How to build a barn door -3 panel design DIY
Рет қаралды 247,670
4 жыл бұрынUPDATE ** I now have plans with measurements on my blog at www.eternalharvestdecor.com
BARN DOORS ARE HUGE right now! I have made a few different designs and I have my favorites for sure, but I have never built this design before and I love new projects! GUYS this one is so easy and it is a great first time door if your new to them. You will need to use a miter saw and possible a finish nailer if you have one.
So, I got a request to build a 3 panel barn door and I thought this would be a great tutorial! Its pretty simple and requires minimal tools.
To start, here's what you will need:
Miter saw or circular saw: dlnkr.com/r?r=aHR0cHM6Ly93d3c...
4 - 1x4x8 pieces of poplar from Lowes or HD
3 - 1x2x8 pieces of poplar
3/4 birch plywood or another hardwood ply like maple or oak.
1- 1x6x8 primed pine board for header piecs
titebond glue - dlnkr.com/r?r=aHR0cHM6Ly93d3c...
clamps - I use Pony Jorgensen clamps like this dlnkr.com/r?r=aHR0cHM6Ly93d3c...
white primer - dlnkr.com/r?r=aHR0cHM6Ly93d3c...
white paint - dlnkr.com/r?r=aHR0cHM6Ly93d3c...
caulk - dlnkr.com/r?r=aHR0cHM6Ly93d3c...
spackle - dlnkr.com/r?r=aHR0cHM6Ly93d3c...
optional - finish nailer with 3/4 inch nails
I usually suggest this hardware for hanging.
dlnkr.com/r?r=aHR0cHM6Ly93d3c...
SAFTEY GEAR I LOVE:
Carolina work boots - dlnkr.com/r?r=aHR0cHM6Ly93d3c...
Madgid glasses - dlnkr.com/r?r=aHR0cHM6Ly93d3c...
RZ mask - dlnkr.com/r?r=aHR0cHM6Ly93d3c...
ISOtunes ear protection - dlnkr.com/r?r=aHR0cHM6Ly93d3c...
Thanks so much for stopping by! I am happy to answer any questions you may have! You can also find me on the following socials.
Pintrest - / eternalharvestdecor
Instagram - @eternalharvestdecor
Facebook - / eternalharvestdecor
Tiktok - @eternalharvestdecor
KZfaq - • Woodworking tools for ...
______________________________________________
DISCLAIMER: Some of the above links are affiliate links which means I could receive a small commission. There is no additional cost to you! Thanks so much for supporting www.eternalharvestdecor.com it helps me provide new and more helpful content!
@17forever64 Жыл бұрын
Most of these door builds are done by men and they are not very detailed. Thank you for taking the time to talk about each process, I really appreciate it.
@CG-dd9tb 17 күн бұрын
You reckon genitals are relevant for door videos?
@trollusa3206 14 күн бұрын
As a man making this for my woman, I’m pretty happy about this video. My girl told me how to make it and I was like doesn’t sound right send me video. Yeah my girl left out the nail gun and a few boards lmao. God bless her. Thanks for the video😊
@clgaines2006 3 жыл бұрын
Out of all the barn door diy, yours is one of the best because it looks really really good with minimal tools. I've seen some look nice but they use like 8 or 9 different tools the average person didn't have. Great great job!
@EternalHarvestDecor 3 жыл бұрын
Thank you!! So glad you found it helpful!! Thanks for watching!
@TheRebekahk 2 жыл бұрын
I cannot thank you enough for making This video. I’m almost finished making my door and it looks amazing. It was such a good first project for a beginner (like myself). I love watching DIY videos showing what women are capable of doing. Thank so much!!
@EternalHarvestDecor 2 жыл бұрын
Oh yay! This makes me so happy! Congratulations on your first big project! Thanks for watching
@YukonDemon 3 жыл бұрын
This is fantastic! Had almost the exact same thing in mind but just a single panel door. Nice to see how good it could turn out. (As long as I don't screw it up.)
