge on how do small repairs myself. So when both of my kitchen-aids broke down I found eReplacements on line, diagnosed the problem, ordered the parts, then watched the video. I'm proud to say both of my mixers are up and running at 1/4 of what it would have cost me to take just one of them to a shop .eReplacements will be my go to guys from now on.
@SusanTube28 жыл бұрын
This video was instrumental in helping me fix our Kitchen Aid mixer. Our planetary gear fell off while using the front attachment one day. We got a few new parts and hopefully it's good to go again! Thank you!
@MarkFreid11 жыл бұрын
The worm follower gear in my Pro 5 stripped pretty badly after many dense bread doughs. I ordered a new gear, new grease, then watched your video. Took apart the mixer following your instructions, cleaned everything up and am ready to complete the repair. This video is a lifesaver. Five stars!
@lizkenn11444 жыл бұрын
Excellent how-to video! Appreciate the clear, concise directions, close up shots, and the way Mark tells you what each piece is called so that you know what to order. Parts arrived quickly, and they were high quality. Great to have our mixer working again. We'll be ordering from you from now on!
@tombo963810 жыл бұрын
One of the best how to videos I have seen. Well paced, well videoed and clearly explained.
@dustihennenfent70796 жыл бұрын
This was a comprehensive & easy to follow video that allowed me to replace the gear on my 18 year Kitchenaid! Thank you so much! Looking forward to another 18 years with this mixer!
@hoveygrand10 жыл бұрын
Howdy Mark and many thanks to you for showing me how to fix a Pro 600 mixer for a handicapped lady that could not use a hand mixer. She cried when I gave it to her. Your a jewel!!
@lizatsharon10 жыл бұрын
This was very helpful, my father in law and I spent Sunday afternoon replacing the worn out parts. We saved a lot of money. Thank you very much
@toolwayx8 жыл бұрын
Mark, Thank you for this video. It made the difference between doing the repair myself and paying a lot of money for a repair I can do myself
@ArauzJimenez6 жыл бұрын
Thanks, I was making a cake with my wife and our Kitchenaid Pro 550 HD just stoped... this is the first video I found looking for help and gave me a LOT of hope. Thanks
@q500pilot9 жыл бұрын
Hi Mark, Great and informative video. One additional thing that your viewers need to watch out for. My mixer had the bushing from the gearbox cover actually work loose from the cover and slide down the shaft, resting on top of the retaining ring. This caused the damage to the lower (Bronze colored) gear and worm gear shaft assy because the top of the shaft was not supported allowing it to engage and disengage the gear teeth during operation. This effectively caused my lower gear (bronze) colored gear to wear excessively eventually failing. I inspected my cover for wear and cracks, none. So I reinstalled the bushing into the cover and peened the edges of the cover to hold the bushing in place should it decide to move downward again. I used an automatic center punch to accomplish the peening in five or six places to be certain. Your viewers could also accomplish this by replacing the gearbox cover. Other than that everything was accurate and worked exactly as described. Thanks for taking the time to help everyone with their appliance repair issues.
@roncline72179 жыл бұрын
Yesterday I received my KtchenAid Pro 600 replacement parts from eReplacement and followed the great instructions in the youtube video. When I powered it on, voila !!!!!!! all is well with the world . Thanks so much.
@karlytr8 жыл бұрын
I bought my KitchenAid Pro 600 stand mixer last week, and just wanted to open it up and make sure that it had a metal gear housing. It was extremely simple to do thanks to this video, which is by far one of the most clearly spoken and clearly illustrated how-to videos that I have ever watched! If I ever need to replace the gears, which I hope doesn't happen to me as it has for many others, I will not have any fear in taking on the project myself, with your video as my guide . Thank you, Mark!!!
@mollymkennedy9 жыл бұрын
This video was extremely helpful. I was able to replace ALL the gears which had broken down in my 3-year-old Kitchenaid. Instructions were very clear, and my unit is working great. Saved me a ton of money - thank you!
