It's fast, it's easy, and it's fun! Watch Lenny show you the fastest way ever to load a magazine! This is our item #2718 and you can find it here: www.glockstore....
Пікірлер: 181
@joshuahains16757 жыл бұрын
Lenny needs his own PBS show. It can follow Motor Trend on Saturdays and repeat after This Old House on Sundays
@Tmanaz4803 жыл бұрын
The Yankee Gunshop
@mr.wabbit58744 жыл бұрын
I find it helpful priming the angle loader from the ETS speed loader with oil making the bullets slip easier
@ChrisB.C.7 жыл бұрын
I like all of Glock Store's videos. I like Lenny. He's old-school cool. Still, nevermind comparing mag loaders, or this mag loader, or other mag loader. Why does anyone buy ANY mag loader?! I just honestly don't see the point. To me, part of the fun of a trip to the shooting range IS loading mags! I literally love spending the night before a range trip, watching a good movie, and thumbing individual cartridges into a pile of magazines. It's like family time for gun people.
@garywarmanen39877 жыл бұрын
cbc82 I did that one time and the range I went to said I couldn't bring loaded magazines into the range so I had to empty all 10 magazines. So that was the last time I went there.
@ZERO_420697 жыл бұрын
cbc82 it depends on how much you shoot, i always take 30 ar 15 mags and 10 33 round glock mags when i go shooting so its alot of reloading so something like this helps out alot
@TheSuburban155 жыл бұрын
Take a pistol class where you are shooting 750+ rounds in 2 days, and you'll understand why people buy magazine loaders.
@Stellar0011005 жыл бұрын
When you want to spend more time shooting than loading. That's why.
@delmarrey90773 жыл бұрын
I had one of these that lasted about 300 rounds. There’s an angle inside where the heel of the cartridge slides at an angle. It’s made of plastic so after awhile it gets scared up and the cartridges will not slide any more. So it’s in the trash now. The angle needs to have a metal insert to make it last.
@robizemgunreviews97452 жыл бұрын
The best mag loader I ever seen! I'm about to order 1 now! Thanks for this review.
@74HDJOE4 жыл бұрын
Bought a couple the other day one for a 9mm/40 Cal double stack. That one worked like the one in the video. The other loader was for my Sig Sauer single stack P220.45 acp. I followed the instructions word by word. I was able to load the first and second magazines with great difficulty, more difficult than the guy in this video. The third magazine I was only able to load three bullets and gave up since not only were the bullets jamming going down the slide with the plunger, once they got to the feeder where they are supposed to load into the magazine they would jam and not feed into the magazine. I went on their site and addressed the.problem to whom ever is in charge of their web site. I'm still waiting for an answer. I've watched various videos before buying and they made it look so easy. So if not only did this thing not work right but I'm hoping that it didn't mess up my mags which are brand spanking new. My advice now is buy the maglula.
@firecrow79732 жыл бұрын
3:27
@ryangi57 жыл бұрын
That seems like it would damage the magazine's feed lips.
@moxbroker6 жыл бұрын
Matt - from what I understand it has two ramps in the body. The first positions the round like you would by hand. The second provides the down and in motion from your ammo hand. Because of the distances it clears the lips. It’s also why those areas need to be lubed so that the ammo smoothly passes through the alignment and, ultimately, the loading. I’d still like to see some videos from people using this kind of reloader with 6 months of use on. See if it does do damage to the mags or not.
@hardcore44763 жыл бұрын
moxbroker Right! I want to see that as well and thought the same thing Matt above mentioned. Funny I just got the maglula thinking it was the best and fastest loader just recently, but not sure now....
@sabregunner13 жыл бұрын
@@hardcore4476 it’s designed to not mess up your feed lips, unless you smack the magazine in hard. Check the yt vids from the manufacturer. Also, I think the majority of bad reviews are people using it wrong. But like moxbroker said, just some silicone spray will help make it smoother
@hardcore44763 жыл бұрын
@@sabregunner1 Yeah not so smart people tend to do that with excellent invention quite a bit.. Do you have one and how’s it holding up after time? Considering getting one!! Love the Maglula one!