@NovaTattooArt Жыл бұрын
Thank you so much! Our house came with 4 missing closet doors, and we will be making these for the 2 bedrooms. You’re a huge help!
@EternalHarvestDecor Жыл бұрын
So glad it was helpful
@FredMcIntyre 4 жыл бұрын
The door looks great Brandi, awesome job! 😃👍🏻👊🏻
@EternalHarvestDecor 4 жыл бұрын
Thanks Fred!
@karencarter142 3 жыл бұрын
Oh my gosh your so amazing I’m trying to do a barn door for my bath and this works perfect...keep up the good work 👏🏾👏🏾you inspires me 🌺
@EternalHarvestDecor 3 жыл бұрын
Awe thank you!! I’m so happy, good luck on your build!
@beckymurphy5399 Жыл бұрын
Hi, LOVE your vids and talent 🎉🙌🏻👏🏼 Question: If you were making a barn door situation for a 12’Wx8’H (maybe 9’) space that had to be attached to a CEILing😬 #noheader Where would you begin to source such a project?
@Rally4Life1982 Жыл бұрын
Thank you for this video. We were going to buy a premade one for $460 and we ended up making this same door for about $180 (plus the finishing gun, and extra clamps that I can use again later). I didn't do the middle ones as I find the surrounds look a little more modern and simple. Only thing different were the sizes of wood in Australia. 19mm Ply + (3) 86x19x2400 pine, (3) 42x19x2400 (reduced from 42mm to 38mm so it was flush)
@EternalHarvestDecor Жыл бұрын
This is so great! I’m so happy it was helpful! Sounds like you did an amazing job
@jasminebyenkya5991 3 жыл бұрын
It’s nice seeing a woman doing woodwork it inspired me thanks :)
@EternalHarvestDecor 3 жыл бұрын
Awesome! Thank you for watching!
@CG-dd9tb 17 күн бұрын
You reckon genitals are relevant for making doors?
@wendyp818 4 ай бұрын
I love it you have inspired me to build all new interior doors like this ! Thank you :):)
@sstarot333 2 жыл бұрын
Awesome video. I like this design. I need to replace a 36x76 exterior door. Best video about making a door I found so thank you so much
@EternalHarvestDecor 2 жыл бұрын
Glad it was helpful! thanks for watching
@danielszabo5555 2 жыл бұрын
I can't give a big enough like for this one, you helped me so much, thank you 😃
@EternalHarvestDecor 2 жыл бұрын
That makes me so happy!! Thanks for watching
@ZacJones 4 жыл бұрын
Great looking barn door build! Also your back drop looks awesome!
@EternalHarvestDecor 4 жыл бұрын
Melrose Design Company thank you so much!! I had fun with that back drop lol 😉
@Rgnfrazier 10 ай бұрын
You are awesome. Thank you. Finally easy plans for a barn door.
@RISENGRINDWORKSHOP 4 жыл бұрын
Project turned out great. Keep up the good work!
@EternalHarvestDecor 4 жыл бұрын
RNGPRODUCTS thanks so much! I’m tryin haha 🙌🏼😅
@headpiece8 3 жыл бұрын
Thanks so much for this video. I have limited space so I have limited tools and this makes a nice looking door with minimal tools. I built 3 wooden lockers for my historic firehouse and was looking for easy way to build doors. Engine 47 thanks you!!
@EternalHarvestDecor 3 жыл бұрын
You're very welcome! That is so awesome!
@Janky2912 6 ай бұрын
Sometimes keeping it simple is the best thing to do
@Off-Grid 2 жыл бұрын
Will be building our doors soon. Thanks for the tips
@candygranger1618 3 жыл бұрын
Awesome video! I needed this... I’m making 8ft double doors for my bathroom!😝
@tsnstt 3 жыл бұрын
I’m doing the same 8ft double door but in the garage to store my table and miter saw!! Love this idea and it’s so easy and hides the imperfections! I can’t believe I didn’t come up with this idea. Thanks to this lady she saved the day!!