@stuarthumphreys199211 жыл бұрын
Mark's Kitchenaid repair videos are the best!!!
@thomasspivey58979 жыл бұрын
Easy to follow and replaced worm gear. Not sure my "600 Professional" might not be as heavy duty as they advertise. Caution when making bread. Dough hook tends to push up and destroy gear. Great easy instructions!
@Dadootiff8 жыл бұрын
This video made it so easy to fix my mixer and the parts I ordered from your company arrived in half the time stated. Great job. You will have my business in the future when needed.
@JordanNHoule8 жыл бұрын
Mark, this video made my week! I just bought a used Kitchenaid Pro 600 6qt mixer for $105. When it ran a very liquid grease the color of Hershey's chocolate sauce would drop from the attachment rod. I watch another video that explain why the grease would be that consistency and this video showed me in great detail what parts should go where and how to properly clean and re-grease the gears. All I had to buy was new grease and a pair of retaining ring pliers and it's good as new!
@AversaS210 жыл бұрын
Followed this step by step. I bought the parts I needed outlined in the summary. Once they came, went step by step with this video. By far the best guide out there. Works perfectly. Thank you so much!
@cusetjs77010 жыл бұрын
This video was perfect! I was able to order the needed parts and follow the video as I was repairing the mixer. I was afraid I would need to buy a new mixer, but thanks to the video I was able to repair the mixer. It did take me about 2 hours to fix, but I was taking my time making sure I didn't miss a step. I think I will schedule regular maintenance on the mixer and replace the grease every year or so. Thanks so much.
@MaZEEZaM10 жыл бұрын
were the parts expensive?
@cusetjs77010 жыл бұрын
About $150 dollars.
@MaZEEZaM9 жыл бұрын
thanks
@sarahmangone77856 жыл бұрын
This is awesome! my problem was a bit of leaking grease...just enough to know it was leaking. Had it in storage too long and leaking no doubt due to lack of use. The video was extremely useful and I'll have this done in a snap. Just waiting on my new grease to arrive! Thank you for sharing!
@graham52088 жыл бұрын
Got mine back together and it works like a charm...thank you so much Mark!!! Saved me a small fortune.
@kgmom225911 жыл бұрын
My issue was incompatibility of the new housing and the old hub gear. When I purchased a new gear, it dropped in just like in the video. My mixer is now up and running. Many thanks! Not sure I would have had the courage to take on this repair without your video.
@jamesbremner46748 жыл бұрын
Very helpful video, I appreciate how thorough and detailed the instructions were.
@TheFreespeech1016 жыл бұрын
this a great instruction video that I had found after working on our mixer. I had replaced the plastic housing 4 years ago. and should have replaced the gears at the same time but did not. today I replaced the gears all from ereplacement parts. had taken it apart before so knew most of the steps. someone asked what the cost was. I did not replace the planetary shaft but did all gears but the secondary gears. I replaced all the bearing parts. The cost for me was 65. which when you consider the price of a new mixer, it was well worth the price. Thank you for a great video. I saved it so that I can refer to it later.
@leanneh78788 жыл бұрын
thank you for the perfect instructions. And naming the parts... I was trying to order what I now know (THANKS TO YOU) to be the follower gear from the KitchenAid site and you were more helpful in identifying the parts i needed than they were.. and Now I can fix it myself.. AWESOME !!!
@mephi5t010 жыл бұрын
Very nice video. Straight to business and no noise or waste of time. Thumbs up. Also it looks like all his shafts are properly greased.
@kenwheelock69419 жыл бұрын
Great video! Thanks for the clear instructions. I was able to replace the worn worm follower gear. The hardest part was finding food grade grease here in Ecuador, but after a couple of weeks of searching I found some. The gear cost $20 here, the grease over $40. But, there is enough of it to replace the grease on the mixer a few times at least. Thanks again for the excellent video!