@sabregunner13 жыл бұрын
@@hardcore4476 i do have one. its been holding up, but havent been able to use it lately as i havent gotten to the range. I take the maglula with me as well, as a secondary loader
@crazeebear74 жыл бұрын
This ETS loader is a great tool. It takes less effort if you dab some gun oil to the rails and bottom of the feeder .
@joecole33696 жыл бұрын
nah i'll still stick with lu la, i feel pain for my mags just watching the push down lol
@Greenjeans20204 жыл бұрын
Later this year I started shooting PCC in USPSA. PCC allows very large capacity magazines. A real pain to load. I had the UpLula loader and it works fine. I just received the ETS loader this week. Much faster. Oil it like the instructions suggest reduces the effort needed to load a mag.
@henrykfu2 жыл бұрын
I actually used to enjoy loading magazines by hand, it's the tactile feeling of putting in each round. However, now in my 50s my thumb gets very stiff and sore especially with glock magazines. This looks like a great gadget, I'll have to try.
@Race9003 жыл бұрын
The reason it is so hard for you to push is because you must add oil first, and the bullets MUST be facing upward. Put the base on your chest, face the bullet points upward, then pull. It is super easy and requires very little effort
@mayno89222 жыл бұрын
Ok so i'm a newbe here. Where do I get a bullet holder like what I'm seeing in these videos?
@mayno89222 жыл бұрын
Or should I say bullet tray.
@user-mz6ts4xn6i2 жыл бұрын
Buy it online. Search for the name
@xBRProductionsx Жыл бұрын
@@mayno8922 a year late but for anyone else wondering, that’s how they come in the box of ammo.
@JM-vj9fl4 жыл бұрын
Don't forget to add a drop or two of oil as described in the manufacturers(ETS) video. It makes the process nearly effortless.
@kathyzed88704 жыл бұрын
best loader ever, you can not have a 9mm or 40 cal without owning this gadget, absolute must,
@joshmarauder6 жыл бұрын
high capacity magazine license.. california is a joke
@snchillin5 жыл бұрын
Not in Texas
@whiteshadow17713 жыл бұрын
Move to NC. no capacity limits
@joshmarauder3 жыл бұрын
@@whiteshadow1771 i dnt have no limit where i live thank god
@E52O42 жыл бұрын
For some reason, I can’t get the last couple of rounds in with this loader. I bought a Speed Beez loader for my double stacked magazines. Worked great! So satisfied that I ordered a Speed Beez for my Shield Arms S15 magazines.
@jeremyc39113 жыл бұрын
You have a great radio voice!
@dgriffin60742 жыл бұрын
Yeah, but I've got the perfect face for radio.
@tc96z14 жыл бұрын
If you have 20 mags this tool would make sense to use b4 range day. Maglula not as fast but way more practical for 3/5 mags.
@Goldchucker15 жыл бұрын
Hi Lenny: The loader looked great in all the videos I saw so I orderd one from Amazon ($14.00). That's right. $14.00. It came and I could not even get one round to load. The unit was warped at the opening and would not let the first .40 cal round load in my Glock 22 mag. So assuming it was defective, I sent it back and Amazon replaced it. The second one arrived with the same issues as the first one. So I again sent it back and requested a refund. I truly feel that Amazon was sent culls that the factory knew were bad. I'll stick with my Lula. What's the hurry to reload anyway.
@oldrogue42475 жыл бұрын
I don't believe "warped." It's rigid polymer. Did you have the mag oriented in the right direction? You sure you pushed the mag all the way in until you heard a snap? Did you apply a couple drops of oil first? Are you certain it was an ETS C.A.M. Loader, or just the cheapest one that looked like an ETS ? Amazon sells a lot of Chinese knock-off stuff, and $14 is half price. Did you order the right model for your pistol?
@carlitoandsandraadventures11924 жыл бұрын
I ordered one right from ETS and 95% of the time, nothing loads, no matter how much pressure I put on it... something jams up and then when I pull the mag out, 3 loose rounds come spilling out; and yes, the mag is all the way in and in the right direction. To me, it's not worth it.
@rickgoddard69252 жыл бұрын
I'll stick my maglula doesn't seem to press to hard o n my mags and follower
@tanyakhashchuk-lb9tu2 ай бұрын
mine came in i tell you trying using it first time its hard you have to sure practice it takes some time to get used to it but when i did it was easy to load my gun.
