Every Car Person NEEDS a set of these! | Quickjack 5000TLX Portable Car Lift

Рет қаралды 21,448

5 ай бұрын

GOODBYE Jack Stands! In today's video, we setup my new QuickJack 5000TLX Portable Car Lift! We unbox the Quickjack setup, bleed the system, and I give you my genuine first impressions. As a car guy, i've ALWAYS wanted a car lift but I didn't have the room. So the Quickjack is the perfect tool to get the benefits of a car lift, but without losing space. Enjoy!
First off, I want to thank QuickJack and Bendpak for sending this unit out for me to review and use on the channel! Like many of you watching this, I wasn't sure if the quickjack was right for me or worth the money. After 30 seconds of using it, I can guarantee you it is. While I plan on giving you a long term review of the Quickjack in the future, my first impressions are amazing. In the video, I explain how the quickjack system works and briefly cover how to set it up.
My main goal of these video was to bring you along for quickjacks experience as a car guy. Things like, how much working room do we have? Which is the right model to buy? Are they actually safe? etc. Needless to say, I was more than impressed. Once you spend the time to set them up, you quickly realize how safe, sturdy, and handy these things are. The height is hard to perceive on camera, but there is SO much room for activities.
If you have any questions about the setup, drop me a comment and I'll do my best to answer them! In the meantime, I can't wait to work on the cars with these!
Check out QuickJack HERE: www.quickjack.com/
Thanks for watching!
-ALLDAYANTHONY

Пікірлер: 98

@jeffc6832 5 ай бұрын

The procurement and first usage of a lift is definitely a momentous day in every car guy's life. I saved up for one for YEARS and I was so thankful to finally make it happen. After years of pulling engines and swapping transmissions working with limited clearance under sketchy jack stands...I still get giddy every time I use mine. I get about 42" of lift out of mine, so I'm not able to walk under it or anything...but it's killer for brake, suspension and detailing work while rolling around on a Vyper chair.

@ALLDAYANTHONY 5 ай бұрын

It was a great day! Definitely game changing in comparison to jack stands. So pumped to use these for more projects

@bystolics 5 ай бұрын

I purchased my set of QuickJacks on Black Friday of '22. Definitely paid for themselves already throughout '23 with all the car modifications, oil changes, and brake jobs! Absolutely love 'em! Enjoy, ADA!!

@zackblack1184 5 ай бұрын

I did the exact same thing so I could change the oil on my lowered Civic SI. They’re freaking great!

@1991NOS 5 ай бұрын

I naturally feel like I would need to place a few jack stands just as back up.

@Mr.SparkleOG 5 ай бұрын

Man, ive wanted a set of quickjacks for years!! However because of the times and the fact that my children come first I havent been able to afford them. Hopefully one day I can make that dream come true! Congrats Anthony!! Hope that you enjoy the heck out of them!!

@ALLDAYANTHONY 5 ай бұрын

Yep children first, toys second. I hope you can get a set someday!

@Buckyvw 5 ай бұрын

Welcome to the quickjacks family. Glad you enjoy them and looking forward to future content.

@tomchinigo5014 5 ай бұрын

Those are freaking amazing !! Congrats Anthony and yes every car guy needs them.

@ALLDAYANTHONY 5 ай бұрын

Thanks man!!

@Fransitch 5 ай бұрын

I’ve been watching you for so long. You just popped up on my feed. Sadly my red 98 ek coupe got stolen 3 years ago. You even made me get my Yonaka cat back. Waited 6 months for it from Japan. Only for the car to get stolen a month later. Watching you is nostalgic. Have a good day bro

@egeg-nr4qs Ай бұрын

Anthony, a word of warning about storing your car off the ground. Because suspension is assembled & torqued with the wheels on the ground, all the rubber bushings will be twisted when the car is off the ground. Long term storage in this position will damage them. It is possible to loosen all the bolts that go through the center of rubber bushings to relieve the twist. You will then have to re-tighten & torque all the bolts once the car is back on the ground. The civic however has 4 bushing in the rear that cannot be un-twisted like this. The large trailing arm bushings, and the inner rear upper-arm bushings. They are dog-bone style, and there is nothing you can do to help them.

