Love your vids man, keep up the great work!

That blinkning mode are awesome for construction stuff

Great vid, I think the strobe affect would be cool with underglow, making the LED diodes flash around

This is awesome! Thanks a lot for sharing 👍

Great job sir ;-) 👍🏻👍🏻

Strobe is cool , say for display shelf queen builds .

Hey man so I have a proline dual led lightbar 6v-12v for the xmaxx im putting on my scx10 ii 6x6 I have a castle 10a bec an a HW 1080 but the stock servo needs 6v how can i power up the lightbar to 7.4 or higher with everything else at 6v for now

I am wandering, the controller receiver wire has power which is going to receiver. you have given seperate power to receiver via BEC. looks you are giving multiple inputs to receiver ?

Hey man, thanks for this! I've been building controllers out of old servos for awhile too. My problem with that is I cheap out and only harvest boards from old, stripped out servos and my stock only has old analog boards. Now that I'm getting newer radios they are mostly digital only and as you probably know, analog servo boards and digital receivers don't always get along. So have you had any issues with those ebay controllers heating up when used on receivers rated for digital only servos? Or is that just a Spektrum quirk? The stock stuff I took out of my TRX4 seems to not play well with analog servo boards either so I'm thinking not.

Thanks for posting this! I just ordered 4 sets just to have in my parts bin for future projects. I wonder if the light controller will still work if you run 6v or 7.2v (2s) batteries? I guess I can try in about 3-4 weeks when my order comes in :-)

How will can I run lights like that with a big battery hooked up

the style of that light controller is the standard design used for non-surface based vehicles like drones and planes and the blinking feature is probably meant for navigation lights because as i understand it, according to the new FAA requirements all RC air vehicles that require FAA registered are also required to run blinking navigation lights the same as full size aircraft. all the surface vehicle light controllers I've seen and which i have myself, all are encased in hard plastic enclosures that kinda look like receivers. components designed for air vehicles are usually just heat shrinked instead of being enclosed a case to save weight, that's my best guess....

Thank you

I just now got one I'm using a up to 12v proline xmaxx dual led bar an some cheap lights on my front bumper an probably gonna add more any advice I'm still new to the hobby would definitely help

“3 outputs not really sure what for” - maybe 3 lights..... ?

Nice video cool way to do it

the wire you disconnected from channel 3. Please reconnect it and see if TAPPING the input on that channel will switch which lights are on. What you are doing is holding that channel on and the set is running through it's possible options. Try connecting it to channel 2 (for testing my theory) and 'blip' the throttle .... You'll get only the round lights ... then with another blip you'll get the round lights and one light bar, and with the next blip you'll get both light bars .. etc. Please?

Thanks for the vid. Link is broken. Could you add the name of the item that you purchased on ebay?