Eureka Airspeed One Troubleshooting and Maintenance

Рет қаралды 242,143

10 жыл бұрын

vacbin.com has Logan show how to maintain and troubleshoot the Eureka Airspeed One. The full review and more information can be found on the VacBin website.

Пікірлер: 102

@PimpD4Life 6 жыл бұрын

Logan......You are THE MAN... the suction on the top was jammed and the debris flew out, it's working like new. I wish I could like this vid a billion times.

@krystalbuhler9976 10 жыл бұрын

Thank you so much! Ive been having a lot of issues with my vacuum and almost tossed it and bought another. Then I saw this video. Turns out a sock was jammed in the tube for floors. Thank you so much! I never thought to look there!

@jakjak2460 4 жыл бұрын

Thank you for this video! I was growing frustrated with my vacum, but these simple checks from the video fixed my issues.

@UfoneGirl08 8 жыл бұрын

Do you know what to do if the vacuums doesn't turn on anymore? I was vacuuming and it just shut off and will not power on anymore. I checked the plug and the power button... It doesn't turn on...

@ultrahustle 8 жыл бұрын

great detail breakdown, this vac is pretty good, I've had it a few years. maintenance is crucial !

@joshlakes616 8 жыл бұрын

how do you change the belt in a eureka as2011?

@TheToethumbz 8 жыл бұрын

Thanks so much for this video. I have a similar model and this helped me find what was clogging our machine.

@qsp6062 5 жыл бұрын

Hi Logan, although the vacuum looks identical I've not found on the hose issue anything to put the vacuum on dawdle or seen any disk going around. What did happen when I put the canister back on the hose worked beautifully, as well as it does on the floor, which brings to mind I'm on tile floors so since you mentioned the right height adjustment I put mine on two from one just to see I'm playing around at present with it as it's new, on it's 3rd use, so your video is very helpful and appreciated.

@AshleyDashmo 6 жыл бұрын

Thanks for the help! Stair attachment working great again.

@mandyt1918 7 жыл бұрын

I absolutely love mine. probably one of the best vacuums I have ever used. Its lightweight and simple to switch from doing the floors to using the tools.

@qianadaltonb6374 3 жыл бұрын

I have another Eureka and although it's a different model, I was able to see that my small suction nozzle was severely clogged. I unscrewed it and was able to FULLY clean it out and it works brand new again.

@katiequixotic 8 жыл бұрын

Any tips for how to lock the internal filter back into place? We were shaking the dust out of the yellow part that extends down and the upper filter portion came loose. Thanks!

@Juwann22 8 жыл бұрын

this is exactly the video I needed to see!

@hazor777 6 жыл бұрын

IF the vacuum is blowing dust as it's sucking up MOST of the debris, make sure the soft filter pad is clean AND take some duct tape and seal the connection points (there's 2) where the bucket attatches to the body/frame of vacuum . I did this , and mine started working like a charm ..( it finally SUCKS !!!...instead of "it sucks" )

@sherrycurtis-smith2539 7 жыл бұрын

I am having a problem. How do you adjust the tension bar for the belt on a Eureka Airspeed AS1061

@PhilipLawsonArt 9 жыл бұрын

Nice job Logan, Very helpful !

@markvalentine5908 4 жыл бұрын

Thank you for the video - had the same problem a lot of these viewers did with the passageway on the floor mode. Entirely back up with pet hair, etc.

@markvalentine5908 4 жыл бұрын

^backed up

@MrFredrick678 7 жыл бұрын

I have one of these BRAND NEW and it's as loud as a jet engine when I turn it on. To the point where I can't use it, it hurts my ears and scares my neighbors! All the moving parts work fine and has great suction... so why is it so loud? I literally just put it together

@kathybolden5090 8 жыл бұрын

i put my handle on backwards, and I'm catching hell trying to take it off ,without breaking it. any suggestions on taking it off?

@anneboyer8437 7 жыл бұрын

I vacuumed up a soft toy! How can I get it out between the rollers?

