*Join my Cisco CCNA Full Course* : course.learnabhi.com/ Our course is available in two languages English and Hindi. Very Easy to understand. As a beginner, you are going to love this course. Somehow, if you are not happy we are giving a 100% Money Back Guarantee. 1000+ Students have already enrolled and doing great in their careers. *Join Now if you are really serious about your IT career* : course.learnabhi.com/

1,2- sending data 3,6- receiving data 4,5 - DC + in poe &as a Sender in GEB 7,8- DC- in poe & as a receiver in GEB

I am basically commerce graduate, but after seeing your video, immediately purchased Crimping Tool and repaired network cable myself. You saved me time and also money. Thanks a lot. @Raghu

finally someone explaining clearly the use of brown and blue wire ! for some reason i've miss it for more than 3 years xD

Brilliant lecture on LAN Cables, it can be easily understood. Thanks very much for this owner of video.

Brilliant exactly what I was looking for. Thank you breaking down what the individual colour cables and the pins do in a ethernet cable

This video should be on the top suggested videos when looking for “how ethernet cable works?”

Thank you sir....Your video helped me a lot today i had my practical examination ....I saw your video before going to my college and it helped me a lot....i was able to do the practical very easily...THANK YOU SOO MUCH SIR💗💗💗

Hi - very interesting video - lots of useful info. I am stuck on a problem. I want to run a Cat5B cable from one room to another (wall plate to wall plate) each end terminated with a Keystone 8P8C RJ45 (female to female). These are toolless connectors. One end will connect with a patch cable to an internet modem and the other end will connect to a router with a patch cable. I have tried to wire straight through and (i think) cross over. But I'm not sure about cross over. To do cross over i switched the Orange and Green pairs on one end. Not able to make a connection. Any suggestion appreciated and thanks.

Special thanks for making this video know I understood all color coding and pin usage.

Grate explaining I had been looking all day on the web for something with this level of technical detail, thank you,

Exactly what I need to know. Thanks for the video Sir.

So detailed my friend thank you.

Thank you a lot brother about this video.

Very simple and straight explanation..... Good Job !!

very clearly described the topic.thanks a lot

Thanks for the video, hope I will be perfect my actual tomorrow :)

Thanks sir , your vdo will definitely help for my exam

Supppperrb Boss, Thank you so much. I think i can't forget it. You have lot of technical knowledge about RJ 45.

Concept is very clear, Well explained brother.

That is very helpful for me. Thanks

thanks My dear Teacher You are the best Teacher

Amazing explanation sirrr🙏🙏🙏🙏

Thank u sir , for cleaning my all doubts in a simple way

Wonderful.

This was the best video ever. Thanks a lot 😊😊❤️😊❤️❤️

Great video sir... Please do more topics

Nice video sir.... &....thanks for sharing knowledge..

It's awesome... thank you so much again 👍

Very informative video in easy way. Thank

Hi your video is excellent

thanks man...i hope you give us a video about all communication protocol..waiting for it...

So if I want to connect a PC to serial port of a switch or router basically with both rj45 port, I can terminate as rollover? Thanks for the video

NICELY EXPLAINED...THANKS

Best video... 💙

Thanks a lot describe in simple way... Easy to Anderstand 👍✌

good knowledge...thanks.

Thank you , was straight forward .... muy bueo

Hello, I made a EIA/TIA 568B Straight Through Cable to connect me laptop to router. It is working fine. Did I make a mistake? I will use this cable to connect router to switch, then new cables from switch to tv, playstation, audio amplifier, laptop. Please advise. Also thanks for the great video.

🙏🤝Excellent

You are awesome. sir!!

nice man ! thanks

Thanks for the video

👍 Great Job

Ty man for explaining

Thank You for information.

Thanks for u sir

Great concept

Thank You!

Very helpful

what coding is used to connect old and new routers to use one of the old router as a repeater?

