Getting to use mine on Christmas Day, so far you’re the only one who’s uploading proper tutorials, thank you

6:48 QUANTIZE: With tracks for which LOOP SYNC (p. 3) is “ON,” under any of the conditions listed below, your timing will be corrected (Loop Quantize) based on the tempo and time signature of the rhythm, even if the timing at which you press a button is slightly inaccurate. If the rhythm is on If there is an already-recorded track whose LOOP SYNC is turned on If the MIDI Sync is on * The QUANTIZE setting applies only during recording. It is ignored during overdubbing or playback. * When you stop recording, it is quantized to match the measure length of the previously-recorded track (LOOP SYNC: ON) or rhythm. QUANTIZE: OFF: Recording begins the instant you perform the operation. When you stop recording, it is quantized to match the measure. QUANTIZE: MEASURE: Quantize to the measure start location for recording.

7:46 LOOP LENGTH Specifies the length to which LOOP SYNC (p. 3) aligns the beginnings of the material for loop sync. AUTO: The length of the first-recorded phrase will be the LOOP LENGTH. 1-25362: Manually specifies the number of measures that will be looped.

Because of your videos I was able to dive right in. Thank you! I have dreamed of a machine like this for 45 years! Excellent video and explanations.

I wanted to say thank you very much you are the only reason I know how to save a project in the new MK2 and you are very very very helpful man so keep doing what you're doing it's a blessing you're very very kind thank you so much

I started looping about a month ago. Though I knew most bits of the video, I still learned quite a lot. Thanks, Jimmy!

10:29 PHONES OUT: These parameters specify the track to output from the PHONES jack. * When STEREO LINK (p. 11) is “ON,” MAIN, SUB 1 and SUB 2 are shown. MAIN-L, R: The track set in “MAIN-L, R” (p. 11) of ROUTING/TRACK is output. SUB1-L, R: The track set in “SUB1-L, R” of ROUTING/TRACK is output. SUB2-L, R: The track set in “SUB2-L, R” of ROUTING/TRACK is output. INDIVIDUAL: The track set in “PHONES” of ROUTING/TRACK is output. PHONES MONITOR: * This is shown when the SW parameter of ROUTING/PHONES OUT is set to “INDIVIDUAL". OFF, ON: When this is set to “ON,” the track’s sound always plays back through the PHONES jack, regardless of the track slider position.

🎉🎉🎉 so many Settings that I was wishing for in the mk1. Just unpacked the mk2 and am super psyched. Thanks for the video

I'm about to watch all these tutorials 100x haha thank you from a new looper!

Thank you so much for your videos on the mkii, I really appreciate and they helped me use it for a show last week with only 2 days to practice and figure it out, can’t thank you enough man it was a great show with the mkii!!

wooo the undo redo with marker is crazyyyy new possibilities!

Thank you so much for this tutorials man, really helpful

Thanks DgyMie ! Really appreciate this video

Thank you DgyMie, I am still waiting for my MKII to arrive on May 2022, I cant wait to browse your tutorial while testing it!I am beginner with never touch on any beatbox looping device

Thanks for the video! Quantization is the looper trying to time your notes/beats on the measures. So when you are slightly off on your rhythm, the quantize function help you nudge everything right on the measure.

15:10 MEMORY EXT: Specify the extent in which memories can be switched (lower limit: MIN / upper limit: MAX). MIN. 01-99 MAX. 01-99 Guess you can kind of set Memories to ReadOnly from how the ParameterGuide is phrasing it that is at least my guess ( :

Thanks, some of the stuff I wasn't sure about so that cleared it! Cheers!

Thank you! This shows that, although they look similar, the mk2 is quite a different machine to the mk1

❤❤❤ great explanation man good job

This was so helpful! Thanks for your effort. 💚💚💚

I was going nuts, because all tutorials I found dealt with the rc-505. It was so difficult to translate the settings on the mkII. Thx for helping me out.

lol literally the one thing I needed you slid right past. I need to figure out controlling with an FS - 6 on this.

7:54 SYNC ADJUST : When SPEED CHANGE is set to “IMMEDIATE,” this sets the conditions for synchronizing the start of the tracks. MEASURE: The starting points of the tracks are synchronized if they are out of alignment by one measure or less. BEAT: The starting points of the tracks are synchronized if they are out of alignment by one beat or less.

Merci monsieur DgyMie !

Thanks you Thank You! I was trying to get a track to play longer than 1 measure despite setting it longer. Recording a blank track to the length you want did the trick.. Nothing in the manual about that. You saved my sanity !!!

YOU helped me SO MUCH! Thank you!

Great tips bro, thanks for this 😊

Oh ... my .... goodnesss... sooooo goood bro ty

They should offer a link to this video right on the freakin packaging man! I was getting so frustrated until i watched this. I had no idea how easy looping can be if you understand all the settings. Wow what a magical invention the 505 is!

bro these videos are perfect!

thank you Djymie!!