@EternalHarvestDecor 3 жыл бұрын
YAY!! So glad it was helpful
@MakeOn 4 жыл бұрын
Clean, modern look and it looks great! Nice build and video as always! 😉👍
@EternalHarvestDecor 4 жыл бұрын
Thank you 🙏🏼
@EternalHarvestDecor 4 жыл бұрын
Make On I actually kinda love the simplicity of it haha
@MakeOn 4 жыл бұрын
I do too, Brandi. Not everything needs to be unnecessarly complicated or overbuild. Of course it all depends from the surrounding style, but there can be Beauty in very simple geometries and lines that complement another piece instead. And that doesn't make them any less outstanding than the other. And that door, will stand out whatever it's surrounded by.
@grobertson2008 4 жыл бұрын
Made your door and used it as a barn door for our pantry, thank you 😀
@EternalHarvestDecor 4 жыл бұрын
Oh this makes me so happy!!! 🙌🏼🙌🏼
@dnelsonmccarthy1500 3 жыл бұрын
that is my plan
@feriusfza 4 жыл бұрын
Wauw, really good and great job. Like it very much and nice result
@EternalHarvestDecor 4 жыл бұрын
Thank you!
@squeekhobby4571 3 жыл бұрын
Thanks for bringing this
@EternalHarvestDecor 3 жыл бұрын
You bet
@ThePatriciaPatrick 2 жыл бұрын
Best video I have seen so far. ❤️❤️
@EternalHarvestDecor 2 жыл бұрын
Thank you so much!
@vincentbarry7917 2 жыл бұрын
Awesome work-through, thanks for putting this out there. I used this to make 2 of the same style doors, and due to cost I just used the off cuts from the plywood, which were more than enough. FInal dimensions 42x84 each. Plus saved a lot of money!
@hoodiejolo 4 жыл бұрын
using this as inspiration to make double barn doors, thank you! I'm using similar dimensions to you, and my home depot only had 1.25" finish nails as the minimum length, do you think I'll run into any issues? or should I be getting 3/4" finish nails instead?
@EternalHarvestDecor 4 жыл бұрын
OH DANG!! Yeah thats tricky you would just need to be kinda careful on your nail gun settings so you dont go through the other side
@arshadabbasi1055 Жыл бұрын
very simple and easy method thank you
@mechammatt 4 жыл бұрын
Looks good. Great video!
@EternalHarvestDecor 4 жыл бұрын
Thanks Matt!! I appreciate it 🙏🏼
@inspectrgajit 3 жыл бұрын
Brandy you are awesome!
@EternalHarvestDecor 3 жыл бұрын
Awe thank you! ☺️
@eng.knowledgeseeker 3 жыл бұрын
salute ,your an artist
@italyfrance3388 3 жыл бұрын
I love this and i'll be trying this diy thank you much.
@EternalHarvestDecor 3 жыл бұрын
Great! So glad you found it helpful :-)
@Othermails08 4 жыл бұрын
Awesome job!
@EternalHarvestDecor 4 жыл бұрын
Thanks for the visit!
@hollandcustomwoodworking5932 3 жыл бұрын
I’m glad I’m not the only who has kids that enjoy coming out into the shop/garage lol
@EternalHarvestDecor 3 жыл бұрын
LOL they always make an appearance ha ha
@dimitriosagrellis6597 Жыл бұрын
perfect ! i like you work bravo!
@heiditiredmommyartist4423 2 жыл бұрын
Just about to do this same project- bur have to do them hung up 🤪
@tsnstt 3 жыл бұрын
She’s so adorable and saved me so much money!!! Just picked up 3/8” thick 8ft. X 4ft. and will frame it with 2”x1” so I can use the door hinges from Home Depot ($3ish for a pair). With number being so expensive this route is cheap! Oh yeah, and Home Depot gave me a discount for having damaged plywood. Love you Home Depot!! And lastly, love this lady, too adorable can be my sister ☺️
@EternalHarvestDecor 3 жыл бұрын
Thank you! This whole comment made me so happy! Good luck with your project!
