How to calibrate the Steering Angle Sensor on any BMW // ABS FIX

Рет қаралды 228,849

3 жыл бұрын

SMASH that LIKE button and subscribe!
CHECK OUT MY AMAZON STORE: www.amazon.com/shop/evangoyuk
Check out ECS Tuning for all your Euro part needs. Use my affiliate to help the channel: bit.ly/2JqszXb
How to setup INPA and NCSEXPERT: • The EASIEST Setup Guid...
Link to buy K+DCAN CABLE (used for coding): amzn.to/3aLaw9J
CARLY for Coding and Diagnostics: bit.ly/3c9uMiV
HELP SUPPORT THE CHANNEL: www.paypal.me/evangoyuk
HOW to setup BMW scan tool: • The EASIEST Setup Guid...
YT INSTAGRAM: / evangoyuk
***Using the links below will help out the channel ***
Link to buy BMW Sweatshirt: amzn.to/2yzdRsq
Link to 3in1 Shine Armor quick coat: LINK TO BUY SHINE ARMOR: shinearmor3062.grsm.io/evango...
Link to Thermostat: amzn.to/2wkMDof
Link to Expansion Tank: amzn.to/2XftE9O
Link to Fuel Pump: amzn.to/2Xha9xB
Link to Maf Sensor: amzn.to/2yJ4d6n
Link to CCV kit: amzn.to/3e0gsLP
Link to buy K+DCAN CABLE (used for coding): amzn.to/2WkPo1O
eManual Link: shrsl.com/1cw3h-11y0-aya4
#BMW #SAS #ABS This description contains affiliate links. If you buy a product through my custom link, I will earn a small commission at no extra cost to you. This video is for entertainment purposes only. Evan Goyuk assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video.

Пікірлер: 87

@robertfaulkner7152 2 ай бұрын

I have an e63 I went from lock to lock , then I shut ignition off and then I restarted it and my light went off. My steering wheel was straight ahead too. Thanks for the video

@groldanhj3651 Жыл бұрын

Thank you very much for the contribution. I recently bought a BMW E46 320d (2003) and it had the warning lights on. I tried with other versions of INPA without being able to recalibrate the sensor. Using the version video I rectified the steering angle sensor calibration. One note, if you buy the same cable with 4 positions, the position farthest to the right (under letters D-CAN) is the one that worked for me.

@roberthaas3341 8 ай бұрын

Thank you. This video is clear, concise, and assisted in solving my issues and getting up to speed with inpa quickly.

@DIY-jr1ls 3 жыл бұрын

E46 Bible ! Thanks for everything and greetings from Belgium !

@EvanGoyuk 3 жыл бұрын

Thank you for watching!

@karlovarskadashcam3855 3 жыл бұрын

It works, nice video!

@albertalvarez5901 2 жыл бұрын

Thanks for this great help

@robertocalzolari4568 2 жыл бұрын

Ciao evan, ottimo video, complimenti spiegazione dettagliata, ho eseguito la calibrazione angolo sterzata sulla mini cooper s r53, e risolto il problema della spia sul cruscotto. Ciao da italy

@mr89firebird 2 жыл бұрын

Yo! Thanks for the vid! Subbed!

@StreetRocketJoe 3 жыл бұрын

The lock to lock technique only requires going from lock to lock once. If you go lock to lock and it doesn't clear then you need to scan the car and relearn the steering angle sensor.

@no.limittsmussbuss4051 2 жыл бұрын

Thank you for your lesson

@andydale7754 Ай бұрын

Nice and thank you!

@no.limittsmussbuss4051 2 жыл бұрын

Thank you to tell us

@dalisobanda5575 Жыл бұрын

Ohhhh Thanks. it worked for me..

@curtisbrown9743 3 жыл бұрын

Great video,,,,.,. is that software still downloadable? will the autel ms906bt work?

@robertkenney6002 Жыл бұрын

Will a steering calibration be needed for an alignment on an e90 or do they just reset steering sensor?

@1618MyMusic 3 жыл бұрын

Idea for next video, how to repair or delete de SRS light from dash, even if it is a bypass or using INPA. Every e46 has it.

@11Xshadowolf 2 ай бұрын

Thankyou brother

@leveluplife8585 5 ай бұрын

Compensation Routines doesn't exist on the dsc57, same version of inpa as you. Is there another menu to do this calibration? Working on an E53 X5

@karubees Жыл бұрын

Hello sir. What if you have a 2013 750li xdrive and it has the steering light, park, ABS, Brake and check engine light on

@LIBRACO74 2 жыл бұрын

Was it the battery 🔋 why it didn't cut right off or can it be a battery that need to be replaced if it's still on

@bhiosanytama618 3 жыл бұрын

My e46 has the same dash light error but INPA said rotation rate sensor error..Please help me to solve this issue for the best option before I replace from junkyard parts..thanks

@danieldacey8757 2 жыл бұрын

My 2000 323i doesn't have a shift + f4 option, what should I do?