@smlee6290 5 ай бұрын

Love the QuikJack setup. Brother bought his set from Costco under a discount as it was the last set left. It's been a godsend for us when doing car maintenance in the garage. My EJ8 and EM1 has seen a good amount of time on our set too. Added additional blocks for continued support. You'll love it bud.

@ALLDAYANTHONY 5 ай бұрын

Costco seems to have the best deals on them for sure

@josephpizzi7505 5 ай бұрын

That is one sweet setup 👍👍

@kadenchadd9484 5 ай бұрын

Love the vids, hope to see driving around in town sometime

@ALLDAYANTHONY 5 ай бұрын

Maybe one day!

@SamZombiXBL Ай бұрын

I need this!

@connorquerin 5 ай бұрын

Hey man! Thank you for being consistent with the series, it has helped a ton. Quick question for you. How are your Corbeau's on road trips? I have the exact model of Civic as you, and I'm at the point where I'm debating what seats I'm putting in it. I'm not making my vehicle a track car, just a good daily and road trip car. For reference, I'm 6'2" and a little lighter than you.

@SnubBarracuda 5 ай бұрын

Dang, bro! How does it feel? You made it! When you are getting free Quikjacks sent to you then you know you are doing stuff. Super happy for you. :) I have wanted some of those forever. Great to know those will fit the RSX too.

@ALLDAYANTHONY 5 ай бұрын

Haha it feels great! Still have lots to work towards but I am very grateful

@ricardob9676 5 ай бұрын

Congrats Anthony. Make sure to check the air pressure on the air cylinders everytime before you use it. One time I was lowering my wife's truck from the highest setting after doing her brakes. The Jack's started lower at different speeds and the car started to tip and kicked out the jacks and fell. Luckily it had the wheels on and didn't cause any damage. I checked everything and the only thing off was the air pressure was low on one side, now I check everytime and haven't had any issues since

@ALLDAYANTHONY 5 ай бұрын

Good thing to note!

@samvanhoogen 5 ай бұрын

Easily buying this next!!!

@ALLDAYANTHONY 5 ай бұрын

You’ll love them

@user-nc4yd3ct3f 5 ай бұрын

Love the videos Anthony what camera set do you use.?

@HoodieGlaze 5 ай бұрын

Been a minute since I've been here but helloooo lookin forward to seeing this😂

@ALLDAYANTHONY 5 ай бұрын

Thanks for watching dude

@8RaymondNguyen8 5 ай бұрын

Mannn!!! That civic looks fire!

@ALLDAYANTHONY 5 ай бұрын

It’s absolutely filthy lol

@CPurdiePlays 5 ай бұрын

I'd give my left testicle for a set of these. Haha, all joking aside (or am I?) it's awesome that you have these now. Can't wait to see what the future brings for you and what you do to your cars while having these.

@ALLDAYANTHONY 5 ай бұрын

Hahahaha! They really are game changing for getting work done

@cirasarc4413 5 ай бұрын

best tool I ever purchased.

@ALLDAYANTHONY 5 ай бұрын

Glad you love them!

@BBHemisnJets 4 ай бұрын

Anthony! Great Vid thxs..... So →My 2 lifts will not come down (with no weight on them) on initial setup. What could that be ??? A serious problem? Any Ideas?

@Crooklyn_k 5 ай бұрын

Just checked out there website I was expecting 5k and up to be honest. I was very surprised how affordable this is 😮

@mybrainmeatshurt 5 ай бұрын

I've had a car on mine for months at a time. It might put a hurting on the rubber pads though. When I got mine in '17, the instructions said ATF or ISO-32 hydraulic. I went with the hydraulic fluid because I could buy it by the gallon. It still goes up and down like it should.

@ALLDAYANTHONY 5 ай бұрын

That’s great to hear!!