@tsnstt 3 жыл бұрын
@@EternalHarvestDecor I actually finished my project and I cannot believe how easy it was! It was my first time doing something like this and it came out so beautiful. I wish I can show you some picks you would be so proud. All inspired from you!!! Thank you thank you and thank you!! Happy Easter, Eternal Harvest Decor!!
@EternalHarvestDecor 3 жыл бұрын
@@tsnstt I would love to see pics!! I have an IG account and email account you could send pics to! Congratulations I’m so happy for you
@dariolima5957 3 жыл бұрын
Parabéns... você e muito inteligente.
@SDMPoahway Жыл бұрын
No thank you. I love it. I’m getting ready to build one for my guest room
@howardbecdove9780 3 жыл бұрын
Really enjoyed, thank you. Subscribed.
@EternalHarvestDecor 3 жыл бұрын
Thanks for watching!
@CarlosVazquez-bp1ou 2 жыл бұрын
Me gustó su trabajo simple ,facil y bonito
@EternalHarvestDecor 2 жыл бұрын
thank you!
@mellisapena5571 Ай бұрын
Thank you so much !!
@yosoymariela5646 3 жыл бұрын
Loved your video💙😍
@EternalHarvestDecor 3 жыл бұрын
Thank you for watching!!
@robcharles3363 Жыл бұрын
Thanks for this simple build. I want ones 9 feet high (by 8 ft wide/or two 4 foot wide doors) so I'll cut panel pieces according and put the mouldings also on the back of the doors, covering the seams.. Ps I couldn't find link for recommended trim.
@bbikermama 2 жыл бұрын
Love the no measuring!!
@EternalHarvestDecor 2 жыл бұрын
fun trick! haha
@mountnbykr 3 жыл бұрын
Thanks. I followed your design to create double barn doors.
@EternalHarvestDecor 3 жыл бұрын
Yay!! I’d love to see a pic! If you’re on IG send me one 😉🙏🏼
@mountnbykr 3 жыл бұрын
@@EternalHarvestDecor done, tagged you on IG
@andycastellanos68 Жыл бұрын
Great job 💯
@EternalHarvestDecor Жыл бұрын
Thanks 💯
@djcichlid7746 3 жыл бұрын
Great work! How much did just all of the wood cost? I framed a corner in my cellar and am building a small sliding door for entry. Also the edges were a lot easier your way, thanks
@EternalHarvestDecor 3 жыл бұрын
DJ Cichlid thanks! it ended up being around $150 for materials I believe since I used hardwoods and maple trim.
@siyong14 2 жыл бұрын
Hi, do you think I can turn this into a saloon door? Or would it be too heavy?
@lgarciapisco2304 3 жыл бұрын
Linda puerta. Saludo desde PERÚ. PRINCESA
@dpdp006 3 жыл бұрын
Liked detailed explanations 👍 I looking for lighter door for closets is there any way we can make hollow core 1 panel door like this any suggestions what would be used. Nothing is available in market now a days must be done diy.
@patrickmann3553 3 жыл бұрын
Use same process and use thin panaling
@iwatchcool1 Жыл бұрын
Great results and good tips, thank you. I heard that spray paint is not good to inhale so I would suggest to wear a respirator. 👍
@EternalHarvestDecor Жыл бұрын
Great tip!
@karenkreisel9801 2 ай бұрын
This is how I would make a door!
@mariegardiner7034 3 жыл бұрын
I need to do a full sheet of plywood. I wonder if it will be too heavy? Should I do two instead I wonder?
@Thenewgards Жыл бұрын
Very nice
@HunzaStoneAge 8 ай бұрын
❤ nice greetings from the Himalayan mountains
@zjtr10since80 Ай бұрын
Good job
@goingtoparis9404 10 ай бұрын
Impressive!