@alexcohcoaching 7 ай бұрын

Is there a way to do this for E63 650i with active steering?

@smgees Жыл бұрын

Why on my inpa don't have F4 for steering wheel calibration? It's just same version like yours

@fatihayar365 3 жыл бұрын

hello when I leave my bmw steering wheel is going to the right, we could not solve what we have done .. does it cause a bad angle sensor?

@cristibradu3900 Жыл бұрын

Do You know If it works on FXX series?

@evelynedwin2472 3 жыл бұрын

@Evan Goyuk, thanks for sharing this HOW-TO video, would this work on the R56 (MINI Cooper S) 2nd gen?

@EvanGoyuk 3 жыл бұрын

Yes it should

@evelynedwin2472 3 жыл бұрын

Do you know what option from the main menu of the INPA interface I should select for the R56? All the options I see are BMW specific.

@bennymoctezuma4769 3 жыл бұрын

@@EvanGoyuk 99p00

@socksonfeet8125 7 ай бұрын

What will Inpa say if the sensor is bad?

@Alientraveler003 Жыл бұрын

So ,, can’t be done without comp, scantool ?

@chrisperrigo6731 8 ай бұрын

What is the program you use on your computer

@pelletshoter 23 күн бұрын

If i have offset Sterling angle -5,14 and in option inpa i cant choice F1 have only F2 and F3 option how calibrate this ?

@richardtomasko61 Жыл бұрын

I have a 2003 Z4 30i Random complete loss of elect asst. After parking 10 minutes Left over night power returns & red steering wheel indicator is back off Yellow Check Engine warning is always on ??

@billymarks5053 2 жыл бұрын

Thanks for these Video's! I tried using INPA to sort this issue on an E82 125i but get the error message "calibration steering angle only with steering wheel balancer" I also tried with tool32 and get the error IFH-0010: DATATRANSMISSION TO CONTROLUNIT DISTURBED. I'm beginning to suspect that something has not installed properly! I've changed the USB port to COM1 and changed the latency to 1. A bit stuck now!

@olleplays1169 8 ай бұрын

did you solve this?

@billymarks5053 8 ай бұрын

I wonder if the terminals 7-8 weren’t bridged because in the end I used another diagnostics machine and it worked straight away

@lo90zstuybrooklyn11 2 ай бұрын

Does the car have to be park or drive

@Kraxt0n Жыл бұрын

Mine only opens for Dsc abs not mk60. 2001 330ci (08/00) tried armen from E46 owners he's not been able to get me anywhere with SAS recal help!

@shaunariner 2 жыл бұрын

Mine doesn't have shift f4 as a option, any suggestions? Thanks

@DecYpheRv2 Жыл бұрын

Any updates mine is the same way

@markhill1353 3 жыл бұрын

Can you do this on Protool without inpa thx

@EvanGoyuk 3 жыл бұрын

Yes but I don’t think Protool supports this feature for the e46

@BeemerIsTheShit 3 жыл бұрын

Just did it but the the lights didn’t go out, so reversing out I did the full right and then going forward I did the full left turn and then started driving, the lights went out when I put it in second gear, no need for INPA.

@dennybrennan7832 Жыл бұрын

What sequence did you use?

@BeemerIsTheShit Жыл бұрын

@@dennybrennan7832 it was 2 years ago, time flies and so does my memory 🤓

@drexellake4051 3 жыл бұрын

How do you know which ABS module to select in INPA? Or will it be the only one listed?

@OliverGottberg 2 жыл бұрын

did you ever figure this out?

@Stag2997 Жыл бұрын

@@OliverGottberg It's written on the module itself. Otherwise, try selecting the version on INPA. They'll either work or they won't

@OliverGottberg Жыл бұрын

@@Stag2997 thank you for telling, turned out to be the yaw rate sensor (aka sensorcluster) in my case if thats why you’re here

@BmwMe-uh9sy 3 жыл бұрын

smh whenever i try clicking on steering sensor it never connects

@estranged85 3 жыл бұрын

Can this lights pop up if the steering wheel was removed and then mounted on again not 100% straight and aligned with the wheels?

@TheRomanoLV 2 жыл бұрын

Dude that is a perfect question because I'm starting to think that's what happened to me, did you ever find out?

@karembapayet2263 Жыл бұрын

UP??