@user-bf1mi6sw2m 4 ай бұрын

We missed the Honda, do a build series, stealth audio😂❤

@TL-ds8ux Ай бұрын

What is the wheel spread of the Civic as it pertains to the QuickJack measurements? I am trying to see if my car, BMW i3, can fit the TLX underneath. I measured 78-79" and I know that the frame length in the description is 76". I would get the TL if it were just that car but I want to use it on our X5 which has a wheel spread of 90". It is very encouraging the TLX fits so well on a Civic and the i3 isn't much different from what I can tell but I don't have one to measure to compare.

@mycatsballs8195 5 ай бұрын

I would never replace jack stands and jacks I would still use them as a secondary setup just in case those fail

@ALLDAYANTHONY 5 ай бұрын

You can always slide a stand or two underneath if needed

@tonybrunetti 5 ай бұрын

I also love my quick jacks had them for over 5 years now, the only issue I have is the the air cylinder leaks air and have to add air in it everytime I use it. I tried called quickjack but they would not replace it because it was over a year and warranty expired. Still works great but annoyed about it.

@ALLDAYANTHONY 5 ай бұрын

Good call I’ll have to check that from time to time

@jvh22a 5 ай бұрын

Who do i need to talk to so i can a set sent to me! Looks awesome. Im debating between 7000tl vs mid rise scissor lift from startus. Its about 3100 shipped vs qj about 1800.

@tl7338 5 ай бұрын

Finally!

@justinguarino201 5 ай бұрын

I was looking at these, but then saw the price, and couldn’t justify 1500-2k for something that raises the car up maybe a foot, foot and a half. When there are full sized lifts that are around the price range (of course on a bit of the cheaper end, but still).

@cirasarc4413 5 ай бұрын

you get 2ft of ground cleaeance. these are good if you dont have room for a full sized lift or need to work in your driveway. I recall three is also a 12VDC version that is truly "portable".

@ALLDAYANTHONY 5 ай бұрын

It’s all about space and what’s realistic. I wish I had enough room for a lift. These are a great alternative that can be stored away easily

@justinguarino201 5 ай бұрын

@@ALLDAYANTHONY True true

@619.DRIVER 5 ай бұрын

Label me crazy but I would still use 6 ton Daytona jack stands with this system. Not sure I’d feel great being underneath this quick jack alone. Pretty cool for changing tires or doing brakes tho.

@ALLDAYANTHONY 5 ай бұрын

I feel safer under these than I do jackstands to be honest

@MoparGuy1625 5 ай бұрын

I still place jack stands under the QJ just in case. Can never be too safe.

@MannyRodriguez555 5 ай бұрын

I bought a pair of these in 2019 for $700 at Costco best money spent till I upgraded to a maxjax lift

@bradrhoades102840 2 ай бұрын

ive thought about getting a set but my garage floor isnt as perfectly level as yours. i have a small slope to a drain in the center. not sure how level the floor needs to be in order to safely operate underneath the car.

@ALLDAYANTHONY 2 ай бұрын

I think close to level is good enough

@pidipamatz5221 5 ай бұрын

do you know anybody with a silver 2000 front end

@kevinvillalobos2123 5 ай бұрын

Dang no coupon code? Love their stuff

@ALLDAYANTHONY 5 ай бұрын

No unfortunately I don’t have one, but I would check Costco. They usually have great deals on them

@menswearhous 4 ай бұрын

are you able to remove the quick connects after using the sealant?

@ALLDAYANTHONY 2 ай бұрын

I haven’t tried but I’m sure you can

@PennyPower3 5 ай бұрын

So that means, that the 5000TLX will fit for the hatchbacks as well, right?

@ALLDAYANTHONY 5 ай бұрын

Correct

@kramer7026 5 ай бұрын

What tint percent do you have on the civic?

@ALLDAYANTHONY 5 ай бұрын

I think it’s 18

@diegorangel3647 5 ай бұрын

Ah! Now you can install the skunk2 intake manifold on the civic! 👁️👄👁️

@ALLDAYANTHONY 5 ай бұрын

Hahaha yes!

@diegorangel3647 5 ай бұрын

@@ALLDAYANTHONY I’ve only been bugging about it forever now because I have one and I failed miserably when I tried installing it on my civic 💀 really hoping you have a successful install!!