@faithhendren9154 3 жыл бұрын
quick question i really like your video, i really want to make the door but i was wondering if there’s any reason why you don’t run a 3/4” trim under the 1x4 boards
@EternalHarvestDecor 3 жыл бұрын
Not sure I understand where you wanted to see trim? I wanted the shaker style look so adding anymore trim would detract from that. Hope that answers you questions
@jjadaddy 2 жыл бұрын
You do wonderful work, Brandi. I'd like to ask why you trimmed out around the door? Ty.
@EternalHarvestDecor 2 жыл бұрын
Thanks! I really like the trimmed out look and it covered the plywood edges and gave it a beautiful finished look
@rougemoney878 2 жыл бұрын
Can you use this method on existing doors?
@JeanSantana000 3 жыл бұрын
Amazing job
@EternalHarvestDecor 2 жыл бұрын
Thank you! 😄
@magdalenaberger3655 3 жыл бұрын
is the trim necessary? I'm going with the birch and the poplar for the border, but do i really need the trim too? What are your thoughts?
@EternalHarvestDecor 3 жыл бұрын
I felt like it made the edges look more clean and hold the door straight but not sure its absolutely necessary
@meganwatson4795 Жыл бұрын
So what does the back look like?
@_dedona 3 жыл бұрын
Any suggestions for adding a few inches in width and height for a sliding door in this style? 4'X8' plywood doesn't allow for my overlap.
@EternalHarvestDecor 3 жыл бұрын
Well you can over hang the molding on the bottom but that would be seen from both sides. you may have to build it with two sheets of plywood cut horizontally and the seam covered by the trim. But it would be visible from the back side. you could also use 1x material and do a slatted look and get the length you want. I have a few other barn door options you might want to check out. Thanks for watching
@lynnblomberg1162 4 жыл бұрын
Great job I’m on a couple of your doors only 5 panel
@EternalHarvestDecor 4 жыл бұрын
sweet!!
@nicolemarcelli2371 Жыл бұрын
Really great video. You are so meticulous and the only person to actually use caulk. I was wondering if you design the inside of the bathroom door the same way as the bedroom side.
@jorrba3934 3 жыл бұрын
How does the back of the door look? I didn't see that on the video.
@iamceino 3 жыл бұрын
Good job.
@EternalHarvestDecor 3 жыл бұрын
Thanks!
@jreschke5 3 жыл бұрын
I am building two of these right now with your plans. Thanks. I didn’t sand it good enough and primed one, is it okay to go back and sand now?
@EternalHarvestDecor 3 жыл бұрын
Jai awesome! Yeah you can go back with a 220 or so and sand between coats! 🙌🏼
@jreschke5 3 жыл бұрын
Eternal Harvest Decor we did it. First time ever doing any kind of wood work. Thanks for the help. The painting was by far the hardest part. I’ll have to dm you a pic
@EternalHarvestDecor 3 жыл бұрын
Jai woohoo!! Congratulations! So glad it helped! I’d love a pic!
@millionairehealthwell710 3 жыл бұрын
I love you!!
@paulshaw9355 2 жыл бұрын
Do you have video on how to put track up and how to measure as to where the track goes
@EternalHarvestDecor 2 жыл бұрын
I just saved the whole process in my Instagram highlight reels. I just hung one in my daughters room. I don’t have a KZfaq video on this process yet. Each track is a little bit different, usually the check comes with the measurements that you will need to figure out where the rail should be installed. You will need to install a header board above the track which is just a one by six pine screwed into studs, this helps with the weight of the door.
@annasmith38 3 жыл бұрын
I saw the question about what you did with the back side of the door but I was wondering how you open the door from the back side if it is just flat? Could you also trim out the backside the same as the front side or will the door be too thick? Is there a handle you can add to the back?
@EternalHarvestDecor 3 жыл бұрын
You can totally put a handle on the back side as well. You could trim it out but if you do that I suggest using a thinner center piece of plywood, like .25-.50” thick or using thinner trim. Ideally the door should be 1.25-1.75” total in thickness. I have just used a router to create an inset handle on the backside before too. Just some ideas!
