Huh. A company who's own YT channel isnt trash, and is like, completely useful, and genuinely informational without feeling like a corporate powerpoint presentation? Yes please!

The editing was amazing, the graphics were lovely, and the audio was mixed wonderfully with upbeat music and easily understood narration. Wonderful job!

Just installed a 0.6mm nozzle, and it is SO much faster than 0.4! Highly recommend trying it out.

wow, first time watching one of your vids. Extremely professional and clear - those graphics are so helpful in understanding what youre talking about. very impressed!

This was so ace; my nozzle jammed tonight and this convinced me to explore other sizes. Excellent presentation.

This is a great video, very interesting and useful but also amazing cinematography and production value

awesome video! thanks guys!

Hello i'm french and i love your vidéo because you explain slowly and it's easy to understand thank you

Thanks for a very informative and helpful video. Just bought a 0.8mm nozzle from E3D and after a couple of experiments have printed a really large, strong box/tray out of generic PLA. Upped the temperature to 225c, used 0.5mm layer height with a 0.4mm first layer and 1.0mm line width. Slowed the general speeds down to 30 to 40mms with 20mms first layer. The result was really successful, very strong and ideal for the purpose without wasting hours on tiny layers for a big object. Very encouraged by this video - changing the nozzle was easy and I am now going to try some smaller nozzles.

The inclusion of the Charpy test in the intro alone is sub-worthy. Great video!

Really great video! short and explains pro's and cons perfectly!

Great video, perfectly show cases the advantages and disadvantages of different nozzle sizes. I have a 0.3 and 0.5mm nozzle, but haven't tried them out.

The editing of this video is on point! So much credit! Well done :) graphics on point too! Yeet

Great video and really well produced! Thank you!

Could we also see the impact energy graph with the 1.0mm nozzle?

This video game me confidence to try a differnet nozzle on my mk3. Love it!

I’m fairly new to all this, and this was wonderfully done. I have a better understanding on some of the output aspects I’d not known or had been able to figure out.

Brilliant info, so we'll put together. Thank you

Wow... good job. The quality of these videos is awesome.

nice video, congratulations. it was just what I was looking for, many examples, and you showed them well, down to the smallest details. Also good for how you edited the video. thank you !

Incredible video. Super informational and fantastic editing (and screamy cowboy!?)

So happy I found this video! Awesome job!!!!!!!!!!

This video is still reference for explaining the different nozzle sizes ❤

Great explanation with examples. Thank you very much! 👍👍👍

Really good explanation and comparison! Greets from Argentina!

This video have everything i was looking for and more information that I didn’t knew what will help me. Perfect!

Well done awesome content and put together beautifully. Starting out researching on 3d you've saved me hours of research . New Sub thanks

thank you very much, as a printing newbie im on a binge watch of these informative videos. im absorbing information at a quick pace thank to people you sharing information and tests!.

one of the most educational videos I've watched pushed like a few times

I am just getting starting in the 3d printing world. I can't wait to try some different size nozzles for different projects. Thank you

Ok, half way through the video i had to stop to tell you that this very well put together! Subscribed!

Ahahahaaa... the Jimmy Bairnes part is hilarious. Thank you for your help about nozzles

6:20 if I ever had doubt in my mind that I love Prusa, it no longer exsits

Im sold, thank you for this information. I've been designing some launchers for airsoft and this is gonna help a lot

Incredibly useful video. Thank you.

This is such a good video. Extremely informational, and loved the presentation and examples. They were perfect. Thank you so much!

Great video! With all the graphics and comparisons！

This is an excellent video! Keep them coming.

Great video! I have been going to a .6mm nozzle lately and have been experimenting with .8mm and 1mm thick lines, this seems to increase layer bonding with the added pressure to make the lines wider, it has also impoved the surface quality of prints using CF-PA quite a bit. Forget about overhangs and bridging though.

The problem with using 1mm nozzles is that you have to also deal with heating. A hotend can only move heat to your filament so fast, so you often have to deal with that and lower the speed. I'm not sure how the MK3 handles that, but it seems like in the video it handled just fine. My robotics team has a massive 3d printer with an E3D volcano, and we usually have to slow down the print because the extruder can't move the filament fast enough, but that is a totally different reason.

Great video! Most of what I have printed requires very little detail so this would be perfect.

Finally someone explained this :) thanks!

I really liked the editing, good job, mates.

I respect them for being a legit company that still puts memes in the videos. Great video!

Excellent explanation!

