Everything that could go wrong, Did go wrong... C4 Corvette Killing me! w/NODSOLEX Oasis 600

No video

Everything that could go wrong, Did go wrong... C4 Corvette Killing me! w/NODSOLEX Oasis 600

Рет қаралды 5,055

Күн бұрын

Get a NODSOLEX Oasis600: www.amazon.com...
Donate here.
▬ 𝐕𝐞𝐧𝐦𝐨: @roadsiderescueernest 𝑜𝓇 1(801)822-1477
▬ 𝐏𝐚𝐲𝐏𝐚𝐥: ernest@roadsiderescue.media 𝑜𝓇 1(801)822-1477
▬ 𝐂𝐚𝐬𝐡𝐚𝐩𝐩: $roadsiderescueernest 𝑜𝓇 1(801)822-1477
↓ become a 𝕮𝖍𝖆𝖓𝖓𝖊𝖑 𝕸𝖊𝖒𝖇𝖊𝖗 ↓
/ @roadsiderescue
🅴🅼🅰🅸🅻: ernest@roadsiderescue.media
#Roadsiderescue #Mobilemechanic #Ernest #HonestErnest #Roadsideservice #mobilemechanicBuisness #Roadsideassistance #Roadsidemechanic #Travelingmechainc
#𝕽𝖔𝖆𝖉𝖘𝖎𝖉𝖊 𝖗𝖊𝖘𝖈𝖚𝖊 #𝕸𝖔𝖇𝖎𝖑𝖊 𝖒𝖊𝖈𝖍𝖆𝖓𝖎𝖈 #єяиєѕт #єaяиєѕт #R̳o̳a̳d̳s̳i̳d̳e̳ ̳s̳e̳r̳v̳i̳c̳e̳ #𝔐𝔬𝔟𝔦𝔩𝔢 𝔪𝔢𝔠𝔥𝔞𝔫𝔦𝔠 𝔟𝔲𝔦𝔰𝔫𝔢𝔰𝔰 #ℛ𝑜𝒶𝒹𝓈𝒾𝒹𝑒 𝒶𝓈𝓈𝒾𝓈𝓉𝒶𝓃𝒸𝑒 #ℝ𝕠𝕒𝕕𝕤𝕚𝕕𝕖 𝕞𝕖𝕔𝕙𝕒𝕟𝕚𝕔

Пікірлер: 29

@RoadsideRescue 2 ай бұрын

Get a NODSOLEX Oasis600: www.amazon.com/dp/B0CZDPZFTP

@nottelling4828 2 ай бұрын

That generation Vette is a classic. One of the best looking cars ever to move down the road.

@danw.7605 2 ай бұрын

The injectors are probably pretty dirty as well.

@RoadsideRescue 2 ай бұрын

ya it has a second filter so Im hoping that caught everything...

@JasenFromBoston 10 күн бұрын

the psi is off by 10 psi 45 in no bueno for the 5.7 needs 58-62 and shouldnt drop more than 5 psi under load and 5 psi when shut off. powers grounds and injectors brofessor. tps is a potentiometer so as you step on the throttle the 5v signal wire should change as much as you give it gas

@billnahorn3939 2 ай бұрын

You should get one of those 10x10 pop up canopy, that would give you shade quickly. I always thought the part stores should have the metal canopy because they change wiper blades and batteries outside

@francantanimor 2 ай бұрын

Bought this in May this year and I think it helps when working on my car, have no garage. CROWN SHADES 10x10 Pop Up Canopy, Patented Center Lock One Push Tent Canopy, Newly Designed Storage Bag, 8 Stakes, 4 Ropes (10x10, Grey) Sold by: Crown Shade-2 Return window closed on Jun 2, 2024 $142.99 Condition: New

@francantanimor 2 ай бұрын

First time my neighbors helped with setting up. The next time I was able to set it up by myself, just takes a little bit longer, maybe 20 minutes to set up and tie down.

@RussellBooth1977 2 ай бұрын

I would've checked the fuel pressure & volume before replacing the pump. I can remember 31 years ago when I was a 15 year old work experience kid when someone poured sugar into the fuel tank of a Chrysler Valiant Regal which was built in Australia & it ran the 318 cubic inch Hemi V8 engine so the mechanic (apprentice who was the bosses son in this case) had to remove the fuel tank & they had it cleaned by our local radiator specialist before it was filled with new fuel !

@coreybabcock2023 2 ай бұрын

I replaced my TPS with a motocraft OEM sensor now i get better shifting and acceleration

@coreybabcock2023 2 ай бұрын

That tank should have been cleaned out TBH

@philheese1728 Ай бұрын

@@coreybabcock2023 Yeah, that probably should’ve been the first step. YOU’re just dragging the crap through the new fuel pump.

@coreybabcock2023 Ай бұрын

@@philheese1728 exactly I had to clean a tank on a 90 Celica and it was so bad I told the owner to just junk the car it's going to cost a lot to fix up

@coreybabcock2023 2 ай бұрын

My 98 Ford van had a bad pump clogged strainer and clogged filter i got it all fixed and cleaned up not a issue since and did it all myself this was about 2 3 years ago

@89G 2 ай бұрын

Ha! I saw that Vette at a Maverik a couple of weeks ago. Pretty sure it's Rustoleum Royal Blue.

@RoadsideRescue 2 ай бұрын

Ya same one... Ive got plenty of fotage trying to fix it there too... It still needs some work. Maybe maybe not another video to come.

@89G 2 ай бұрын

@@RoadsideRescue C4's are an electrical nightmare. I recently rebuilt the charge harness, and fixed some fusible link issues on my friend's 94. I do hope we get some more footage of this one! ----- The reason this car in the video caught my eye was it is the same color I used on my 88 Mustang.

@jayflex1000 2 ай бұрын

I did this on my 87 corvette last year wasn’t that bad to do but taking off the hoses was most pain lolol. They where so fragile to take off.

@marcosrodriguez792 2 ай бұрын

So what was the problem?

@Longtrailside 2 ай бұрын

Flux capacitor....

@RoadsideRescue 2 ай бұрын

MAF when unplugged it idled fine

@kfg7733 2 ай бұрын

Ive owned close to 20 TPI cars. Every one of them are problems just like this. Runs fine one day next day 5 things magically dont work and the door falls off

@robbobsjobs8456 2 ай бұрын

I was gunna say the IAC valve.

@RoadsideRescue 2 ай бұрын

was thinking that too

@roscoe7075 2 ай бұрын

I've had duralast tps and ignition module be bad on Chevrolets usually go with ac Delco or oriellys ignition modules works

@ironcross420 2 ай бұрын

Hope those electronic fan and tools are brushless... Had a guy working with a big gas station service company blew himself up in the man way using brushed power tools and non spark proof shovel. He should of known better. That system is still down since 2019 when the incident happened. You can have right/high pressure but low volume. Get ya a popup tent, becool suit, those boonie hats you run under water for 2 hours cool..