Let's go over all the cosmetics I've changed on my JCW to make it look as good as it does! Watch Part 2 here - • Everything I've Done T... Follow us on Instagram! @therealcollinryser @miata.mini
Пікірлер: 51
@piggradio17662 жыл бұрын
Hi, just found your video. Your mods look terrific and I really like the pace and style of your narration and camera work. Thanks for taking the time to share it!
@chrisbrewitt2 жыл бұрын
Big approval and thumbs up from here in the UK. Might pinch a couple of ideas for my JCW. I like the pro corner splitters and the outer red bonnet stripes.
@collinryser2 жыл бұрын
Of course, use every detail if you’d like. I was pretty proud of it.
@LisaRyanMD4 жыл бұрын
Love those spinning caps! Good job :)
@collinryser4 жыл бұрын
She knows me well 🙌🏻
@964cuplove11 ай бұрын
I’ve seen a more functional rear diffuser installed here on KZfaq. Especially if you have a straight exhaust installed !
@airbusxwb20473 жыл бұрын
Awesome video, definitely deserves a sub
@collinryser3 жыл бұрын
Thank you for the sub 🤙🏻
@ericvtutube3 жыл бұрын
Useful info. thanks!!!! would you be able to share info on you applied the alcantara fabric to the dash. I want to get rid of the piano black parts
@collinryser3 жыл бұрын
I used super thin 3m double sided tape. I considered spray adhesive but decided tape would be reversible.
@hsbd32734 жыл бұрын
I want to know the little details...Working mods! That's the exciting part!
@collinryser4 жыл бұрын
Go fast stuff 🤙🏻
@fernandojfm993 жыл бұрын
Hey man, loved the video. I want to know where did u get the Tow Strap? Thank you
@collinryser3 жыл бұрын
You can get them from Condor Speed Shop. www.condorspeedshop.com/products/condor-low-profile-tow-strap
@tannimoyana26434 жыл бұрын
Love your decals pal. Want them done to mine, im in the UK though. Any suggestions?
@collinryser4 жыл бұрын
Contact Todd here and see if he can ship to you - www.motoringstripes.com/contact
@danielkwon44073 жыл бұрын
love the rear diffuser!!! going to do the same on mine :)
@collinryser3 жыл бұрын
I was quite proud of the way it turned out. What color is your car?
@danielkwon44073 жыл бұрын
Mines moonwalk grey, I’ve noticed that it’s not painted at the bottom part and inside?
@collinryser3 жыл бұрын
Right, I ordered the rear diffuser for my car and once it arrived I had it painted in that area specifically. If you want to have the same thing done, just show whoever you take it to what you want and they should be able to mask the area off and only paint the center section.
@juliourquidi3 жыл бұрын
@Collin, did you have to modify anything on the Rockford Fosgate T142 Power 4" to get them to fit? I had someone try to install them in the back and then the front, but they said the magnets were too big.
@collinryser3 жыл бұрын
I did have to trim a bit of the speaker’s mounting bracket to get it to slide into the hole in the door panel, but I used the factory speaker bracket to mount them so the magnet clearance wasn’t an issue. If you want to send me a DM on Instagram I can send you a pic of what mine looked like.
@juliourquidi3 жыл бұрын
@@collinryser Will do. Thanks!
@kathycagg65314 жыл бұрын
“cause she loves me” ❤️ I enjoyed the video! The “click here” option didn’t show up on the screen tho’.
@collinryser4 жыл бұрын
Part 2 is not out yet, it will take me a few days.
@Sendbees4 жыл бұрын
Yes duke
@collinryser4 жыл бұрын
Yes
@cleysoptique87493 жыл бұрын
9:40 you do not have component speakers you have coaxial speakers unless you replaced the tweeters on the pillar coaxial means the Tweeter is flush mounted or just mounted in the middle of the speakers. component has the Tweeter separated like you would find in the most new vehicles.
@collinryser3 жыл бұрын
Right, I noticed I said that but they’re just coaxials.
@AlbaderBohamad9 ай бұрын
6:22 How do you have them work with the normal beams? Or have them work on an independent separate switch? Because I installed mine at the dealer and they were super smart to wire them so that they ONLY work when the high beams are on. So, I either drive 24/7 with my high beams on or not have them on at all.
@collinryser9 ай бұрын
I modified the wiring harness and cut out the bits that took signal from the high beams. What remained was just one relay with incoming power that went to a simple on/off switch on the dash that activated the lights.
@AlbaderBohamad9 ай бұрын
@@collinryser it'd be awesome if you'd make a video on this. I don't have the courage myself to tinker with cars wiring, and there's none on the internet that explains this
@DiscoFang9 ай бұрын
@@AlbaderBohamad Because it's fricking illegal. That's why no one is showing it.
@AlbaderBohamad9 ай бұрын
@@DiscoFang It is legal in other parts of the world
@skhaos18653 жыл бұрын
You should upgrade screen to 8.8" too 😎
@collinryser3 жыл бұрын
I might have if I had kept the car. 🤷🏻♂️
@nicholasmcquillin46593 жыл бұрын
Wat about suspension??
@collinryser3 жыл бұрын
Part 2 includes info about the suspension. 👍🏻
@luisangelsanchezolmedo94093 жыл бұрын
Hey the roof must be chill red
@collinryser3 жыл бұрын
If I had built it myself I may have done it that way, but I got it second hand and putting the red mirrors on it made me plenty happy.
@DiscoFang9 ай бұрын
That headlight highbeam "rig" is pretty douchey. it's not about people telling you what to do it's about dazzling other drivers. But hey, you do you, if that's all that matters.
@collinryser8 ай бұрын
This wasn’t something I was using with other people around, I get what you’re saying. And I hate when people drive with their brights on in the city. At the time those lights were something I was using for interstate driving at night when there really was no one else around. They were super bright and focused enough that they lit my lane ahead of me without lighting up oncoming traffic to my left.
@erickotapish6354 жыл бұрын
so u riced it out....what about motor mods....bigger turbo? down pipe? switch for diverter to a actual blow off valve? nothing????
@collinryser4 жыл бұрын
Hoping to get that video out next week. I have done a few things, making 285 to the wheels right now. Been working on the Miata recently.
@erickotapish6354 жыл бұрын
cool just looking for ideas I have an old 07 mini a with the turbo already swapped ..its fast af..need to get the head walnut blasted they dont tell u how much those direct injection cars will carbon up on the valves....I would suggest an oil catch can if u dont already have one
@collinryser4 жыл бұрын
Oh yeah, the second gens are really bad about that. Have you had it tuned after the turbo? My favorite power mod I’ve done has been the meth injection. Lots of cooling, lots of timing, lots of torque.
@erickotapish6354 жыл бұрын
yes there is an idea ....a little pricey but maybe worth it ....I knew u would give me something thanks
@erickotapish6354 жыл бұрын
just earned a sub look forward to see how u build it