@EJayNine 5 ай бұрын

Yeah I also need a giant air compressor and a massive house with a 2 car garage too.

@Sherukka 5 ай бұрын

Anthony is never speechless! Ask his wife what he goes on about when sleeping! 😊

@ALLDAYANTHONY 5 ай бұрын

lol

@timmerk 3 ай бұрын

Just a heads up, you have them oriented the wrong way. They should be turned 180 degrees for cars with engines in the front (page 40 in manual.)

@ALLDAYANTHONY 2 ай бұрын

The civic is light enough I didn’t think it mattered, but you have a good point!

@anonymous..- 2 ай бұрын

Got rid of mine after 6 months. Motor was faulty and tech support gave me delay after delay and stalled my projects. I got a drive over mid rise scissor that’s built like a tank and just works. All of the QJ accessories are overpriced and puts you almost to the cost of a mid rise scissor lift.

@ALLDAYANTHONY 2 ай бұрын

Interesting! All my communication with them has been awesome!

@CENSOREDFORSPEAKINGTRUTHS4380 5 ай бұрын

I really don’t know if I would trust these lifts,they are a great idea don’t get me wrong but I think I’d trust my 10 ton heavy duty truck chassis stands more than I would these lifts.

@619.DRIVER 5 ай бұрын

My thoughts exactly. Honestly I’d have no problem changing wheels or a tire but I wouldn’t be under that car.

@ALLDAYANTHONY 5 ай бұрын

Once you see them and use them in person you have a better understanding on how they work. I felt the same way back in the day. These things are solid

@abrahamfabela8457 5 ай бұрын

I just saw this on fb market today! Didnt last very long and Now its sold 🤦‍♂️

@ALLDAYANTHONY 5 ай бұрын

Dang!

@chasingxmidnight 5 ай бұрын

"here in my garage"

@noto3402 5 ай бұрын

Who else was just admiring the civic for 20 minutes ? 🙋🏽‍♂️

@hunterhenryk 5 ай бұрын

A lot of hydraulic cables lying around to be rolling a creeper through there.

@andyrcampbell 22 күн бұрын

dont throw out your jack stands - you still need to use them

@SlinkyTHAshooter 5 ай бұрын

Idk man… they’re a little pricey for only 22” of lift.… you can score a brand new lift for the same price… :/ ugh I’m conflicted

@ALLDAYANTHONY 5 ай бұрын

Do you have room for a full size lift? I don’t

@MoparGuy1625 5 ай бұрын

I have QJ. Wish I went with a scissor lift though. Love the QJ but want some that could go higher

@njrenkable 3 ай бұрын

Yeah, you must be on the locks or have jack stands. One failed fitting or hose and you'd be done.

@anthonyedwards7 5 ай бұрын

wheres the discount code my guy :D

@ALLDAYANTHONY 5 ай бұрын

I should probably ask them for one lol

@anthonyedwards7 5 ай бұрын

@@ALLDAYANTHONY I wanna get one for the isf

@joannabryant778 4 ай бұрын

'promosm' 🤘

@NOAHCASAS 5 ай бұрын

WAS THAT SUPPOSE TO BE THE JOKE OF THE VIDEO @6:57 OF "THAT'S WHAT SHE SAID" ?? KIN OF JOKE LMFMAO PLUS YOU LUCKY YOU DIDN'T HAVE THE CHOICE OF FRONT BACK SIDE TO SIDE IF NOT THAT THUMB BE NOTORIOUS AT THE LOWRIDER SHOW TO THINK ALL THE THING'S YOU GONNA BE ABLE TO DO NOW BREAKS, SUSPENSION, UNDER CARRY WORK ETC.... THE AUTO DETAIL POLISH BUFFING SHOOT EVEN P.D.R. WORK WOULD CHANGE THE GAME AND THAT COMFORTABLE CHAIR GAME OVER THAT'S AMAZING CONGRATULATIONS ANTHONY ✌🏼OUT

@ALLDAYANTHONY 5 ай бұрын

Yeah dude!! This is going to help with many projects!!