With weathering, knowing when to stop is a virtue.

Really nice build. I would be very happy to have this beauty sat on my shelf. Well done.

The best model kit I ever seen

Masterpiece. I am impressed

Fantastic work

Fantastic work. Congrats. 💪🏻💪🏻

Awesome build

J'adore super merci 👍 PS les effets de fumée sont magnifiques

Your channel has only just shown up to me and I'm pleasantly surprised. Nice job!

Preciosa pieza! 🤩muy buen trabajo!

This must be the most stunning Typhoon I've ever seen of any scale. Stunning work mate, the weathering and accentuation of the panel lines is perhaps my favourite part of the build. Wish the 1/48 kits marked the rivets on the wings as in this kit.

Awesome build and an excellent job on the weathering. It looks like the epoxy bolts came quite handy during painting and weathering. I'm really eager to see more of your work! Keep it coming! Cheers!

Great looking finish but do feel the weathering a bit over done. Typically typhoons are generally cleanish. Looks like it belongs in the USAF rather than the RAF Nonetheless…. Great finish and nice display piece 👍

I'm sure at one point, I thought I saw the MFD's flicker! Gorgeous piece of art

I've worked on Typhoon for a few years now, since 2004, during the type's introduction to RAF service. Just my tuppence worth. The highlighting of the panel lines and rivets is over emphasised, military aircraft are not as flush and airstreamed as you might imagine when you view them close up, the gaps are there but not as noticeable as on this model. The soot deposits from the APU are spot on though. I've loaded a few ALARM missiles to another platform, ALARM was intended to be incorporated to Typhoon but it was withdrawn from service before this happened. The national insignia on the LH side of the fin is incorrect, the (subdued) red should be ahead of the blue. The AMRAAM/ Meteor missiles (sorry, did not scroll back through the video to check which ones) could never be fitted to the rear stations only, as the aircraft systems would prevent entry to FRS and therefore takeoff due to mass imbalance. Flight Resident Software does not like imbalance! Lastly, it's an ejection seat, Martin Baker type 16, not an ejector seat, anyone using the term ejector seat should be strung up by their own gizzards IMHO.

Considering the limitations of the kit the result is astonishingly good. I am impressed by how little masking you do.... It's almost a cavalier approach to painting, regardless the finished aircraft is truly outstanding.

Imho too much weathered, because the Eurofighters have a very clean appearance due to its modern composite materials. I'm done with Trumpeter Kits, their models have usally any bugs and errors.

Love the stand idea👍🤩

Those two bubbles are all I would be looking at once I'd noticed them. You should have tried again IMHO... especially as it weas a commissioned build because you know the buyer is going to point them out every single time someone looks at it (or worse have them pointed out)... also you missed a glorious opportunity to add LED lights in the engine to make the exhaust glow...

Wow, amazed to see tube cement being used, I don't think I've used that for 40+ years

Amazing work 🥰

You are a brave man. I got scared off by this kit when I heard how much of a pain it really is. I opted for the Revell typhoon instead, with extras, of course. She turned out really nice, a little more weathered than normal it would appear. Really cool idea with the afterburners masking the screws.

fantastic!!!

good stuff! making me want to try a bigger scale :) also, they synthwave soundtrack is really good

Excellent. I was about to buy this kit but you’ve put me off as I could not match your phenomenal skills. Thank you for staring this. Take care and best wishes, Rob, UK

Lovely, very nicely done with what looks like a kit that wasn't the easiest to put together. - Was I the only one yelling at the screen about the port side tail flash?

Beautiful work.

Very original idea to use the exhaust gases as a support. Very nice model as well.

Hi buddy, only just come across your channel. You are one very talented modeller. Thanks for taking the time to build this and sharing with us . Stay safe buddy. Steve. P.s are you from Stoke-on-Trent at all ?

Bro weathered the fire exhaust 💀💀💀

Absolutely cracking build. You mentioned at the start this was a commission. How does one go about commissioning a model. I have a need for a French Naal F-8 Crusader if it could be of interest.