Hi Sir, I have a CAT 5 Cable which has (orange-white, orange),(Blue-white, Blue),(Green-white, Green),(Brown-white, Brown) color combination starting from pin 1 on both side still its works from router to PC? How? I'm not able to find this color combination on internet. also I have CAT5e straight-through cable which has EIA/TIA 568B standard but sill works fine when connect from router to PC because according to you router and PC should connect through cross-over cable.

thank you so much, I watched this video after 4 years

Thank alot,

Thanks sir 💖

Nice explanation ❤❤

Nice explanations

Q.1-1&2 is sending data &3&6 is received the data. Q.2-4578 is poe,it is usually cctv &Ip phones.

Come to find my rj45 wall sockets were terminated A. I already terminated the keystones in the network closet as B and the connection works. Should I re-terminate the keystones in the network closet as A?

I like your video...doing great job

Excellent 🎉

can you explain a video showing an application how it works in commands to understand the osi model practically netstat nbt stat ping etc

Hi I like your video. Thanks

Thank you

Excellent

Thank you❤

thank you very much I will try to answer your question one by one 1,pin number 1and 2 are used to send data pin number 3and 6 are used to recieve data 2,pin number 4,5,7and 8 are used as power

Very very nice sir

ty for your clip

Brother can you please tell me which color code should i use for lan cable between router and dvr for both ends. Please reply !!!

Very good SIR

Q1.1&2 r senders and 3&6 r receivers Q2. 4,5,7,8 is used for Poe devices ex: Poe telephone, Poe cctv

I inspect my cable and most of it is 568 B straight and it's also usable for router to switch to pc , router to router or pc to switch to access point

Superb teaching thnx

Very super explanation bro

Brilliant

can i use a underground 12 pair cable as a cable from POE injector to camera to hook up a sony SNC EP520 camera with HPOE 24v Ac?

Super sir

Hello, Great video.. can someone confirm this for me. At 4:40 and on, he talks about the 568B coding straight through. I think the depiction of the RJ45 Jack on the right hand side of the screen should actually be rotated 180 degrees. Shouldn't it look just like the one on the left? I.E, shouldn't the key part (thing that clicks in) be located facing left? In this way pins 1-8 really do match up with each other. This may be nit-picking but I'm really trying to understand this. Thanks very much.

Make ur vedio in hindi,you have a great knowledge,

Bhai abhishek trimmer pehle ya ye cables😊😊

Can i also use straight to connect pc and router?

good bro

What kind of connection is required for connecting secureye dvr (camera hub) to sharp modem+ router??

So who else is here for Teacher Jehyo's assignment?

In a gigabit Ethernet connection if pin 4578 is use for sending and receiving data then which pins are use as a power source

Dear friend, please let me know that should I use straight or crossover cable in this scenarios... 1. First router to second router second router to third router to fourth. 2. And while I connect these four routers to each other should I use regular Ethernet to Ethernet ports or Ethernet to uplink ports or uplink to uplink ports to connect all the routers. 3. i used an optical fibre internet connection given with a modem which has two Ethernet ports on the first company provided router and the rest of the three routers are TP link Wi-Fi routers. 4. Also do I have to change any settings in the router like enable or disable DHCP. I will be grateful if you could help me out on this thanks once again

1) Pin 1 and 2 are used to send data while Pin 3 and 6 are used to receive data 2) Pins 4,5,6and8 are used for power purposes especially for PoE devices.

Hi 👋 Thank you for helping us But I have a one question please I have two pc and I need to connected with each other via cable ( I need to made the cross over ? ) Right ? OK How if I told to you I’m made the ( straight through way ) and connected successfully with each other and I makes ping and it pinged successfully

can you tell me please what is type A and type B, and thank you very much it is best and use full video .

Please create a lecture on SNMP

1,2 sending & 3,6 receiving 4,5 DC+ & 7,8 DC-

1,2 for sending and 3,6 receiving the data. And 4,5,7,8 for power

Bhai i want rip eigrp ospf complete configuration redistribution in one network on packet tracer

can i use my own color coding straight through?

Q2: WHAT FOR USING PIN NOS. 4, 5 , 7 AND 8

❤️❤️

Now the answer is pin no 1& 2 use for sending the data where pin no 3& 6 received the data. And also pin no 4,5,7 & 8 are used for POE and vise versa.

Switch se thin client device ke liye kaun sa cable banega And pc to switch ke liye kaun sa cable banega

Good