@suleymandemiray57706 жыл бұрын
I like it, I just found the broken part and ordered it. But very clear , easy to follow. Many thanks
@cindymarks97706 жыл бұрын
Thanks Marks, I appreciate you getting back to me. It never occurred to me that this might be the issue.
@jsingh161410 жыл бұрын
You just saved me lots of money. Now I am going to repair my machine myself the only issue now is where do I get all the gears. Thanks.
@melief4698 жыл бұрын
Mark, I repaired my mixer today thanks to you!! What a helpful video. It was so easy to follow. Bless your heart and soul for doing this. :)
@CompEngEvFan6 жыл бұрын
Your video was the perfect guide for fixing my wife's mixer. Thank you very much!
@TheIkaika77710 жыл бұрын
I’m glad my Kitchen-Aid pro 600 came with a metal gear housing years ago since people were complaining of it breaking. Great video!
@HUNG72F8 жыл бұрын
Great helpful video for consumers like me! After viewing this I think I can fix my mixer. Thank you so much Mark.
@bkindersley8 жыл бұрын
this was a really useful video. good, simple step by step instructions for someone who has little-to-no experience. one thing i would note is that when i replaced the worm follower gear, it was really tight around the planetary shaft. at first i thought it didn't even fit and i ended up having to hammer it down.
@kpalexan10 жыл бұрын
Video helped clarify the orientation of the shaft bearings. Flats need to be 'vertical', unlike shown in the parts manual on the KitchenAid website. Be careful not to put too much grease in the housing as it made reassembly difficult for me. All in all, a great help in disassembly/repair/reassembly. Thanks!
@mikenovak33446 жыл бұрын
You make repairing my kitchenaid mixer look very easy. Thank you for making this video. Very thorough and very easy to follow.
@johnfkerwin9 жыл бұрын
Very helpful video, very easy to follow for replacement of planetary shaft. Thank you!
@Livience6 жыл бұрын
Watching this video gave me the confidence to try fixing my own mixer, and it worked like a charm!!!! Thank you so much for this clear, easy-to-follow tutorial!! :D
@bburg19776 жыл бұрын
This is a great video, it would helpful to have a link to the parts used for the repair. Not just a link to the website. Thanks!
@ellentarbox38548 жыл бұрын
This is a useful and great video, when you just need to get something done! The timing and pace is good, no excess blah blah blah....
@davidpershing95511 жыл бұрын
Thanks for the video! While I'm no stranger to repairing appliances, your video made making the repair easy and painless.
@jdsfsdfshdgdfhdfsgh8 жыл бұрын
Great videos! I would love to see one with the kitchenaid DC motors, looks like they made some major changes to the gear, and different grease. No more black grease everywhere.
@annag33311 жыл бұрын
Was able to figure out the disassembly ok and just ordered my replacement parts. This video makes me much more comfortable with the re assembly. Thanks for posting it!
@rmax28 жыл бұрын
Very helpful thank you! This helps make the repair on my Wife's leaking Kitchenaid a whole lot easier to understand. I wish I had found your site BEFORE I ordered the Kitchenaid black repair grease, it's just already nasty looking stuff whereas the grease you are using would be my choice...
@AssNuggett8 жыл бұрын
Although the kitchen aid grease is ugly I do believe it is a food grade grease which is important.
@rmax28 жыл бұрын
Yes, the grease he uses in the video is food grade as well.
@miken0yii7478 жыл бұрын
I have a Pro 600 that's been making noise for several months and today while mixing bread dough the dough hook quit moving and just chattered. Being a former auto mechanic I figured I had a stripped gear. The motor runs. Looks like I'll be giving you all call soon. Thanks for the video and info.
@DavidEagle28 жыл бұрын
Thanks so much. This was super helpful. Just fixed my kitchen aid for the second time. Lasted 6 years last time! Hopefully longer this time....
