ATS also needs optimisation like ETS2. ETS2 1.50 is stable on FPS while ATS struggles to maintain 30 FPS on the same settings as ETS2.

Thank you Vutomy for keeping us upto date on what is happening. Many thanks.

I removed all the mods when I downloaded the update,didnt had any problems

SCS should to improve building interiors and reflections. Building interiors looks so bad. just a 2d photo.

When we turn on the headlights of our own vehicle, the frame rate drops by 35 FPS, which is an issue that needs improvement. When the headlights of other vehicles are on and our vehicle's headlights are off, the frame rate is 75 FPS. Compared to previous updates, there is an improvement, which is a good effort. However, there is still a drop of 35 FPS when the headlights are on. Generally, this was a game where I saw 70 FPS at 1080P with 200% scaling and max settings in the previous update. Now, when I turn off the headlights, I get between 60 and 70 FPS. At 300% scaling with max settings at 1080P, I see between 35 and 40 FPS. In my opinion, the game graphics deserve to be played with at least 300% scaling. However, at 300% scaling, when I turn on the headlights, I see 17 FPS due to the drop, which is very disappointing. This is because, with my current hardware, I can play games like World of Tanks and Forza Horizon 4-5 at full graphics settings in 1080P with at least 100 FPS. I didn't want to make a comparison, but with this hardware-AMD 5600x processor, 16GB 3600MHz RAM, GTX 1050ti graphics card, SSD-playing at 400% scaling, full settings, and 1080P resolution with headlights on at 45-60 FPS would be the real improvement.

we need dx12 asap we will get such a big fps boost

I think the old UK side is better than other places because it's full of highways and it helps I am not getting that much lag in it Love 💕 your videos❤❤🎉

i started watching you ever since your first video realeased! It was about fixing the mod compatibility. Now you upload so much content to keep us updated. Although tbh the end screens are a bit long, i love your channel!

I play with everything at maximum, this includes scaling at 400%, my average fps is 60, 50 but when I turn on the lights they immediately drop to 40, 45.

I went from High/Ultra settings to medium. Game runs smooth and i am not noticing any MAJOR differences, even won some FPS. The random lag(or FPS) spikes are terrible though....

me too on some of my mods I had the road completely in purple it was catastrophic it looks like I was at Barbie

I had 120+ fps before the 1.50 update. After the 1.50 came, after I turned on the light on my Scania truck, I had 30 fps. I really hope that it will be better later. Because I have an rtx 3060 ti and an i5 12600k processor.

where is rain drop on window truck, and E-Tech truck?

I didn't know that after update 1.50 the game often suddenly crashed. This happens when using mods or not using mods

Awesome video 👍😀

Hey Vutomi this video was cool

Its much better. Its running smooth and fast, looks great, more details, even on an internal hdd. If only I could get the right stick working so I dont have to use steam controls which are far too sensitive.

at 3:41 you mention Athens but the 3 first photos are at Piraeus not Athens

UK badly needs more roads and detail

What do people have... Intel iris graphics?

Nu sti cnd o sa apara tiruri now din ets 2 volvo Mercedes Benz si reno

When i was playing ETS2 1.50 version and i was deliverying but this happends i was driving Pärnu to Helsinki and some times it crashed

When my game lags, it shows an error and the game stops. Any idea to fix that?

What is your resolution when in game.... since you are on 3060ti.

When we will be able to play online again on 1.50

The whole game with the all versions is a full beta game which includes gb's of bugs

Yeah it’s causing issues to make pc’s run way too hot especially if it’s in low settings with a high end pc. Definitely need to fix the optimization or will see fireworks nationwide lol😂

For some reason all the license plates are black since the new update. Not only mine, but also AI plates.

I was playing ATS v1.50 it’s crash-lagging and freezing. I got over 200 mods people telling this my mods causing the game to crash and lagging. I opened the game and created a new profile after a few minutes the game crashed when I tried to open it back, I got this 👉 The game filesystem failed to initialize, aborting now. I watched videos on how to fix that go to Window Security do they verify the integrity file? It's still happening restart the PC it's happening every I try to open the game after a crash. When it’s finally open I go to my previous profile on level 15 and disable all of my mods the game keeps crashing. Updated my driver check for viruses nothing. Go to Steam settings download clear Steam cache and reinstall Steam nothing. I got a 3080 GPU CPU ryzen 7 Asus Tuf x570 motherboard 750 power supply 2 SSD 1TB and 2TB Window 11 32 GB Ram I don't use an Ethernet cable I'm gonna use one and change from HDMI to DP

The Scania rendering problem is exactly the problem that I have

mod problem lol work fine for me

Stranges you are complaining about micro stutters, I had in 1.49 a lot microstutters, and with the 1.50 update, is almost gone.

1.50 can't start 😞

i have no issues with theese things, the onyl issue for me is too dark interior

12th Gen intel(R) Core(TM) i5-12400f 32 ram memory RTX 3060 Play ultra on everything scale 300 and with traffic mod Cipus Run 40fps on the graphics card. Have no problems.

I've just deleted my profiles and created a new one and all pinky bugs are gone 😂😂😂😂 in both ets 2 and ats.

Plaque wy is so balck

Dont understand. 1.49 good, 1.50 random lags as hell.

After all this game still can't run properly SCS has to fix this update as soon as possible. We deserve better than this

After updating and making the graphic setting Low or Medium some polygon was not rendering and there physic was also gone. Lags and fps drops🥲