@syms85 3 жыл бұрын

hi my INPA doesn't show F1 option? its has the other but not this one? any ideas?

@togrik 11 күн бұрын

Did you find this out? I also don’t have f1

@stevehunt3847 2 ай бұрын

I have. A yellow ,A symbol with a arrow on my dash board what could that be

@maximrabah2169 10 ай бұрын

PLEASE HELP OR ADVISE : I have problem with my e46 325i /2001 1-Battery light is on 2-transmission faulty light is on 3- I hear a bang when switching from reverse to drive When I start the car and see this sign faulty transmission , the car can drive on reverse and other gears except for first gear. If I start the car and sign does not show on dashboard, the car only drives on first gear 35 Km speed max. Took it to many mechanics and nobody could fix it. First guy said he fixed alternator and reprogrammed ECM , The second told me to check and change Positon switch which I did today and still problem not fixed .Now they are saying its the alternator which the first guy fixed. I checked the battery its giving 12.4 V and when car started and I hit Benzin pedal it goes up to 13.9-14 Volt .

@kota4878 3 ай бұрын

I think you may need a new transmission bro, also perfect excuse to manual swap, if it’s not already! Cheers

@cubanlink754 3 жыл бұрын

Hello how can I download all inpa into my Mac from a website I have a cd and the d plug but I can’t get it to download software so frustrating

@EvanGoyuk 3 жыл бұрын

See my video on how to install Inpa

@patrickbyrne4975 2 жыл бұрын

you will need to run parallels or a VM inpa needs windows

@EvanGoyuk 2 жыл бұрын

Yes

@coolandmellow 3 ай бұрын

Evan can you tell me where we get your software from and how did you get it to work on a MacBook. I also purchased the CARLY scanner and software ,can it be coded with that?

@andreamitchell4758 3 жыл бұрын

the trunk release on my e46 coup is not working , it works fine from the FOB but the button under the dash does nothing now, anyone have any ideas? i am thinking maybe a fuse or i did something when i was coding?

@EvanGoyuk 3 жыл бұрын

Check both coding options and fuses

@000darkorbit000 3 жыл бұрын

how does your inpa work with windows 10???

@EvanGoyuk 3 жыл бұрын

Yes!

@000darkorbit000 3 жыл бұрын

@@EvanGoyuk I just found your tutorial, I will download it now :D wish me luck haha

@kouroshtashvishi5031 3 жыл бұрын

Would impa work on a Mac?

@EvanGoyuk 3 жыл бұрын

You will need bootcamp or VMware to install windows on your Mac

@kouroshtashvishi5031 3 жыл бұрын

Evan Goyuk ah great man thanks

@diljoe9678 3 жыл бұрын

@@kouroshtashvishi5031 you can use an app called parallels if you don't want to partition your storage to windows (which you have to do with bootcamp) either on the hard drive or a flash drive. I recommend parallels since you probably wont be using it that often and I'm guessing you don't want to give up storage on your mac

@diljoe9678 3 жыл бұрын

same thing as VMware lol

@kouroshtashvishi5031 3 жыл бұрын

Ryan L you are 100% correct. Since then I have not installed windows just because of how much space it takes up. Thank you very much for telling me this app. I will be downloading it today thanks man

@mariodalmatian6441 Жыл бұрын

90% its bad HSR module which new cost 1500 euros. So try to find used one and see that numbers 679.....are the same and you dont need coding. Used modules are around 300 euros. That is among most expencive modules in bmw.

@noxlight5564 23 күн бұрын

What if my steering angle is 32000 degrees off 💀

@james_steven9182 2 жыл бұрын

So just go on the net and do it

@MartinLaGrange-bv8sc 15 күн бұрын

Jy prt net kak. Vokkof

@georgehelton3659 3 жыл бұрын

WTF???? That was some mumbo jumbo B.S. sorry to be real with you but it didnt do anything but waste my time

@EvanGoyuk 3 жыл бұрын

No I show how to reset the steering angle sensor

@georgehelton3659 3 жыл бұрын

With a big badass computer. Come on now how many of us have those. The turn of the wheel is what you said. You should make sure these "little tricks" are gonna work before you show us.

@johnthomasmoulton8934 2 жыл бұрын

@@georgehelton3659 I'm grateful for the video. A computer is just another tool, I can't fault a person for owning a tool that I have yet to buy.

@TheRomanoLV 2 жыл бұрын

@@georgehelton3659 Big bad ass computer? Man what are you talking about, an average person has a laptop at home, all you have to do is to buy the cable on ebay for 10$ and you're set. Otherwise go to the dealer and get willingfully ripped off smh

@disturbator Жыл бұрын

salt is strong in this one....