ESP8266 Monitor its Own Battery Level using Blynk IoT for Battery Powered Projects

No video

ESP8266 Monitor its Own Battery Level using Blynk IoT for Battery Powered Projects | Voltage sensor

Рет қаралды 22,734

Жыл бұрын

In this project, we will build an IoT-based Projects in which ESP8266 Monitor its Own Battery Level using Blynk IoT Cloud.
***********
( Source code and required files )
When you subscribe to our channel and comment, the link will be shared with you instantly. Thank you

Пікірлер: 549

@cyberwireless1540 22 күн бұрын

Awesome...! Excellent work... Even though I have to slowdown the video, it was too fast for me 😂😂

@TamirLimani.RepairPort 22 күн бұрын

github.com/repairport/blynk/releases/download/files/voltmeter.new.blynk.zip

@TamirLimani.RepairPort 22 күн бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@isarawut 9 ай бұрын

Hello, I have subscribed to the service.

@isarawut 9 ай бұрын

thank you

@me1996do 10 ай бұрын

Good job 👏 ‏‪

@hafizsaqiburrehman7789 8 ай бұрын

a very nice way to explain

@TamirLimani.RepairPort 8 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@tongng8827 14 күн бұрын

i like the presentation, it easy to understan

@TamirLimani.RepairPort 14 күн бұрын

github.com/repairport/blynk/releases/download/files/voltmeter.new.blynk.zip

@TamirLimani.RepairPort 14 күн бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@kombanvr-fp5wd Жыл бұрын

Thanks broo

@churchilljc1231 3 ай бұрын

Hello , i have subscribed to the service

@TamirLimani.RepairPort 3 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@dilshaddil9294 Жыл бұрын

thanks a lot brooooooooooooooooooooooooooooo

@Pawel-xg4tg 11 ай бұрын

Hi. Can i generate the URL endpoint to see these measurements on my own server?

@stilyanpaskov9846 5 ай бұрын

Just perfect to monitor my LiFePo4 battery packs

@TamirLimani.RepairPort 5 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@sumitd4u 3 ай бұрын

Negative pin of voltage detection module not needed?

@TamirLimani.RepairPort 3 ай бұрын

enough as i show

@legendne 3 ай бұрын

I'm already subscribe you.🥰

@TamirLimani.RepairPort 3 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@neerajpandey6585 2 ай бұрын

great work , but i have a doubt there are some videos which says to connect 2 resistor in series apart from this circuit ?

@TamirLimani.RepairPort 2 ай бұрын

It happens that way too. But if the connection is wrong, the microcontroller will fail.

@haziqrzl4475 5 ай бұрын

nice project really helpfull

@TamirLimani.RepairPort 5 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@Aziz-ot4cs 10 ай бұрын

Amazing

@TamirLimani.RepairPort 10 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@sazlisaad1976 9 ай бұрын

Thanks for sharing

@TamirLimani.RepairPort 9 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@ardikasaputra3131 4 ай бұрын

hi, i just subscribed

@TamirLimani.RepairPort 4 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@faxfax362 5 ай бұрын

Your code would be ideal for my next project! Thank you if you can share it with me!

@TamirLimani.RepairPort 5 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@SanRoSKR_3 4 ай бұрын

Thank u .

@TamirLimani.RepairPort 4 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@pradeeppinto1276 8 ай бұрын

good job 👍👍👍

@TamirLimani.RepairPort 8 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@falihrby_ 7 ай бұрын

I have already already subscribed

@TamirLimani.RepairPort 7 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@davidcromapix9083 3 ай бұрын

I am working on this project (2024-04), I need to know if the ACs712 DC sensor module can work? Thanks for sharing

@TamirLimani.RepairPort 3 ай бұрын

Try

@satreaaji 7 ай бұрын

Not a bad idea, keep in mind, voltage dividers use resistors, and resistors will also drain the battery

@TamirLimani.RepairPort 7 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@djimini2relaxsound518 5 ай бұрын

Super idde TOP

@thijsweiland 10 ай бұрын

Is it also possible to make the esp send me a notification when the voltage gets to low?