@pedrobustamante9337 Жыл бұрын
what size are the trim pieces? Im looking to copy your door model to make doors to my pantry. I like the look you made.
@EternalHarvestDecor Жыл бұрын
These are 1x4s I believe
@angelinam9399 3 жыл бұрын
For a 30 inch door opening what size door would you make width and height? Thanks!
@EternalHarvestDecor 3 жыл бұрын
Measure your width and height from the edge of the molding and make sure the door will cover both door frame molding pieces and that’s the width and height you want. Hope that helps
@ANANDKannan-oc2ns 7 ай бұрын
U work supper ❤
@elaforte173 2 жыл бұрын
I can’t tell you how many times I’ve watched and shared this video. I have a window 40 inches wide and 65 inches tall. I want to do 2 doors for it. Can I still use the wood you suggested or do I have to go to 1/2 inch plywood. Will it be too heavy for a window that doesn’t go to the floor. Thank you so much for this. Crossing fingers you answer this before I go to hardware store tomorrow.
@EternalHarvestDecor 2 жыл бұрын
Oh this is a tricky question, will you hang it the same way? If so, you could do either thickness. I did 3/4” because most doors are that thick and the hardware works for that thickness. So just check your hanging hardware and make sure it works
@broomvikin 3 жыл бұрын
Thanks for the video. Very simple to follow. Just a quick note, your affiliate link for the clamps goes to the page for paint.
@EternalHarvestDecor 3 жыл бұрын
Ahh thank you! I’ll fix that ASAP!
@jberglan 3 жыл бұрын
@@EternalHarvestDecor still goes to the paint and not the clamps :)
@paulshaw9355 Жыл бұрын
Hi Did you work your wood at all with jointer and planer? I build doors with pine panels, and all my doors end up not laying flat, turned up on each side a little. Do you know how I can stop this and have my doors lay flat Thank you
@EternalHarvestDecor Жыл бұрын
Hi there! Pine from big box stores tends to come home wet. I take a moisture meter with me to the store if I buy from there. Otherwise I go to a lumber yard where I can be sure the lumber is dry. I do have a jointer and planer, but I did not use them for this door. You can get a moisture meter and buy flat DRY pieces and that will help a ton. Also make sure your pieces are as flat and straight as possible by looking them down from the end like a telescope.
@johnpittaway7649 Жыл бұрын
I need that sandpaper holder
@KOMOOX 3 жыл бұрын
Could this be used as an exterior door? @eternalharvestdecor
@lesliemc3043 3 жыл бұрын
Do you have a locking mechanism since this is a bathroom door?
@EternalHarvestDecor 3 жыл бұрын
No this was for a customer between her master bath and master bd not the toilet room. No need for locking in this instance but I can see needing one in other situations and they do have hardware you can add.
@ameurhebbal7958 3 жыл бұрын
Nice
@EternalHarvestDecor 3 жыл бұрын
Thanks!
@angelcerela 4 жыл бұрын
👏👏👏👏
@dwaynecurtis351 3 жыл бұрын
Great looking door. How would you build a 55” wide door?
@EternalHarvestDecor 3 жыл бұрын
I just did one actually I used two pieces of ply and added a seam down the middle I’ll be posting that video soon
@DaybyDaywith3 7 ай бұрын
Hi! Wanting to make this door for a storage closet. Not wanting to hang it, instead having it open out like a traditional door. What do you suggest doing differently?
@EternalHarvestDecor 7 ай бұрын
That would require a different style frame. Lowe’s and HD sell pre made hollow core unfinished doors for less than you could build them, maybe e look into those
@DaybyDaywith3 7 ай бұрын
I have but i need a custom fit. Most if not all pre made doors are bigger than i need. Thanks for the reply!
@kevins3646 2 жыл бұрын
Nice design, I would show the other side as well.
@EternalHarvestDecor 2 жыл бұрын
Thank you! Cheers!
