I use one of these chopsaws everyday at work. If you go through the steel at a sensible speed the blades last a lot longer than the claimed 20 times longer than an abrasive blade. I had one of these blades in for 7 months and used it everyday until I had 2 days off work and some idiot was cutting steel too fast with too much pressure on the blade so I had to change it when I got back to work. The trick is to let the saw do the work and cut at it’s own speed with gentle pressure on the blade and the blades will almost last forever. These saws are Awesome !

Saw this video last week, ordered the saw that evening, it arrived a few days later, I have been using it and love it. Better than any metal saws I have had before. Thanks for this video, I would not have bought this saw without this and the comments here.

Congratulations with your new equipment. Thank you for sharing your story

Congratulations on your new tool. I remember the first day i got my new chop saw. It was like the first day with a new wife--except I didn't have to train it or pretend I was listening to it. All things should be as easy as getting a new chop saw.

Nice. Now people don’t have to be worried about you burning down your shop. It is nice that Evolution sent you the “blue” model instead of the “yellow/orange” one. Yours has the cast metal base instead of the stamped metal base that some people complain about. A big improvement over your grinder cuts. 👍🏻👍🏻👍🏻

I have bought also Evosaw355, thank you for example. Is very fast making clean cuts. I am trucker and reairing and building everythint to truck and also old excawator so dont need it so much like you, but helps really much me too.

My Evolution Saw is over 10 years old. Still good as new !

Congrats! Beautiful tool!

Sweet! Been looking for a video on these blades. And congrats!

That pic made me watch and the video made me subscribe. diy for life!

Very happy for you! It does a great job on threaded rod too. Make sure you are always making chips with it. The chips carry away the heat. Just nice even firm pressure on the cut.

Parabéns pela aquisição Donn!

that's pretty neat, faster then my abrasive disc for sure. it's a winner!

I was cringing while you were cutting the solid bar I was wondering should u use liquid cutting spray to help

That’s putting your tools to the test! You might need a new blade now 😂

This is very nice and 100% great cutter. Woooww. I 💛 it

Sweet saw Donn, about time. Its going to save you so much time and energy.

Think of the time you'll save. Nice tool addition.

The people who worry about sparks should be more concerned with the nasty dust that abrasive saws/grinders make. hacking metal dust out of your lungs and blowing rusty black boogers out of your nose is way more dangerous than some sparks hitting the ground.

great addition to your shop. Nice birthday present!!

I was born with my favorite tool!!

LIKE,testado ao extremo e aprovado. SHOW parabéns. Um forte abraço e fique com DEUs.

chips are looking awful hot/molten around the 4:00 mark.. is the blade still good? wonder if it was too much feed pressure or if it just shouldnt cut this much without a break to cooldown at the halfway point maybe manually spray some coolant on the larger cuts like these

I have used a 14" Evolution chop saw for years and love it, when I figured out the reason why it cuts steel so well (slow speed) I took a table saw and slowed the blade to 1700 rpm and with a cheap 71/4" 40 tooth carbide ($10:00) wood blade. I can cut steel almost as fast as wood with all the accuracy that's built in the table saw. Nobody has this on KZfaq. This will be the next best tool you will use

Really nice tool im glad you found a safer alternative that puppy cuts really clean

You cut a 90 mm steel rod with an angle grinder lol I feel your pain brother

The first time I saw this saw was at a trade show. I chopped a quarter inch steel plate. I got no swarf on my clothes. I was wearing a suit. We bought 4 of these for my installation teams.

Thank you for your time

Really nice tool. Negative pitch rake carbide teeth really does the job well

Donde comprar el Disco por favor.gracias por subir el video.muy buena herramienta.ya las tengo pero no el disco.

I've been eyeing one for AWHILE but I thought they had I recommend dia. limit like one inch.for solids....and only so thick..of plate! what the recommendations?

I bought this saw many years ago, on sale at Sears for about $200, It still works perfect after many years of use. One of the best investments in tools in my life.

Espectacular fantastica maquina sensitiva,,LA MEJOR,saludos desde POSADAS,ARGENTINA

Great👍👍👍 awesome..!!!!

Where I can get this tool I want it

Oh my goodness! It's great 👏👏👏

I have that same saw. It is absolutely excellent. Mine had the switch in the handle go bad. Their customer service was outstanding. You’ll be very happy with that saw. Don’t cheap out on the blades. Get the evo blades. Also, do be careful cutting small pieces. I cut a piece of 5/8” square bar and the little chunk got caught up into the guard, between it and the blade. It was wedged in there and cracked the guard. Took it apart, got the piece out. Everything still working great.

Bem vindo ao futuro, chega de disco abrasivo!

Having used both a metal chop saw and a band saw in a machinist shop work I still prefer the bandsaw. Yes they can be a bit more bulky and can take up space, but with them you can run a cutting coolant to prolong the life of the blade. Where with a chop saw I've seen coolant used on them and warp the blade. And they can qet very expen$ive. Milwaukee brand makes a 'PORTA-BAND' saw that in many cases are much better option to a chop saw.

Good luck, Donn!

Parabéns querreiro por fazer uma postagem de uma ferramenta tal utilizado por muitos no país de primeiro mundo! Um sonho de consumo para muitos profissionais que utiliza uma ferramenta desse modelo! Temos no Brasil inúmeras marcas de policortes mais em relação aos discos de cortes para ferragem em Gerais só temos ainda os convencionais! Estamos precisando desse tipo de disco em aço com videa aqui no Brasil. Quem sabe no próximo século.