@markjh97199 жыл бұрын
Your grade for this presentation: A+. My third time fixing my Kitchen Aid mixer!
@jaymelee2310 жыл бұрын
Thank you! I was unsure of buying this mixer because of fear of it breaking and then being out a lot of $$$. I feel confident that I could fix it by following your video. Thanks again.
@vadimbe97838 жыл бұрын
An excellent video, thank you for producing and publishing it! One thing I can't help but mention - KitchenAid mixer just sucks, I have the "Professional HD" model (it looks very similar inside to what you show here), the plastic gear box cracked, the accessory gear is worn and this is just after a few years of very light use (definitely less than once a month). And it looks like it's a pretty common problem.
@jimrorick53998 жыл бұрын
+Vadim Bendebury judging by the nr of views, i'd say KA quality has REALLY gone down over the years. We had one for over 20 years and it was a tank. this one is a cheap (not inexpensive!) piece of chinese junk!
@daved26616 жыл бұрын
Very helpful video. I used it to guide me through repairing my KitchenAid Pro 550.
@johnfracisco779 жыл бұрын
I think that the hardest step is the removal of the snap ring from the planetary shaft. Otherwise, it was a very straightforward activity, with the help of this video and having parts in hand.
@markabdoul51346 жыл бұрын
This video made it so easy to fix my mixer and the parts I ordered from amazon. Great job.
@SaturdayProjects8 жыл бұрын
Great video, after 20+ years of use, our kitchenaid mixer is in need of some tlc. This will be very helpful!
@liviacristinadorini10466 жыл бұрын
I am from Brazil, I live in São Paulo and its video was essential to repair my machine, thank you!
@amegreco16098 жыл бұрын
I was able to fix it. I ended up replacing both bearings and the worm even though none of it looked damaged and the fit was nice and tight and no more knocking. thank you!
@IndicamGuy10 жыл бұрын
Some of the most excellent video and instructions I have seen on KZfaq
@rfuilrez10 жыл бұрын
I don't understand how some one who is obviously mechanically competent as yourself could replace THE ENTIRE gear train of this mixer, and then cheap out on 2 small bearings. Which, aside from the motor bearings, are the fastest turning bearings in the whole assembly. Don't get me wrong, the video does a very good job at explaining for non mechanically inclined people (I happen to not be one of those). Excellent instructions.
@arunabasnayake52589 жыл бұрын
Thank you for the detailed video. It was invaluable when it came time for me to overhaul my 15 year old KitchenAid Epicurean. I ordered the parts and grease from eReplacementparts and they shipped the same day! Excellent service. My KitchenAid was back up and running, like new, in a matter of hours after the parts arrived.
@mosfun9 жыл бұрын
This is terrific, thanks. The knob broke off, and when I looked it up, it's actually molded onto the stem thing....so when I do get around to doing that repair, I'll wait, and look at the gears, because I'm sure they'll need something!
@amirsamina78610 жыл бұрын
Listened to it found helpful, now going to move on to the actual task of working on my machine, which is missing the beat. Thanks
@zeusmendoz11 жыл бұрын
Omg! This was so helpful!!! I have had a kitchenaid mixer sitting in my bakery broken for almost 1 1/2 yrs and finally got fed up with my dad about just letting it sit there. I hope u guys sell the replacement parts cause I'm going straight to ur website to purchase what I need. Thanks a million. Just in time for christmas too! ^_^
@carlapayne27256 жыл бұрын
Thank you so much!! The instructions were very clear and easy to follow. I fixed my mixer and saved a ton of money... many thanks!
@crockerkay9 жыл бұрын
This video was very helpful. I was able to determine the parts I needed. I watched the video as I replaced the parts. My mixer sounds so good! Thank you for excellent instructions!
