Everything a Voiceover Artist Needs To Know about "NOISE FLOOR"

No video

Everything a Voiceover Artist Needs To Know about "NOISE FLOOR"

Рет қаралды 1,175

Жыл бұрын

Demystifying the what, why, and how of "Noise Floor" a common term and principle in voiceover. We'll cover not only what it is, and why it's important, but also how to improve it if you need to.
Buy me a coffee:
www.buymeacoffee.com/jaymyers...
Youlean Loudness Meter:
youlean.co/youlean-loudness-m...
One-on-One Coaching and more resources are available on my website:
www.jaymyersvoiceover.com
Other channels I've found helpful in learning about audio and voiceover:
‪@Podcastage‬ ‪@BoothJunkie‬ ‪@AudioUniversity‬ ‪@inthemix‬
/ podcastage
/ @audiouniversity
/ boothjunkievo
www.youtube.com/@inthemix/fea...
-----------------------------------------------------------------------------------------------------------------------
Music provided by Epidemic Sound

Пікірлер: 24

@jaymyersvoiceover Жыл бұрын

To note one important thing I didn't cover here: **COMPRESSION,** which can affect your noise floor after it's applied.

@banyanstudio 4 ай бұрын

SUPER HELPFUL!!!! Thank you so much for your expertise.

@jaymyersvoiceover 4 ай бұрын

You are so welcome!

@chasatch Жыл бұрын

Thanks for opening the door! I've seen too many noise floor explanations from inside a booth without the outside noise comparison!

@jaymyersvoiceover Жыл бұрын

Glad to hear it was helpful! Thanks for taking the time to let me know :)

@leannaMA 5 ай бұрын

Thank you so much! You answered the question that I've been searching for! I was afraid my -74db wasn't quiet enough. But now I feel a bit relieved. I would actually prefer it quieter, but for now, I guess what I'm working with is passable. Thanks again!!!

@jaymyersvoiceover 5 ай бұрын

Glad to help! Yeah it’s definitely one of those things I’ve spent far too much time worrying about for something that’s not a tremendous factor overall. -74dB is awesome!

@nickking5388 3 ай бұрын

This comment right here helped me so much. I've been stressing about the noise floor as my studio is in a closet that goes up into an attic so the stairs behind ne have a high ceiling and can make it more echo sounding. I put up foam panels and I've been trying to mess with and get this right but I was afraid ot wouldn't be good enough to make my demo or to do any type of professional work. But now I feel more confident

@darrah3854 4 ай бұрын

Thanks

@jaymyersvoiceover 4 ай бұрын

Of course!

@LucasGVoices_ Жыл бұрын

Your vid’s are so helpful thank you so much

@jaymyersvoiceover Жыл бұрын

Glad to hear! Thanks for taking the time to write 😊

@silverlake973 4 ай бұрын

You're like a young Bill DeWees!

@TomFria Жыл бұрын

Hi Jay. I just wanted to compliment you on your channel; you have a very comfortable manner. I too narrate audiobooks, and I enjoy your videos

@jaymyersvoiceover Жыл бұрын

Thanks for the kind words Tom!

@AlexMittsVOID Жыл бұрын

Hey, Jay! I recently discovered your channel, and there's great stuff here. Keep up the great work! One question that I can never seem to find the answer to regarding this topic is about where your gain should be when measuring your noise floor. Here, you say where you can get a usable level. I have always assumed that leaving my gain right in the middle or at 12:00 is probably the best place to set it when measuring my noise floor. However, in real life, I usually set the gain around 1:00 for most things. Do you have any thoughts on this? Is there a certain place where your gain should live based on your interface when measuring the noise floor? Is it whatever gain setting gets you -12 to -18 dB at conversational level? I would love to know your thoughts!

@jaymyersvoiceover Жыл бұрын

Hey! Thanks for the kind words, and glad you're finding it helpful. Great question, and I'll do my best. Some of this you may know already, but I'm going to start from square one. ;) Your noise floor will indeed be relative to where your gain is set while you're recording, but will also change depending on how much you boost your audio in post. If my levels when recording are too quiet and I need to boost by 10dB after, my noise floor will also go up by 10dB. I have a video that goes into more depth on "SETTING YOUR LEVELS" properly (which I think will explain things better than I can here), but in my professional experience most of the time you'll want your peaks to be bouncing between -6db to -12dB. That gives you the best balance of headroom and lower noise floor. For you, how loud you speak normally, and how sensitive your microphone is will determine where your gain knob ends up to get the appropriate level. Hope that helps! Let me know if any other questions pop up. and glad to have you here!

@RobKristjansson 9 ай бұрын

Just what I wanted to know about, @AlexMittsVOID! @@jaymyersvoiceover - given I always deliver with an integrated LUFS target in mind, I've always figured a recording that was in the -23 LUFS ballpark (+ or - a LUFS) was good, and if my noise floor was below -60 dB (true peak), I was in good shape. Does that make sense to you, Jay?

@BannerSound 4 ай бұрын

I use the Analyze>ACX Check in Audacity often while I do most of my recording and production on Adobe Audition. I also use the AA Amplitude Statistics as I am editing, but is there a method for checking noise floor, RMS and Normalization all in the same window like Audacity has?

@jaymyersvoiceover 4 ай бұрын

Good question! In Audition, the Aplitude Statistics window has all of that info, it's just labeled more 'technically' I suppose you could say. "Peak Amplitude" = The Normalized Peaks Minimum RMS Amplitude = Noise Floor

@liquidvelvetliterature Жыл бұрын

Great video! Jay, is this with your Apollo, and are you using C-vox? Or is that your natural floor?? And what is your input level? Thanks, man.

@jaymyersvoiceover Жыл бұрын

Hey hey! Yes it’s my Apollo solo with no DSP processing (ie no c-vox) and minimal EQ and compression in post. Essentially bare bones. For the u87 I’ve got my gain set to 38 dB and then normalized to -3 dB. Which adds between 5-7 dB overall.

@liquidvelvetliterature Жыл бұрын

@@jaymyersvoiceover Thanks! I must get a booth… Your Studiobricks is awesome. I was just pricing one. Holy cow…

@jaymyersvoiceover Жыл бұрын

They ain’t cheap for sure.