@TamirLimani.RepairPort 10 ай бұрын

Yes

@gothboiclique7873 7 ай бұрын

Very well done, bro!! May I request for your code, I will also try it for our program. 🙏

@TamirLimani.RepairPort 7 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@user-fr7pw1gv7f 5 ай бұрын

Thank you

@TamirLimani.RepairPort 5 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@abhishekbhagat2839 9 ай бұрын

Informative video

@TamirLimani.RepairPort 9 ай бұрын

Thanks

@user-cv5xf3tc1l 6 ай бұрын

very interesting this will onblock me on the small project i have

@yo-qd2oh 4 ай бұрын

Nice vid

@ns_creations6844 6 ай бұрын

Spr

@TheSolbeach 5 ай бұрын

Nice Job 👍

@TamirLimani.RepairPort 5 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@infostudy0262 5 ай бұрын

Thanks

@TamirLimani.RepairPort 5 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@youssifadam2645 6 ай бұрын

thanks

@300fajar 6 ай бұрын

very nice tutorial

@TamirLimani.RepairPort 6 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@hanylex7451 Жыл бұрын

Hi, I have a problem with the input voltage, if I realistically let in 17V, it shows correctly, as soon as I let in above 19V, the indicator stops at 17V and does not show more, is there any way to solve this? I have the scale in my Blynk up to 24V. I am just concerned with monitoring the voltage from the solar panel, which is around 20V.

@TamirLimani.RepairPort Жыл бұрын

Hello, yes, since the esp8266 analog pin can withstand a maximum of 3.3 volts, you can measure up to a maximum of 17 volts. it is not possible to increase it with the voltage sensor we have. but you can safely increase this range with the method I added. kzfaq.info/get/bejne/ateWjJufndG2mnk.html

@hanylex7451 Жыл бұрын

@@TamirLimani.RepairPort Thanks, but I downloaded the file and the code is identical for this basic version and there is no parts list needed to build circuit nr. 2

@hanylex7451 Жыл бұрын

@@TamirLimani.RepairPort So I tried here before the link , and through your second video where the link is and again it downloads me from both links and shows the original files that are for the first wiring. I have tried both Firefox Mozilla and Chrome, it still downloads the original files.

@TamirLimani.RepairPort Жыл бұрын

@@hanylex7451 I don't quite understand, this is the file in the link I gave for the other video. if you want to measure high voltage you have to do it. kzfaq.info/get/bejne/ateWjJufndG2mnk.html

@hanylex7451 Жыл бұрын

@@TamirLimani.RepairPort Yes, I want to do it according to the second video, but as I write, they are constantly identical files, as for this simpler version. I don't know the code for the Arduino, is it the same? Or is it different? I keep downloading the version for the simpler build/for lower voltage. I'm talking about the download for the second video.

@ZulfadhliZulkapli Ай бұрын

hello, done subscribed

@TamirLimani.RepairPort Ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@igorjunior5653 8 ай бұрын

good job🤘

@TamirLimani.RepairPort 8 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@Fritz106 3 ай бұрын

nice!

@TamirLimani.RepairPort 3 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@user-nb3xb9zj6c 11 ай бұрын

Teach to use with ESP32 please

@devendraraju3276 Жыл бұрын

I'm looking for a similar project. I need to monitor Voltage levels when it is directly connected to power which has 220v, but when power goes off it will be running on inverter which will see a voltage drop. I need to record these voltage drops. Can I do this with the same voltage sensor ? or Do I does it require any additional setup ?

@TamirLimani.RepairPort Жыл бұрын

Hello, I can help you, but I don't understand exactly what you want. Do you want to measure 220 volts energy or do you want to measure DC Energies?

@devendraraju3276 Жыл бұрын

@@TamirLimani.RepairPort I would like to monitor both the instances when my power supply goes off and when it switches to the inverter. It is essential for me to keep track of and document any voltage changes.

@abdulkadharj6498 4 ай бұрын

Bro I want link

@TamirLimani.RepairPort 4 ай бұрын

github.com/repairport/blynk/releases/download/files/voltmeter.new.blynk.zip

@TamirLimani.RepairPort 4 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@bobl703 10 ай бұрын

How do we then power the esp8266 with the battery while also checking the voltage with the voltage sensor? As soon as I unplug the USB cable, there is no power to the esp8266 anymore.