@Jay-Kaizo 5 жыл бұрын

These vacuums are incredibly delicate. Putting it together brand new, I snapped a clip that hold the dust cup in. You can't just buy the clip either. Eureka sends you to a independent parts retailer online and you need to buy the entire setup which is like $40. For a part that you need to take off and dump out repeatedly, I would assume that it be made of something stronger than extremely thin plastic. That was all before I ever used it once. I bought a velcro strap to hold the dust cup in place and it somewhat works, but then after using the vacuum 5 times, it shuts off after 2 or 3 minutes of vacuuming. I'm not vacuuming up marbles or anything either. lol. Just the normal daily thing. Such a waste of money. Go with Hoover for a way better vacuum around the same price.

@Mahagoat 9 жыл бұрын

hi, my problem s that the vacuum wont unlock from the standing position-i cant pull the handle back at all. what can i do?

@jodiehammett948 6 жыл бұрын

Im not sure if i have my inner green filter in right inside the canister...please help!

@chobosamurai 6 жыл бұрын

Video helped me repair my vacuum thanks!

@jaxxknocker 7 жыл бұрын

What is the tool option for

@arianaprussak 6 жыл бұрын

Good tutorial. Thank you!

@riverjoystudios6597 8 жыл бұрын

Thanks Logan! Don't why I didn't think of the belt! I'm sure that's it!

@edithcazares2154 3 жыл бұрын

What kind of belt do they use?

@brad349miller 7 жыл бұрын

wouldn't turn on at all but i fixed it. this will damage your pedal. while plugged in i popped off the foot pedal which will break a tiny piece inside the button but then I pressed the button down inside with my finger several times and it came back to life.

@annettevanessa4697 7 жыл бұрын

how do you remove the handle

@ambarnavarro5048 7 жыл бұрын

i can feel suction and the brush is moving but it's not picking anything up :( this is a brand new vacuum only my 2nd time using it the first time it worked perfect but now it won't pick up anything

@Ca31_Buff 8 жыл бұрын

I have a eureka airspeed one model AS2013The suction dial to turn to floors and tools is hard to spin.I have looked in it and their is a lot of dust could that be why it is hard to move? I don't want to buy a new eureka vacuum

@MrLizgovea 5 жыл бұрын

How can replace the belt without taking to a shop?

@roselandpetals 3 жыл бұрын

Mine was doing fine until it all of a sudden got really loud and vibrates at the foot pedal. The brushes and suction work just fine so I'm not sure what happened. My guess is I'm going to have to open it up.

@vango1131 8 жыл бұрын

if u feel suction and the brush doesn't move? what then

@DailyLifeOfAzhlyn 9 жыл бұрын

You are so adorable and so helpful! Thank you! Found out I need to replace my belt!

@thefishstick 2 жыл бұрын

You da man! Helped me with a few things on my powerspeed

@brianwright3085 9 жыл бұрын

Replaced a broken belt and swapped the brush roller while I was at it. Still twice as loud and the same burning smell. Brushes still rolling and unit is cleaning though. Any thoughts?

@Vacbin 9 жыл бұрын

Kicker774 _ Sounds like a bad motor, give Eureka a call and see if they'll replace it.

@steffa1979 7 жыл бұрын

My Airspeed One is INSANELY LOUD. I changed the belt today (which had snapped) and although it now has suction, it is still just as loud. Any suggestions as to why this is?

@mayamichelle4163 7 жыл бұрын

Stephanie Santos same I've had other vacuums over time and this one is the loudest one I have ever had it's so bad that I rough sweep the carpet to avoid using it I was hoping for help too

@meowmachine9147 7 жыл бұрын

Stephanie Santos Mine is just like this. Loud suddenly but still picks up dirt. Anyone know why?

@shawnwhitehurst3544 9 жыл бұрын

I've used my air speed one 3 times and the last two it makes the loudest ear screaching sound I've ever heard. I'm not a happy camper because I've only used it 3 times.

@Vacbin 9 жыл бұрын

Shawn Whitehurst You just need a new belt.

@PHAME999 7 жыл бұрын

Shawn Whitehurst

@susankramer7807 7 жыл бұрын

very helpful video

@nicklelynn1735 9 жыл бұрын

I'm having a problem with my vacuum where it won't lean back and I don't know why.. what could be wrong and how do I fix it?