I had a flying spitfire 1/32 scale I used a rotating white coat hanger coming out of the back tail wheel area and fixed to a square piece of steel for a base when against a white background it's hard to see the wire

Top draw work mate

hi!! i have the revell one which i bought second hand and noticed the clear part was missing, i already asked the revell service team but the kit is discontinued, do you know if the cannopy also fits? and do you know if i can order this spare part from trumpeter? i already looked for the page but it apears it is not availabe.

Great build mate. love the afterburners.

Not really a modern plane man ....but jeezuz what a job !!!!! wish i had talent like yours !!!! ...beautiful !!!

Excelent Work! This model Will be a reference to other modelers in youtube for many years and in diferents scales, congratulations!

How much of that Mr. Color Barley Gray did you use? I am building my first 1/32 jet, and am hoping I have enough paint.

Awesome Build,Thumbs up ;-)

Mi piacerebbe saper fare quello che hai fatto tu bravo bravo non sono tanto bravo come te

Great job mate 👍🏼

👍👍😁😁🎈😀

Do they have 1/18th scale airplane model

Pilot from kit or aftermarket?

excelente kit

I’ve recently had a life changing injury and am finding myself so bored. What would you suggest to start on? Or anyone that reads this, please feel free to chirp in. Thanks. Awesome videos.

i wanted to know can i skip the varnish and just apply the dark dirt wash over the grey paint,or can i ask will the dirt wash still wipe away without the varnish? Richard

the tail fin flash on the port side is back to front

Nicely done from a new subscriber. I'm more of a Sci-Fi/Dinosaur modeller myself but I really enjoyed watching you put this one together. Makes me want to actually start some of the Mig/Sukhoi kits I have in the stash (knew I got them for something).

I thought for sure that there would be colored led lights put in the engines to shine through the clear rods as afterburners

Too many panel lines no? Maybe a coat of thin matt sky grey over the top?

A great build but with one error: the port side fin national marking is back to front. The red part faces forward on both sides of the fin.

Great build, not so keen on Grotbags' pop socks though 😂

Brave soul using that cement VMS or Tamyia extra thin all the way for me

Hello, nice model... you habe link to buy the for the silicone holder and the diameter? Greetz from germany

Silly question: despite the plane being depicted in flight, and a pilot in the 'pit, why did you opt to not paint the interior?

You did an amazing job with this kit. I'm actually just a little bit disappointed with the quality of the kit itself. Not sure that I would want to build this one.

Undetachable base? Sounds like a nightmare for transport. Tightening of the afterburner chamber (like 2 styrene rings, one at the beginning of the chamber and one at the end) to the size of acrylic rod would do the job.

I thought all of the Typhoon was made of composite material, particularly on the wings so there wouldn’t be any rivets.

Calling it a Eurofighter is like calling a Tornado a Panavia....

Dont like afterburners.

Your painting and everything are great. Only problem is you chose the wrong model. The revell one is better. Plus some enhanced paveway IV would have been great, Typhoon never carried Alarm. L Arsenal has the paveway IV .

Nice job but the weathering is a bit exaggerated. The fighters are maintained regularly, they don't get so dirty

sigh..that muzic

Nice job! You're right that engine ribbing is not present on the real thing, also it does not have any rivets on the top side, because it's one big chunk of composite. You have good skill, build 1/32, buy aftermarket parts... PLEASE ffs... ditch that shitty humbrol glue :D

El final del fuselaje no sigue la forma real del eurofigter. Es una metida de pata del fabricante trumpetermodels. Parece mentira que supervisen tan mal un proyecto. Da pena. Un 0, al fabricante de la maqueta.

Eurofighter Typhoon - stupid aircraft = stupid model

rubbish you never see one in that dirty state very very over done

Very poor job. Basic techinics needed to do the job not seen. Use the paintbrush as using crayons. Glue job very bad. The achrilyc rods idea could be nice if well done. That colors? Try to learn more before trying to teach