@TamirLimani.RepairPort 10 ай бұрын

You can power it via USB with an external powerbank. Or you can take the voltage from the source you measured (if there is enough voltage in the source - the voltage should be above 5).

@bobl703 10 ай бұрын

@@TamirLimani.RepairPort the power source is a 3.2 V battery. The battery powers the microprocessor just fine but when I connect it to the voltage sensor, then there is no power going to the microprocessor. I can’t use a USB cable or external power source because the device I am making needs to be battery powered and will be floating in my swimming pool.

@TamirLimani.RepairPort 10 ай бұрын

@@bobl703 You need to raise the voltage a little more. Also, since the nodemcu is wi-fi enabled, it consumes a lot of energy and the battery will run out in a very short time.

@bobl703 10 ай бұрын

@@TamirLimani.RepairPort ok thanks Tamir.

@tlsrinath8090 2 ай бұрын

Great project 👏🏻, i have subscribed the link pls

@TamirLimani.RepairPort 2 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@jean-christophecasado5343 2 ай бұрын

hi good job

@TamirLimani.RepairPort 2 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@tennis5126 Жыл бұрын

how to adjust voltage multiplier?

@TamirLimani.RepairPort Жыл бұрын

It is possible to set it from the "float voltage caliber = 0.00; //" section in the 22nd place in the code or from the 42nd section.

@XMAn-np1gn 6 ай бұрын

sehr gut

@TamirLimani.RepairPort 6 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@mohammedabdulhameed4257 Ай бұрын

Good

@TamirLimani.RepairPort Ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@deocreateme4294 25 күн бұрын

nice

@TamirLimani.RepairPort 24 күн бұрын

github.com/repairport/blynk/releases/download/files/voltmeter.new.blynk.zip

@TamirLimani.RepairPort 24 күн бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@nawo4805 Жыл бұрын

I've already did exactly as what you did bro but why when I'm checking the voltage of 1.5V battery, it keeps showing the voltage around 5V🙏😭

@TamirLimani.RepairPort Жыл бұрын

interesting problem is it only happens at low voltage

@XMAn-np1gn Жыл бұрын

You also need to calibrate

@user-is9bh6xu1b 6 ай бұрын

good

@TamirLimani.RepairPort 6 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@AsyrfAsmt 7 ай бұрын

I HAVE SUBSCRIBE

@TamirLimani.RepairPort 7 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@shiyamalans2148 2 ай бұрын

Subcribed sir

@TamirLimani.RepairPort 2 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@shiyamalans2148 2 ай бұрын

Thank u ❤

@shiyamalans2148 2 ай бұрын

Sir can we do with ESP 32 ??

@TamirLimani.RepairPort 2 ай бұрын

It can happen if you make edits to the code.

@KalpanaNarayan-z7k 12 күн бұрын

thankyou

@TamirLimani.RepairPort 12 күн бұрын

github.com/repairport/blynk/releases/download/files/voltmeter.new.blynk.zip

@TamirLimani.RepairPort 12 күн бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@fariszainuddin9842 6 ай бұрын

already subscribed and how do if find all those files

@TamirLimani.RepairPort 6 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@Anton-lh6si 7 ай бұрын

Hello, cool performance, could you share the source code? I want to check my battery remotely at home

@TamirLimani.RepairPort 7 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@marcelofabianzuccotti2616 10 ай бұрын

👍

@TamirLimani.RepairPort 10 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@matthiash.454 2 ай бұрын

Cooles Projekt 👍🏼 Code and circuit diagram ❓

@TamirLimani.RepairPort 2 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@hohichannel9146 7 ай бұрын

Do you export battery-level data?

@TamirLimani.RepairPort 7 ай бұрын

@muhamadsyahmi9838 Жыл бұрын

can use esp32?

@TamirLimani.RepairPort Жыл бұрын

Yes. It is possible to use it by changing the library name in the code and connecting it to the esp32 analog pin.

@anolrac7747 5 ай бұрын

What are the libraries should be installed

@TamirLimani.RepairPort 5 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@0124akash Жыл бұрын

Not accurate measurements sir ? Battery 12.7v, display 12.7v Battery 7.4V display is 6.9V How to improve this problem sir am using ESP32 wroom with I2C 16*2 LCD.

@TamirLimani.RepairPort Жыл бұрын

hello, you can get the result you want by changing the code on line 35.