@hiltongardeninn2623 2 жыл бұрын
How did you learn how to build doors? What does the other side of the door look like? Thank you.
@EternalHarvestDecor 2 жыл бұрын
I learned by doing. I’ve built a lot over the years now. The back of this one is solid just a piece of plywood painted. But you could route a design into it too
@sujithpriyantha2351 Жыл бұрын
Good job super
@EternalHarvestDecor Жыл бұрын
Thank you
@timgean8954 Жыл бұрын
How do you cut in the borrow slit for the floor guide or is the guide not necessary?
@EternalHarvestDecor Жыл бұрын
I actually use these floor guides instead. I like them better amzn.to/3TRwuwY
@zimpler8340 4 ай бұрын
That long can of primer gets an “Oh my!”
@elizabethyoung5110 2 жыл бұрын
Would this need to be changed at all to make it for a pocket door?
@EternalHarvestDecor 2 жыл бұрын
Just measurements. I’ve never done a pocket door before so not sure I’d just make sure the measurements work
@clifwilks 2 жыл бұрын
door looks fantastic....next time you paint in the garage ya might want to cover other things to protect from over spray.....I noticed your daughters black Jeep was turning white. lol
@williamporter9604 2 жыл бұрын
I was thinking the same thing. Lol. Nice job though. I Give her credit .
@alliehunter9896 3 жыл бұрын
Just what I wanted. Did you paint the back side too?
@EternalHarvestDecor 3 жыл бұрын
Dang! I accidentally deleted your last question! So yes the short answer is 1x2 is actually 3/4”x1.5” the milling process makes them smaller then listed. Hope that helps thanks for the question 🙌🏼
@EternalHarvestDecor 3 жыл бұрын
And yes both sides are painted
@paulshaw9355 2 жыл бұрын
So the door is 1.5in thick?
@milespauli8308 2 жыл бұрын
I was thinking about doing this but just for a normal door. I was thinking I'd overhand the face trim on each side, and then just rip the length on the sides of the door. Just worried the seam will become visible over time...
@EternalHarvestDecor 2 жыл бұрын
You could totally do that
@lorenanderson2949 3 жыл бұрын
Are there panels on both sides or just one side?
@EternalHarvestDecor 3 жыл бұрын
Loren Anderson on this one it’s only on one side.
@livingmr1 3 жыл бұрын
Could I get away with 1/2” ply instead of 3/4”? I have a 50” opening so my door will be a full sheet. Thinking 1/2” to save money and reduce weight. Thoughts?
@EternalHarvestDecor 3 жыл бұрын
Yeah that wouldn’t be a problem just may have more chance of bowing. So if you do go that route make sure you get it into a flat surface right when you bring it home and get the frame built and on ASAP. Then let cure laying flat after paint. Sometimes they get paint in them and people lean them up to dry and the bend so just keep that in mind. Good luck!
@livingmr1 3 жыл бұрын
Thank you. I’ll share when it’s finished.
@darioushdadyan1288 4 жыл бұрын
what do you think about MDF?
@EternalHarvestDecor 4 жыл бұрын
ali dadyan mdf would work ok, it’s just a bit heavier and I just hate working with it 🤣
@Sophia-lc9ow 2 жыл бұрын
What about the other side? If it’s a barn door style you’d want both sides to look the same right?
@EternalHarvestDecor 2 жыл бұрын
Not in this case and not always no. This was going on a bathroom door so my customer wanted a solid back. I also don’t do the backs of closet or pantry barn doors. But if you wanted a design you could route one out or add 1/8” pieces to the back
@jililicious4 3 жыл бұрын
How large are the clamps.
Shara Woodshop Diaries
Рет қаралды 358 М.
Kirill Multitool
Рет қаралды 48 МЛН
Hammer Down Woodworking Tracy Maxfield
Рет қаралды 119 М.
Andrew Thron Improvements
Рет қаралды 17 М.
MILANAROLLER
Рет қаралды 12 МЛН