@DarienFRodriguezDirector 8 жыл бұрын

+Nicole Robinson The problem is with 2 Black tabs underneath the unit. They are jamming the ability for the handle release to allow the vacuum to lean back. Turn the unit upside down and examine the bottom just underneath/below the floor brush. Right around the wheel area if you look closely you will see 2 black tabs on hinges that rock back and forth. Those are blocking the unit from leaning back as the "MotorBall" section on the vacuum has to notched edges that stick out and catch these tabs. If the notches go too far past the rocking tabs, it will block the unit from leaning back. This happens when you hit the vacuum too hard against something or force the vacuum too hard to the upright position. My wife did this and it took me some time to figure this problem out. A long flat screwdriver can be used the pry the tabs back into place, or, you can pop them completely out, lean the vacuum back, then pop them back in again. Hope this helps!

@Pleaserewind 8 жыл бұрын

The real question is how do you take off the handle at the top? Trying to return mine and it will not detach for the life of me. It's too tall now ti fit in it's box lol.

@Ca31_Buff 8 жыл бұрын

+Adam Menist how do you take it part? I cant get mine I just like to take mine part sometimes and I cant get it

@emmanuelmartinez8493 9 жыл бұрын

This vacuum's belt broke the first day using it. Any idea if there's a quick fix without having to get a new belt?

@Vacbin 9 жыл бұрын

Emmanuel Martinez No, just buy a new belt.

@citysmall3427 8 жыл бұрын

+Emmanuel Martinez Ours broke the second time. I read a few other people saying the same thing. I say...this vacuum SUCKS (and not in the good way) :( Glad we didnt pay for it. It was a wedding present.

@mariaaguilar4836 10 жыл бұрын

I have a problem with my Airspeed One, and hopefully you can help me. Everytime I turn on the unit alot of dust blows out from the area where the canister and the tool/floor knob connect.

@Vacbin 10 жыл бұрын

Sounds like the seal is broken or missing. Check for a rubber seal where the canister and the body meet. If it's broken or missing either replace it with a generic, or call Eureka and see if they can sell you a replacement.

@jaimeplym8703 8 жыл бұрын

what about the red part (the inner filter inside the cup)? not one single video or website discusses how to clean that separate filter, yet mine is filthy. It's also causing blockage. Does it need to come out or can the whole thing be washed?

@brad349miller 7 жыл бұрын

just rinse it and dry it, common sense.

@kiarawilliams7716 9 жыл бұрын

Hi my vacuum will not come on at all. There is no power. I plug it in and press the switch and nothing happens....what could be wrong? Please help!

@Ca31_Buff 8 жыл бұрын

+Kiara Williams does the wall work?

@kiarawilliams7716 8 жыл бұрын

Yes it does...I just bought another one....threw the other out...

@brad349miller 7 жыл бұрын

wish I had the money to do that. help!!!!

@Ca31_Buff 7 жыл бұрын

Do what?

@brad349miller 7 жыл бұрын

fixed it anyway. while plugged in i popped off the foot button push which will break the pedal. but then I pressed the button down inside with my finger several times and it came back to life.

@georgesalcedo2735 8 жыл бұрын

I out the top part of the case back on, it won't twist correctly

@alkz3701 6 жыл бұрын

Decent cheap vacuum. Thanks for the vid, kid.

@brookemccready2816 4 жыл бұрын

Thank you so much!

@MyKeturah 7 жыл бұрын

about two lbs of hair, dirt, paper, fur and lint came out of my vacuum. thank you so much would have bought a new one for nothing...

@carriemethvin4679 9 жыл бұрын

Okay so what about if there's no suction at all but the brush still spins like crazy?

@Ca31_Buff 8 жыл бұрын

+Carrie Methvin check for clogs

@ihopmom 7 жыл бұрын

I have a eureka AS2000-AS2039 that wont turn on.

@Picantepantz 8 жыл бұрын

I can not get my filter back together after taking it apart to clean it .I am pulling my hair out..

@brad349miller 7 жыл бұрын

figure it out since then?

@denisearnold9704 8 жыл бұрын

There is no power going to the vacuum. I tuned it off to empty the canister, and then it would not work. What is wrong with it? How could it just stop working like that?