@0124akash Жыл бұрын

@@TamirLimani.RepairPort what changing, and where is code sir ?

@illusionproductionillusion812 8 ай бұрын

💎

@TamirLimani.RepairPort 8 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@roobannarayanasamy6910 Ай бұрын

DONE👍

@TamirLimani.RepairPort Ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@asmitbasa911 6 күн бұрын

Subscribe already

@TamirLimani.RepairPort 5 күн бұрын

github.com/repairport/blynk/releases/download/files/voltmeter.new.blynk.zip

@TamirLimani.RepairPort 5 күн бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@markoeiskirch5833 9 ай бұрын

DANKE

@TamirLimani.RepairPort 9 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@luqmanhakim479 2 ай бұрын

how much voltage the sensor can stand

@TamirLimani.RepairPort 2 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@arifkyar873 Жыл бұрын

Acs712 icin ornek kod var mi akim olcumu yaomak istiyorum.

@TamirLimani.RepairPort Жыл бұрын

Malesef

@TechnoEveryday 6 ай бұрын

Great 🎉🎉🎉 How to get the code?

@TamirLimani.RepairPort 6 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@rullabcd 5 ай бұрын

Send link please, urgent.....Thanks nice video

@TamirLimani.RepairPort 5 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@syahidtrikusuma8156 10 ай бұрын

Can you make a tutorial for 8 voltage sensors, sir?

@TamirLimani.RepairPort 10 ай бұрын

My system also works for 8 volts. Can you explain in detail if you want something else?

@syahidtrikusuma8156 10 ай бұрын

@@TamirLimani.RepairPort Do you have an Instagram account or something else? so I can explain my problem in detail

@syahidtrikusuma8156 10 ай бұрын

@@TamirLimani.RepairPort I have eight 0-25v voltage sensors, one ESP8266 nodemcu, and several types of batteries. I want to make a monitoring system to directly detect several types of batteries using eight voltage sensors directly through arduino and blynk software. can you make a tutorial sir? or help me in more detail for my college project assignment.

@TamirLimani.RepairPort 10 ай бұрын

@syahidtrikusuma8156 To use 8 voltage sensors, there must be 8 analog readout pins. Nodemcu has only 1. Also, if the voltage is greater than 17, again nodemcu will not be suitable. You need to use esp32 to do what you want. Why 8 voltage sensors?

@syahidtrikusuma8156 10 ай бұрын

@@TamirLimani.RepairPort Sorry sir, I mean Arduino Mega 2560, can you make a tutorial for directly detecting 8 voltage sensors?

@josealbertovicentejobeto2555 6 ай бұрын

alimentação por bateria 64 / 5 000 I'm very interested in the battery power information.

@TamirLimani.RepairPort 6 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@MTechOver9000 10 ай бұрын

hello bro, where can I get the code? thanks

@TamirLimani.RepairPort 10 ай бұрын

The link has been shared, make the download. After 24 hours the link will be removed.Easy work.

@MTechOver9000 10 ай бұрын

@@TamirLimani.RepairPortthank you brother, good work!

@workatforce 10 ай бұрын

link?

@TamirLimani.RepairPort 10 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@user-yp7mc5sh6k 6 ай бұрын

hi can you share the link for the project?

@TamirLimani.RepairPort 6 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@anolrac7747 5 ай бұрын

How to verify the output in serial Monitor

@TamirLimani.RepairPort 5 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@davidcromapix9083 3 ай бұрын

the code and the diagram do not exist the links

@TamirLimani.RepairPort 3 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@PWUnleashed 8 ай бұрын

share coding

@ahmetttt10 11 ай бұрын

pil sarj oluyorken % kaç sarj olduğunu ardinio ile görebilirmiyiz

@TamirLimani.RepairPort 11 ай бұрын

Evet olur

@ahmetttt10 11 ай бұрын

@@TamirLimani.RepairPort nasıl olucak peki, pilin kapasitesini verdiği voltajdan öğreniyoruz ancak sarj oluyorken daha yüksek bir akım veriliyor pilin sahip olduğundan nasıl öğreneceğiz

@AriMatthias 9 ай бұрын

hello why is the voltage i acquired not accurate

@TamirLimani.RepairPort 9 ай бұрын

Hello At what volts does the problem occur?