@denjax19706 жыл бұрын
Thank you very much thanks to your very knowledgeable video I fixed my wife's stand kitcheaid mixer.👍👍👍👍👍👍
@raycarney90846 жыл бұрын
My following gear was badly worn but everything else seemed okay so I just replaced the one. When I put it back together, it made a lot of grinding noises so I took it apart again. Is there any way of telling which parts need replacing other than just visual inspection? I have compared my parts to new ones and there is no discernible difference. Excellent video by the way, I wish everyone else used this as a learning template. Great visual, timing and well rehearsed. If you weren't working from a script, you have a damn good memory!
@mariag349 жыл бұрын
It is the best video, easy to understand easy to fix............i hope they make more videos and we can save some money!!
@TeeDubb12 жыл бұрын
Video was dead on accurate. I was able to diagnose the problem and successfully repair our mixer with no issues at all on the first try. Thanks for a very helpful video! Fast shipping on parts too!
@MrMacd14411 жыл бұрын
Hi Mark. Great video. I replaced all the gears on my mixer a year ago after watching this. The planetary would not spin under the slightest of loads because the worm follower gear was worn badly. One year later and the worm follower gear is a mess. We use the machine very heavily, but I'm surprised that the oem part lasted almost ten years and the replacement worm follower wore after one year. In reassembling the mixer, I always felt that the worm gear had a little too much side to side play in
@roberttal81827 жыл бұрын
Great Video..explained everything with the right amount of detail. Thanks
@tlazz026 жыл бұрын
Making me look like a hero to my wife! Well done on the video explanations.
@FIXTechGuides6 жыл бұрын
Thank you! Glad we were able to help out!
@Nollala11 жыл бұрын
Thanks so much!!! I was so upset when my mixer broke!! This video helped us repair it!! It works like a charm!! We appreciate this video so much!!!
@r.beachy8 жыл бұрын
Very helpful video thank you for taking the time to show each step.
@alisaeed798710 жыл бұрын
This video was really helpful I fixed my mixer thank you so much 😊
@bryanewbank29038 жыл бұрын
Thank you. Answered my question about how to repack the gear box, as well as showing correct installation of the washers around the bearing on the front of the worm axle. A bit confused about the comment about "replace it" - I think you meant the cover, yes? Not the bushings? The worm gear does seem to have quite a bit of play, and even though the two bushings have "dog-eared" flanges, it looks as if they will be able to spin, or at least move... Anyhow, THANK YOU.
@TheAwesome7589 жыл бұрын
Great Video!!! I followed each of ur instructions and it worked but the speed at the stir increased like crazy how do i fix? it also it turns off after a while.
@joanncola15488 жыл бұрын
Great video for replacing the gears in the Kitchen Aid 6 quart mixer.
@annaracicot15138 жыл бұрын
This demonstration was VERY helpful.
@danielmurguia40216 жыл бұрын
Very helpful, thanks for being there for us!
@Babu-kr3cr6 жыл бұрын
This looks really helpful. I bookmarked it for future reference.
@AlessioSangalli11 жыл бұрын
Great video! You are really good in explaining. The audio is very clear also, unlike most videos on KZfaq. Thanks!
@russellmancillas446411 жыл бұрын
Very good video, slow and easy to follow, more than I needed for my situation, but it helped me determine how to fix my mixer. thanks.
@NicholasLebo6 жыл бұрын
Gave all the info I needed, worked like a charm.
@jennigriffiths739011 жыл бұрын
Amazing video - thanks so much. My drive-attachment gear is not spinning unless you push it inward. Not sure what's wrong, but hopefully this video will put me on the right track!
@aarondoud48306 жыл бұрын
Thank you for putting this video out. Worked great!
@grouchozeppo11 жыл бұрын
Great video! Except for the fact that I broke my plastic gear housing (ordered the new one), the instructions were right on! Mixer is as good as new! Thanks much! - HS
@salvatoreaversa11458 жыл бұрын
This video saved me a couple hundred dollars...twice! Thanks!