"Evry Mod" Install on BEW PD TDI: Fuel resistor and MAF Diode mod

Рет қаралды 7,613

8 ай бұрын

Up today we're doing a "budget" PD TDI mod install in preparation for a more indepth budget TDI video. Since the EVRY mod smoke switch doesnt work on PD TDI's were doing the fuel resistor mod along with MAF Diode mod to add fuel and disable fuel limiters

Пікірлер: 31

@abdelmadjidkara 7 ай бұрын

شكرا على المعلومات القيمة ❤

@Kordie78 8 ай бұрын

I would also like to see how you can make your own tune for the PD engines please!

@JoshsJettas 8 ай бұрын

I responded to Riley but I definitely can, it’ll be a lengthy one though

@skylerwright8172 7 ай бұрын

What Diode and resistors did you use?

@Anthony_Gordon_69 29 күн бұрын

Is this bad for the motor? And also is that the stock exhaust?

@rileycates5049 8 ай бұрын

Would love to see a video on hiw you made your own tune.

@JoshsJettas 8 ай бұрын

I wasn’t going to but I can whip a video up, I’ll warn you it will get lengthy

@thebikeguy8604 6 ай бұрын

@@JoshsJettaswhat software did you use

@JoshsJettas 6 ай бұрын

EDCmasterHP, it’s for a free 1 month demo then it’s something like 10€ a month. Finds all the maps automatically

@Brianfader 27 күн бұрын

By doing the evry mod, will it affect the injector deviation?? I have cyl 4 injector deviation at 1.27 mg/ str and cyl 2 at 0.87

@JoshsJettas 26 күн бұрын

I imagine so, your telling it that it needs more fuel then it actually needs.

@hunterbell5451 5 ай бұрын

Would there be a way to put it on a switch to turn it on and off or just have to pull it out when you don’t want it

@JoshsJettas 5 ай бұрын

I would imagine a switch inline would work, then switch it off which would make an open circuit and default at 40C

@Vivianauxito 8 ай бұрын

Hey,Josh. I was wondering if you received email from our team. We reached out to you twice and no response from you yet

@jeremiahleydig1528 Ай бұрын

Do you plug them back in with the diode and resistor or leave them hang?

@JoshsJettas Ай бұрын

Nope leave it unplugged

@arkprehistoricosservers7346 3 ай бұрын

hi i have same engine but when i put that in maf sensor car rougth idle! and i check i conect all good but car shaking a lot!! haaha

@auldenselby4772 Ай бұрын

I have the same motor and used the same resistor and diode but it wont idele and shuts off but its completely stock no deletes

@JoshsJettas Ай бұрын

I’d use a scanner and see what it’s saying maybe try dialing the fuel temp resistor back a but

@VWarmy 2 ай бұрын

Fellow Ontarian !

@JoshsJettas 2 ай бұрын

Yes sir

@VWarmy 2 ай бұрын

@@JoshsJettas what area are you around ? I'm getting ready to do a ALH tdi swap on my 07 City Golf rally car build

@noname-he8zn 4 ай бұрын

I cant get it to work on my Bjb engine i used the same diode and tried down to 37 r and it just runs the same

@JoshsJettas 4 ай бұрын

It must have a different smoke limiter, some use the maf sensor and some are lambda based

@noname-he8zn 4 ай бұрын

@@JoshsJettasHow can I change that. But wouldn’t my engine still smoke if I used a 37 ohms in the fuel sensor

@JoshsJettas 4 ай бұрын

No the smoke limiter has the ultimate say. The fuel sensor might be saying inject 30mg/str but if the fuel limiter says I only want 20 that’s all it gets. I’m not familiar with that engine but you might be needing a tune

@noname-he8zn Ай бұрын

@@JoshsJettasI bought a reader and can see that the exhaust gas recirculat(actual) also jumped to 1275 but my exhaust gas recirculat(spec) won’t jump any higher

@noname-he8zn Ай бұрын

⁠@@JoshsJettasdo you know if I can do any diode or resister mod to lambda?

@skylerwright8172 7 ай бұрын

Sorry I meant what wattage?

@JoshsJettas 6 ай бұрын

100 ohm resister for the fuel temp sensor and 1n4148 diode for the maf

@setamies8988 Ай бұрын

@@JoshsJettasare these the best ones for the pd 1.9tdi? I'd like my car to smoke as much as possible😂