@masthumcomp357 11 ай бұрын

Saya pakai batrei 9volt tapi kok muncul nya 11volt di aplikasi blynk

@TamirLimani.RepairPort 11 ай бұрын

You need to calibrate the code. For this, you need to read the A0 pin and rearrange the code accordingly.

@user-zo6qy8qf1f 10 ай бұрын

Source code ?

@TamirLimani.RepairPort 10 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@ArasyaArs 2 ай бұрын

hello, i have subscribes, now how i can get the code? i need to try.. thank you

@TamirLimani.RepairPort 2 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@audidp6463 4 ай бұрын

finally found it

@TamirLimani.RepairPort 4 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@djimini2relaxsound518 5 ай бұрын

kann ich auch 3 oder 4 Voltage Detector anschließen und 4 battery auf einmal überwachen ???

@TamirLimani.RepairPort 5 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@djimini2relaxsound518 5 ай бұрын

@@TamirLimani.RepairPort Danke !

@muhammadiqmalhaqeembinnaza7777 7 ай бұрын

where can i get the code?

@TamirLimani.RepairPort 7 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@Fritz106 3 ай бұрын

where can i find the links?

@TamirLimani.RepairPort 3 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@user-zi2oi6nz9z 9 ай бұрын

Hi, can I please have the code for this project

@TamirLimani.RepairPort 9 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@mendercnr38 8 ай бұрын

Multimetreyle 11.23 V ölçüyorum ama bu uygulamada 11.45 V gösteriyor. Kalibrasyonu hangi satırda ve nasıl yapmamız gerekiyor acaba?

@TamirLimani.RepairPort 8 ай бұрын

35. satırda 15.8 yazan bir kısım var orada küçük değişiklikler yaparak kalibre edebilirsiniz 15.8'i daha aşağı düşürmeye çalışın.

@mendercnr38 8 ай бұрын

Teşekkürler@@TamirLimani.RepairPort

@arijitmajumder478 7 ай бұрын

Thanks brother ❤, need the code

@TamirLimani.RepairPort 7 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@arijitmajumder478 7 ай бұрын

@@TamirLimani.RepairPortthank you brother ❤, it worked.

@ahmadmahyudin6289 Жыл бұрын

Sir, the code can't be opened, can you help?

@TamirLimani.RepairPort Жыл бұрын

of course with pleasure. where are you stuck, download is not possible? I checked now the link is working. Can you try with another browser?

@mfa03__55 10 ай бұрын

Can you give me a code?

@TamirLimani.RepairPort 10 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@velumurijayanth1065 9 ай бұрын

Please can you send the code and circuit diagram

@TamirLimani.RepairPort 9 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@mohammedojil4184 7 ай бұрын

can i have coding and files? already subscribe

@TamirLimani.RepairPort 7 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@savinduishan4416 10 ай бұрын

Can I get The code?

@TamirLimani.RepairPort 10 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@biaswrecked5634 2 ай бұрын

Hi, i subscribed can i use the code

@TamirLimani.RepairPort 2 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@sayedmisfar7266 5 ай бұрын

good job brother 👌👌 send the code

@TamirLimani.RepairPort 5 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@Sa1Jho Ай бұрын

hello there would you mind that i can have some code that would be cool!

@TamirLimani.RepairPort Ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@muhammadjamali5746 10 ай бұрын

Code bro??

@TamirLimani.RepairPort 10 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@nexianne 10 ай бұрын

Code please

@TamirLimani.RepairPort 10 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@MuhammadZubair-mq9jy 3 ай бұрын

Please code link. I have subscribed to you

@TamirLimani.RepairPort 3 ай бұрын

Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.

@mendercnr38 8 ай бұрын

7.4 yada 14.8 Volt içinde çalışır mı bu sistem?

@TamirLimani.RepairPort 8 ай бұрын

Evet çalışır 17 volta kadar ölçebilir.

@mendercnr38 8 ай бұрын

Bunun için esp bağlantısını yaparken araya direnç atmak gerekir mi peki mesela 7.4 V test ederken

@TamirLimani.RepairPort 8 ай бұрын

Hayır voltaj sensörü üzerinde direnç bulunmaktadır.