Nice idea I never consider using a larger nozzle, but after this I see a advantage to it in some prints ... not everything but something can be a advantage....thanks for sharing....Jack

I was blown away by the quality I got when I first used a 0.2 mm nozzle. And supports are super easy to remove too. But even with super small prints the print time is huge. Sometimes it's not worth it, depending on the situation.

Super video, chválím tento přístup. Je to hodně poučné a nějaké věci sem ani nevěděl...

This is the kind of youtube videos as a guild for 3d printer - thanke you very much

Great video. Extremely informative.

Wow, what a gr8 video to learn from.....! Thx

Awesome job with this video, thanks for making this!

Fantastic comparison Dude! Thanks for sharing your knowledge!

Thanks for a informative video!

Great video!! I almost exclusively print with 1mm nozzles for the exact reasons mentioned

Good job, really helpful.

Brilliant instructions! Great job.

Nice job!! Great learning tips.

the cameras lenses comparison couldn't be more accurate and it is exactly the same case. Great video!

It's a shame that I only get the genuine Josef Prusa channel after 7 months in 3D world! Better late than never, so I subscribed and hit the "bell"... and off course the "thumbs UP!!!" Thank you sooooo much to bring down 3D printed technology to "regular people" and low budget scientific teams. A lot of "fun toys" will be printed, but it also help scientists around the world make new achievment. Joseph Prusa, you can be proud of yourselfe; your open mind attitude is a bless for Humanity. Alexandre Valiquette, from Québec, Canada

Excellent résumé ! Thanks! 👍🏻

Great video, very explanatory! I will definitely try the 1mm nozzle!

Awesome videos! You are going to be the best 3D printers made when not already and for shure when doing so awesome videos.

Very nicely done video, and helpful.

Good stuff, very well explained

great job thanks i got finally a clear view of the nozzles !!

The editing is awesome

We need preset settings for .8mm and 1mm nozzles, especially since the 1mm nozzle prints are demonstrated :(.

Thanks for the advice on this one! Really cut down print times on dungeon tiles in the last week!

I absolutely love the intro!

So helpful! Thank you!!

woosh, what a video! thank you bro. now i can decide more easily which nozzle i will buy

Terrific video, thanks!

Thank you for sharing your thoughts on this 👍

This was useful for me, thanks! I’m about to change the nozzle for the first time to a .06 curious to see what the results are.

As a mechanical engineer it took me waaayyyy too long to go up from the standard 0.4mm nozzle size. I have used a 0.8mm a bit, and I only want to go higher. For functional parts without tiny details, bigger, bigger and bigger still nozzles is the definite way to go.

Very educational, thanks!

Excellent video!

excellent video!

Fantastic video. Subscribed :D

Very nice and proffesional video!

starting of with video you got the best editor

I don't have 3D Printer, but in 1-2 weeks i will receive my first 3D Printer. I don't know much about them but i like this video! You can't find a lot of videos that not only explain but even show what is the difference! This video explain and show all what you need to know! Keep making videos like this, they realy help more than you know!

Great video and channel !

Really useful. Thank you

Very cool! I still remember the first time I printed ABS with a 0.6mm prusanozzle... very cool!

Just got my MK3 today and building it as we speak. So much fun. Can't wait to fire it up.

Great timing, got my Mk3 (kit version) about a week ago. Fantastic printer but was already thinking about larger nozzels as with my old (very old and worn out) k8200 I mostly needed and printed custom brackets and cases for projects. It was quicker than the mk3 but a pain to use all the bed area. Ordering a new nozzle now. :)

Thanks for your useful information

Nice Love this video Thank you very much for the information

Im looking to buy a 3D printer and this video gives u decent information. Good job

great informational video, im a novice 3d printing enthusiast and i can definately say i will be buying and using other nozzle sizes after this video.

Oh. My. God. I never knew i needed this until i found it.

I'm definitely going to try to reprint my last project in a larger nozzle. Thank you for the detailed comparison.

Very Helpful!

SOLD! Don't know that I'll go up to 1mm, but the other two look fantastic, and the saved print time for larger items which usually don't have that much fine detail is just phenomenal.

This was super helpful! Thank you!

Great video. Thank you.

I just wonder about the volumetric speed of the filament when using the 1mm nozzle. I noticed when printing at 120mm/s with .2 layers and a .4 nozzle that I was actually running into heating issues with PLA at 215 which in some cases only resulted in a slight color change but in others made it so the layers wouldn't adhere to each other.

Nice video ;) Anyway, I can't wait getting that PEI powder coated sheet shown in 1:39!