Great effort man thanks.

Very helpful! Thank you! :)

Super awesome vid! Keep it up! I watched this several times before upgrading to the mk2 thinking I would remember any of it😂 now I have turned this into a 2hr event because I keep pausing & messing with things lol I'm only half way through the vid this time lmaoo😂

Great video🙌✨

Super cool!

Thx a lot for the video - I learned MUCH more from it than from reading the rather thin manual. I have recently bought the RC 505 mk2 along with a Boss FS 7 pedal. Still I haven't found a good way to simply trigger several guitar tracks/loops with the pedal. All gear from the same brand....

hahahaha I love your intro already and your vibe !!!!!!!!!!

Thank you very much 🙏👌

Thank you for the updates in the comment section

awesome video thanks man

Thank you for this

Brother u r amazing thanks a lot

Hi DgyMie, are you wearing the DT770 pro? If so, do you run an amp for those headphones as they're 80ohms, or do you plug them straight into your mk2? I want to buy the DT770 but idk if the mk2 can run an 80ohm headphones.

Very useful tutorial many thanks. I am still finding a way to easily switch on/off my main output. (so when you record your song on phones (without running a through your monitors) and you want your music out of monitors, what is the routine??)

Thanks for this explanation. I'm having a really odd time with my RC505mk2, the input fx when recorded are quiet compared to previewing them. I really don't understand what I have done to make this happen. Any help would be greatly appreciated!

Great job thanks

Hi I have a question. The older version you could set a pre roll on your first track in the drum settings. Is the mkii capable of this function? For example on the old rc505 you could set the pre roll hit play hear a count in and record your loop. I haven't seen where this is possible on the mkii. Thanks

15:03: AUTO OFF: Turns the Auto Off function on/off. If this is “ON,” the power will turn off automatically when 10 hours have passed since you last played or operated the unit. Guess you did not touch your precious long enough for it to turn itself off XDD

Thanks a lot … merci beaucoup

7:48 SPEED CHANGE: Specifies the timing at which the playback speed switches to the speed set in TEMPO SYNC SPEED (p. 3). IMMEDIATE: The change will occur immediately. LOOP END: The change will occur after playback has reached the end of the loop. Seems like you were wrong. At least the ParameterGuide says nothing about the metronome ( :

Thank You!

Great video thanks How do you select a memory?

Thank will be a huge help, only comment, please so down just a bit, so much material here!

Nice video! How do you start recording with voice activation while holding the record buton? Or it only records on pressing the button?

Do you know how to turn down the metronome? Or do a count down before recording starts? Much appreciated!!

11:17 do you know where I can find a tutorial on assigning midi to an external device? I couldn't find a guide by inkie. Thank you!

Great video! Thanks. At 6:46 the Quantize setting is supposed to align the tempo of the loop to the rhythm that is used, but it seems that up to rel 1.21 this is not working great.

Hi, what mic are you using?? Also, I noticed your red dots on the loop rec are going way faster than mine…. What setting is this? Thanks

Hi! Thanks so much for a really helpful video. I was wondering if you could PLEASE help me with an issue I'm having. When I record my tracks with a certain input fx, the fx doesn't stay in the recording at all. It's like the fx works for the live output but not for the recorded loops. Do you know why this might be happening? I have also tried recording my loops with the track fx on but those don't record either...Thank you!!

Hello, great tutorial, well done. Can you tell me how to get Auto Rec to work on tracks using a MIDI keyboard and Ableton. Auto Rec only works with mic and guitar?

Is there a specific setting where which would make the recording start as soon as i press the record button instead of where it waits til i make a sound?

hello it is possible harmonize using a guitar put in mkII? I mean harmonize with the chords of guitar

Is the harmonizing/autotune of your mic a RC.505 effect or some external device?

hi, please what settings do you have on the loopstation at the beginning of the video when you sing? Thank you

Thankyou

I plan to use this as an audio interface as well. But i couldnt figure out how to make it so i dont hear myself in the mic all the time? Is there a solution?

So, when you set the measure length on a track, can you also setup auto record? Also, will it stop at the measure length? So if I want to record guitar, have it auto start, will it stop at the measure length set, so that you don't have to hit stop?

Hi bro I have a question Can the Boss RC-505 mk2 run 250ohm headphones?

Thanks for this great video! Curious, do you think it's a noticeable upgrade over the first version?

Hey DgyMie, do you know if the mkll has the quick clear feature? And if so, how would I enable it to my loopstation?