@brad349miller 7 жыл бұрын

same hmmmm

@subrelaxation3396 8 жыл бұрын

Hi, My vacuum would not power on all of sudden..please help!!!

@Ca31_Buff 8 жыл бұрын

+Sherese Mattis does the wall work?

@brad349miller 7 жыл бұрын

mine does. same problem

@Ca31_Buff 7 жыл бұрын

ok so get for a dirty filter because that can over heat the vacuum and maybe kill it If that is not the issue and wash it if you can but if that is not a help go to me channel and ill help p.s wait 24-48 hrs for it to dry the filter outside if not raining

@meyerjohannes 7 жыл бұрын

I stuck my finger in the attachment like you said, and it almost got tore right off :(

@legendaryambition408 7 жыл бұрын

my tool side has a very weak suction

@mattyKallday 7 жыл бұрын

make sure you turn it all the way onto tool it should kinda click into place or it could be blocked

@MyKeturah 7 жыл бұрын

Legendary Ambition me too

@jenniferaustin8623 5 жыл бұрын

He says to wash the top filter every month😳 I have to clean mine at least every other week

@felishadortch4732 7 жыл бұрын

I have this vacuum an the suction is very weak barely picks up anything

@MarySilva-wg7qi 7 жыл бұрын

no suction at allfrom the tools

@mansfieldtigers1 8 жыл бұрын

mine is not turning on

@brad349miller 7 жыл бұрын

mine either. 10 months after purchase I was using it just now and shut it off for a moment went back and nothing. nothing runs.

@kandyjane21 8 жыл бұрын

should have should how to change belt.

@overthemoon9941 5 жыл бұрын

Just callled the numnuts at eureka customer service asking how to clean out the filter SCREEN (clear mesh) in the large section that fits in the larger dust cup/canister. On fone almost 40 minutes..they know nothing!! ZEro...floor supervisor same.. And this video didn’t even mention the filter screen...geez..

@HilaryCerveny 7 жыл бұрын

I love you

@amandapalmer5242 9 жыл бұрын

Where do I put water in my vacuum

@FAROFRESH 8 жыл бұрын

+Amanda Palmer you're gonna wanna pour the water on to the end of the plug that goes into the wall socket and make sure that your wall socket gets at least 4ounces of water poured onto it and then go ahead and plug it in make sure that the vacuums power switch is turned on you're gonna want all that electricity flowing through the vacuum and through your hand into your body that will really do the trick. next you might want to consult a physician. you should also try a wet/dry vac or a shop vac if you're trying to suck up water.. another alternative would be mopping up the water.. you could also just try not putting water in your vacuum unless you enjoy being possibly electrocuted or just ruining your vacuums suction there is a good chance that a small amount of water being sucked into your vacuum won't hurt but putting water into your vacuum the question doesn't even make sense.

@Ca31_Buff 8 жыл бұрын

+Amanda Palmer WATER!?!?!?!?!

@mikemichael7622 8 жыл бұрын

Right in the event horizon. You can tell where this is with a few handy details: 1. notice light being bent and pulled into the abyss like aperture; 2. look for time and space being blended together like a nice tapioca pudding; And last but not least notice matter being compressed into a nearly infinitely dense mass! When you use these three handy dandy details you'll be sure to have found that wiley event horizon! Once located go ahead and proceed to the adding of water (or other water soluble liquids). Please note DO NOT ADD MORE THAN 978 TRILLION GALLONS! It's really easy to add a bit too much so remember to bring your universal measuring cup. Remember to have fun filling your vacuum with perfectly harmless water!

@Keeping-It-Real-55 8 жыл бұрын

I got this brand new on Black Friday 30-35 bucks I think. I turned it on, and noticed the brushes were not spinning. After removing the 4 screws on the top of the vacuum. I was able to pry the bottom cover off, and sure enough there was a brand new belt laying in there and it was broke. I'm returning this piece of shit. I'll spend 100-150 on something decent.

@hanksgarage_ 8 жыл бұрын

What did you end up buying? I'm sure you have found something by now but if not check out your local vac shop. 150 bones can go a long way on a badass used one like a sanitaire.