@seikibrian86413 жыл бұрын
The usual expression is "It's the best thing since sliced bread," but if you want to change it to "better than sliced bread" who am I to argue?
@alexJohnson91193 ай бұрын
Seems like a good way to fk up the feed lip on a non-subgun mag.
@Dallencst7 жыл бұрын
This loader would be nice for my 33 round magazine.
@sfrancescon7 жыл бұрын
Is there a more in depth video about this? From what I just saw I'm not to sure about this loader. Maybe for more open mouth mags but it looks to me like it might damage the mouth of the mag? Never the less it is interesting
@PkwyDrive135 жыл бұрын
It doesn't jam them into the feed lips. There's a ramp in the loader that loads them in at an angle just like you would by hand.
@oldrogue42475 жыл бұрын
Dood! It's plastic! Steel mags beat a plastic loader every time.
@exgenica3 жыл бұрын
@Hard Core and others...Wouldn't lubricant migration into the cartridges be a problem for anything but very short term storage of a loaded magazine?
@richardkluesek43017 жыл бұрын
Reminds me of the old Grendel P10 .380 system using AR stripper clips with a jig on top of the slide to feed the fixed magazine, clever.
@mspeir6 жыл бұрын
Why does he remind me of Mike Rowe?
@thelastjohnwayne4 жыл бұрын
I can see it and the voice also
@jessepresley92336 жыл бұрын
Imagine being the 1st man to eat an oyster. Musta been very hungry!
@skycorrigan65112 жыл бұрын
This dude has one of the coolest voices. Reminds me of the Halo voice
@frozentundra74463 жыл бұрын
Lenny, I think you are "above your skies" on this one.
@marryson123 Жыл бұрын
does it damage the feed lip by pushing it down hard like this all the time?
@merlesommers28175 жыл бұрын
Do not waste your $. For double stack, it takes a gorilla to load the last 5 rounds, and dings brass. Uplula may take a second longer but they work well.
@oldrogue42475 жыл бұрын
Did you give it some oil, first?
@mikehunt62994 жыл бұрын
Order your Magazines from Florida, I live in California and I am still able to order magazines over 10 rounds from other sites ,I just bout a 30 round Magazine what is the point of passing these STUPID regulations all they do is make it harder for the good guys to obtain a better fighting chance.
@mikehunt62994 жыл бұрын
@snoopy dubnation Look for sites that ship from Florida they dont give 2 fucks about sending wrongly prohibited magazines to any U.S State , Reason why is because of the GUN Sanction law in Florida if an investigation is launched they cant be touched I'm the only one who can take the heat. I'm not worried because I'm real good at hiding things if I need to.
@goodsir2551 Жыл бұрын
Works great for the CZ TS2 as well. 9m m
@Drockdeeznuts Жыл бұрын
Problem I can see running into is what about ammo that doesn’t organized in that tray? Winchester and most other ammo are just thrown into a box like candy.
@uchihakuma8848 Жыл бұрын
great demo sir!
@davidwaddell6507 жыл бұрын
big part is make sure you oil/grease the easy loader. Also, you should be pulling it back on your chest. Makes it so much easier.
@oldrogue42475 жыл бұрын
Gun oil, NOT grease!
@hunter5369 Жыл бұрын
Do this loader mess up the lips on the mags?
@pinkakagreen2 жыл бұрын
I need 10 of these
@Stellar0011005 жыл бұрын
I think ill stick with the Lula. More compact and handier with loose rounds.
@duMaurier15 Жыл бұрын
Do these work as easy on the IWI Masada magazines?
@Scaff424 жыл бұрын
The first 10 or so round were great but when it came the rest it wouldn't load all it would do is push the projectile into the shell I thought it might be the type of shells or projectile but not that didn't matter and the other thing is if you don't have a table or something to push down on the magazine comes out of the loader. I thought maybe it just needed to be used for a little while nope that didn't help so all I have to show for thing fine piece of craftsmanship (not) is some messed up rounds and some pinched fingers. And now I'm stuck with it because the business I purchased it from has a no return policy, I found that out after purchase.