As much as I love using my everlast plasma cutter, this would make a fine addition to my shop.

Looks awesome, I want one. I think a squirt of WD40 or other lubricant during the cut would go a long way to keep your blade cooler and cut even faster\cleaner

Great tool. Congrats on the new man toy (tool)

Amezing tool👍

Why you don't put the link where you bought bro?

Nice.

awesome hand tools

Muy buen disco y la maquina tambien, genial. Saludos

Muito bom 👍

Did that round stock cook that new blade?

aleluiaaaa, como demorou, os serralheiros de ferro agradecem

Great new saw.

that's the end of that blade

I was willing to buy one until I saw the price of replacement blades. Some guys seem to get good length of time on them but then I see guys go dull after chopping for a week or 2. Especially thick stock the retains the heat and traps the blade between. Like your solid round bar. The ones here in the U.S are a little different but I can't see them more than a color change. I don't know, I've gotten burned trying the new fad and then it dries up with nmo support. My shop is small and I do custom work so my profit is pretty tight. I should have jumped on the yt train to get all the free stuff though I don't like owing anyone even if it's a kind word. I'd rather give the m the weird becasuse I like them not because they gave me something.

Cuando yo compré mi Makita LC 1230 (con mucho esfuerzo) como tú, también me puse a cortar a lo loco, y no salía de mi asombro. Hoy, tengo que reemplazar el disco y la verdad que se hace muy pesado. Aprovéchala y respeta lo que diga la hoja, no cortes metal para el cual la hoja no fue construida. Felicidades!!

Extraordinar , fantastic !!!!!!

During to cutting iff bore oil applied blades will last longer

Opa!! Enfim alguém posta um equipamento que há muito deveríamos ter a disposição no Brasil, Gostaria que me informase como foi o procedimento pra trazê-la, ou como adquiriu no Brasil, se há importadores, e os valores? Como está sendo tua experiência agora que você tem mais qualidade de acabamento. Não deu pra perceber, mas qual é o nível de ruído que ela produz?

Super saw my friend real good stuff

Hello, congratulations for Your video, i wanted to ask you how long does a record last?

Adoraria poder comprar uma máquina dessas...

love my evolution but you better really clamp material down, blades seem to last forever

it is a beautiful cut

How's the blade holding up cutting the solid rod? Neat there are diamond blades I just found out for cutting stone and masonry... plus the stainless steel blades and multi-purpose blades. Thanks for sharing!

Great professional saw, can you give the price?

классная пила !!!!

well deserved.. pained me to watch all those cuts with an angle grinder lol.. even though you managed to make really clean cuts with it

Those saws are great!

RIP head phone users! 😉

Здравствуйте, я балдею от вашей тарцовки по металлу. Сколько она стойт? Пришлите хотя-бы характеристики диска от нее

Very useful machine

I have one in my Knife Making shop..I purchased the stainless cutting blades. I bought a spare blade convinced it would fail quickly. I have never had to change blades. Very impressive! I cut mostly ATS-34 and 154-CPM with it. Very tough steels! KnifeMaker

I don't think I've ever watched a video on KZfaq that required hearing protection. Ouch.

· If use of water would have been more good

That 90mm solid bar stock test was a good test.

Hi, I was watching saw and it seemed spectacular to me that I love working with metals, it would make my job easier and it would save time since I would not have to clean the cut edges very much. I would like to know if I can get it in Lima Peru.

Your going to kill your blade sawing square tubing like that! Those sparks are from the blade trailing edge friction. TCT welded inserts on the blade will chip easily with this style of cutting.

I would stay away from those saws because the blades are so expensive, get a bandsaw with liquid cooling.. those blades will last a long time because they don’t get that hot.Besides the circular metal saws throw chips all over the place which are dangerous. A trip to the hospital is very expensive.

not even kidding, I was considering sending you a chop saw last night!!

Beautiful

the things a pos. I just threw mine away. I don't recommend this brand to anyone. Mine ate blades and they couldn't be resharpened because the blades were always cracked. When I contacted the company they told me it was my fault because I had too much vibration. Saw had bad bearings and they refused to stand behind the product. The casing cracked and parts fell off.

Has anybody else gone deaf yet??

Worth buying good products,i like it very much nothing much to say hats off evosaw 355

¡Gracias!

Awesome! I want one!

Very nice machine

Very nice tool

That did a nice job

Hi Donn. I have 2 or 3 questions for you. 1 Do you really have a method of cutting with this kind of saw? How long is it before you dress it up? and you cut almost anything and any size and cut it long. Because I just bought a blade which has a max of 4200rpm and my saw is 3500 rpm I cut 5 pieces of 2 '' round tube and 5-6 cuts in 1x1 1/8 square tube and the that does not cut again. THE big question is in your opinion is it worth it kind of saw which is quite expensive or a band saw which is much larger. excuse my english i am french canadian thank's .

Im thinking of getting one for cutting 50mm solid round steel bar. Can you estimate how many square cuts I would get from a new blade?

I have an older evolution, no problems, awsome saw

hi i have a question, can I cut box section(size 60 mm x 80mm)in 45° with the evosaw355?

Hermosa máquina 👍

Nice job

amazing👍👍👍

Good job 👍👍👍

Yay! I was thinking of a cut-off tool every time I see you use a grinder to cut stock. Not only will you now get faster cuts, but will save you time when you carefully lay out cut marks on each side of a tube, etc. And the cut is so clean and straight with so little effort. I hope you enjoy each slice.

I like my chop saw! It makes a lot better sparks!!

Una maravilla de tronzadora. Necesitó una máquina.