Do you find something like Noise Threshold on this mkII ? The original one has it but I cannot find it on this one !!! help! :)

where is the setting for when you start the first loop it turns on and synchs with drums? I had this on my mk1 cant find on mk2

Thanks for the video man! For some reason usage of some effects (such as OSC BOT) on my mk2 makes the sound volume really low, to hear something I need to turn the output level to the max possible value. Any idea why does it happen or how I can fix it?

Great tutorial! I’ve heard there are a lot of problems the the new version. Like forced quantitatization and others things. Would you still recommend this over the old version ?

Just received my mk2, and I'm still trying to work out how to get not only recordings, but overdubs to align -- both tempo and track sync are on, and I'm trying to have variable length measures (for ex. a simple percussion instrument on every beat, sampled only once, so I don't have to go through a whole 16 measure structure), another instrument with just a 4 measure structure, and the whole overall loop on 16 beats. When I try to do that, when either recording on new track or simply dubbing, the new record and/or dub gets cut off at the length of the previous track or dub. I've tried setting mesure size for each of the tracks to "auto", but that doesn't seem to do the trick for me. Will probably have to use Quantize also, since using acoustic instruments (with both hands) it's hard to perfectly time the playing and pressing of the button to record/dub.

How can we add the rec count simply like it's available in MKI? thanks

Excited to see what he has for all his settings Edit* first comment

Hey dgymie, how do i switch effect banks???

Re :) j'ai une petite question encore : je travaille avec un casque . Quand j'écoute ce que je joue avant de l'enregistrer , c'est de bien meilleure qualité que l'enregistrement fait derrière .....Pour resumer : je chante dans le micro . j'enregistre . et quand je met sur play c'est pas du tout la qualité de quand je chante dans le casque ! j'espere être clair :) merci si vous prenez le temps de me repondre encore une foi :)

does it have sidechain effect?

Maaaannnnn please help!!!! I want to record drumms, but I need my boss to play a few mesures with tempo before start recording. So - idea is to click record and start play drums then after few measures will start record.... Is that posibble? In MkI was posibility like that only for one measure.

My braaaaiiinnnn hurrrrtttsssss

What effects are you using to make the kick drum so bassy? Amazing how quickly you already know the machine dude. I still cant get one in england. Thanks for the info. Is it just extra bass eq?

Bonjour et merci pour cet excellent tuto :) je me demandais quels effets ou quels reglages avez vous fait pour obtenir cet effet sur votre voix au debut de la vidéo quand vous chantez :) ça ressemble à de l'autotune ....pouvez vous m'expliquez comment faire :) merci beaucoup et continuez :)

Dgymie i have my mkii now im really happy but my audio pops every couple of seconds making it hard to loop any tips?

Thxxxxxx

can anyone tell me why does my rc 505 mk2 stop/start require 2 presses?

Is there a way to duplicate or copy an entire memory and paste into a new empty memory? And not just channels of loops in the same memory?

I know this might sound stupid, but how do I setup up my rc-505 mkii unit so the input effects are recorded into the track I'm making? For some reason mine won't do it, unless of course I have some setting not set up correctly? Please let me know because I've been racking my brain trying to figure this out!

Hi! j'ai enfin reçu le mien, j'ai fait quelques réglages de gain comme le volume de la boite à rythme, le lendemain quand j'ai rallumé, le réglage était remis en "réglage usine", ou puis-je sauvegarder mes réglages? Merci

Can someone help. I cant get the input fx to be heard in real time. only after recording. I am using an external speaker plugged in the phones jack of the rc 505mk2. what could be wrong? Cant get the input fx to be heard with headphones either

Question for you unrelated to the loop station. What mic are you using & what would you recommend for a studio recording mic? I'm a hip-hop vocalist if that helps. Just hoping for some incite so I can make a well worth investment, & you seem like you know your shit. Thank you in advance!

When I edit input FX it saves it to a specific memory not a global save. Is this is a bug in my machine or this is how it is meant to go? I'd like to make global changes to the input fx so every memory I record onto shows the same input FX. Is this possible? Thanks

Hi, i have problem whit connection loop station whit mixer...doesn't work. I can't hear from loop anything. Could you help me whit connection (maybe cabels or).

Hola amigo¡¡ me gustaria preguntarte una cosa. El volumen del ritmo (rhythm) se puede controlar independiente al volumen de los track¿? Yo no encuentro la manera. Gracias¡¡

For some reason, my 5th track is the only track that wont speed up when i change the tempo. Is there a way i can fix this?

good

At 12:01 the ASSIGN setting, do they apply to all memory slots or can we individually assign settings to specific memory slots?

Is it possible, in your opinion, to get this unit and use it with an external footswitch using just RC 505 mk 2 for guitar effects (I wouldn't buy it INSTEAD of a guitar pedalboard, I need a looper, just wanted an all in one solution)? I just use clean sounds, I just need some delay, not much more... For the external pedalboard I thought about Beringher FCB1010. Thanx