@Sport-wg2tv Жыл бұрын
I tried one of these and it's didn't work at all the ammo didn't line up in the slide to the mag for 9mm from the apx
@turtletrade5 жыл бұрын
Works better with a drop of oil on the loader's feed ramp
@clems69893 жыл бұрын
I keep expecting to hear......." I'm Tom Bodet for motel 6 and We'll leave the light on for ya"
@jimmieburleigh95494 жыл бұрын
Line push guide with side of work table and push mag
@edwardstubbs3976 Жыл бұрын
Will this work for any type of magazine (9mm) that's not a Glock?
@TheSkittle19764 жыл бұрын
at least this video is more realistic on the pressure needed to push them in the mag. I got a 9mm and a 45 loader and they are both crap. They both broke at the angle slide inside. These should be made out of aluminum.
@jimsnider38522 жыл бұрын
Works GREAT!
@johnh52592 жыл бұрын
2:58 "I have a high-capacity magazine permit." Could you please elaborate on that? I'm sure a lot of people would like to know.
@kdog78302 жыл бұрын
He is a dealer so he can sell high capacity magazines to law enforcement
@edcicoria3 жыл бұрын
Does it only work on Glock mag double stack?
@dawnmiss11983 жыл бұрын
I just got mine today. Can you help me mine is jammed
@dende8907 ай бұрын
It's not a little bit tight, but it's super tight if you are old and have wrist or thumb arthritis; it's very difficult to disengage the magazine. And I OILED THE RECEIVER VERY GOOD, NOT MUCH HELP.
@whiskeytangofoxtrot51354 жыл бұрын
good demo but I won't try one, I buy a lot of bulk ammo would have to load it in tray first , and looks like it takes too much effort to push the plunger, probably going to damage mag lips if used frequently
@user-xl6xg3wi3z6 ай бұрын
Hi..do you have for 10 mm glock 20? ,wish the best for you..jorge
@user-xl6xg3wi3z5 ай бұрын
Could you answer me please?
@TheSuburban155 жыл бұрын
Don't always have a sturdy bench to push down on. I don't know that this would work for me.
@paulrejeansanscartier41882 жыл бұрын
It would be much more easier if you had lubed it before hand, and you should keep the bullets standing up with the primer at the bottom they go in much more easily, also you should never ram it in you will damage the inside of the fast loader.
@jalenbrown22517 жыл бұрын
Come on lenny you come up with anything
@Mr.Ludwig13867 жыл бұрын
With all that pressure you have to use to force the rounds in, wouldn't it wear on the mag itself. Sounds kinda harsh loading them in.
@GunCollector0077 жыл бұрын
Not for me but very interesting
@bryanfix8724 жыл бұрын
How does it work with B&T 9mm Mag
@stevenrichardson49285 жыл бұрын
Mag Lula Striplula or ETS CAM loader? Is each well made/durable?
@venomrogue13 жыл бұрын
Mine was great for about 50 reloads (17 rd S&W), now it won’t feed more than one cartridge at a time. Sorta defeats the purpose.
@ShogunAutoworks Жыл бұрын
I LOVE MINE
@jasonram93257 жыл бұрын
Harry and the Henderson's?
@jackthracian64786 жыл бұрын
I need it as a topic.
@herosupport16066 жыл бұрын
california are forced to use reduced capacity magazines everyone else gets to use standard magazines.
@daviddavis26583 жыл бұрын
bought one for my p89 and it works like shit. buyer be warned
@BigJKtm4 жыл бұрын
WOW, 49.99 on TheGlockStore.com but you can go right to the manufacturer and get it for the suggested retail of 29.99, way to milk it Lenny
@SteveKarolek4 жыл бұрын
$25.20 on Amazon...
@barryblack58165 жыл бұрын
That's a piece of crap it doesn't work on the Sig Glock or Beretta magazines you have to be a weightlifter to put that much pressure
@CHEECHMUN4 жыл бұрын
Oil helps
@donpearson95242 жыл бұрын
I bought one on ebay and couldn't get it to work right . It's in the trash now. I stick with the lula
@rideordie30334 жыл бұрын
Damn man why do you have to make fun of us Californians lol.
@antj2115 жыл бұрын
Looks cool but Also looks strenuous
@imdonenomas1129 Жыл бұрын
It looks like it's easier to load my 7.62x39 ammo with my ets
@jerroddooley3743 жыл бұрын
Yea, I wouldn't waste money on that shit. It'll damage the magazine, and probably not stack the rounds properly
@jorqlip7 жыл бұрын
How does it get past the feed lips
@killer26006 жыл бұрын
The rounds go down ahead of the lips and get slid back underneath the lips.
@glkshooter61683 жыл бұрын
Lol kinda rolls of my tongue except that time I fumbled it
@danfromthesouth53525 жыл бұрын
Hhmmmmm I’m now left wondering how well these will work on the factory 33rd mags
@oldrogue42475 жыл бұрын
They actually make a separate one for rifle mags.
@sf77084 жыл бұрын
Dan From the south, in a nutshell, almost impossible to load to capacity! Sent mine back same day...
@zilla69903 жыл бұрын
Less talky more loads for Christmas sakes
@anthonygiovannikarmawisera2187 жыл бұрын
Nah not for me. Too many moving parts and they break easy. I'll just stick with the loader i have.
@rickgoddard69252 жыл бұрын
I'll stick with my maglula
@APlife7643 жыл бұрын
Good vid just a little much talking😬
@maxwellthepig44193 жыл бұрын
Bought one. Tried it on Glock 22 15 round mag. Oiled the rail, the well and even a light coat on the mag itself. Never was able to get 10 at a time to work. Eventually tried one at a time to loosen it up. Then two at a time. Seemed better, but tying three jammed a round in the well each time. Also just doing one round when mag reached 11 rounds would also jam it in the well. Not satisfied at all. Maybe it is just me or bad luck, but your experience may be better. Thumbs down on this loader.
@Harley8313 жыл бұрын
Sounds a lot like user error😂
@maxwellthepig44193 жыл бұрын
@@Harley831 I wonder what part of my description sounds like user error?
@andrewhellsing73656 жыл бұрын
why didn't you just put it to your chest works better then on the table and a lot less stress also you barley was able to load it on table
@oldgreg40043 жыл бұрын
The et scam loader lore like
@duMaurier15 Жыл бұрын
is it that bad?
@rickberry49954 ай бұрын
I had one it sucked...
@texasbeast2393 жыл бұрын
Needs more 10mm. Seriously.
@rgon97243 жыл бұрын
Talk to much and slow to the point. You didn't have me at hello. You lost me at hello
@sf77084 жыл бұрын
Had one, didn’t like it, sent it back same day!
@mr.wabbit58744 жыл бұрын
you should have primed it with oil with a q-tip on the angle loader... bullets would have slept in way easier
@grandpakevin13 жыл бұрын
He is not using this correctly. It is really really much easier but needs to be done properly. Lenny you’re the man but not on this one! If you watch the manufacturers video (or some other reviews) you need to oil that thing some and then have the bullets facing up, not forward. Watch the Warrior Poet Society video on this.
@Knubinator Жыл бұрын
Why are you spending my money, man?
@brucewailes7744 Жыл бұрын
I see you charge $50 for this unit in your web store. It's available for $20 pretty much everywhere else. WTG, I guess, if you can get that kind of markup, but you won't get it from me.
@DonRoyal14 жыл бұрын
I will come back here when I want a so and so to talk to me about sliced bread
@monarchpixels Жыл бұрын
This loader sucks the rounds stick in the rail and don’t load easy.
@devandoe98334 жыл бұрын
It hurts because he’s doing it wrong 😅
@122Music13 жыл бұрын
Total crap. It forces casing THROUGH THE TOP CRIMP, ruining your magazines. It does not load front-down-and backwards into the mag. It forces cartridges into the mag. back and down through the arched inward top portion of a mag. Totally useless destructive tool. Just bought it. I hope I can exchange or get refunded. Terrible product.
@matthewmirzarafi3584 жыл бұрын
its garbage! u have to push it agents ur chest hard, after i used it in the range my chest was sore and i had alot of trouble with it!maglula is way better this is just a junk ,
@philwilliams832810 ай бұрын
Cumbersome, awkward and basically a piece of crap. I'll stick with my good 'ol Magula Uplula.
@CiclidosDePuertoRico6 жыл бұрын
California gun laws are so STUPID ... and im from PUERTO RICO where we must ask a judge just to carry ...