This is the company id want building our Ranger Raptor
@Exodus4x42 ай бұрын
🫡
@midgeta68642 ай бұрын
Finally an off-road video at speed not crawling over rocks!! Love the Baja action!
@bwright1991Ай бұрын
The Ford Performance oil catch cans would be a good idea, as well.
@stevesguns2 ай бұрын
Raptor is King for this type of stuff.
@fiftyshadesofurban2 ай бұрын
13:43 This is the best ad ever for whatever stabilization tool is being used on that camera lol.
@Exodus4x42 ай бұрын
😂 to be fair the truck is pretty smooth, but the GoPro12 did its job
@isaiahdesilva9327Ай бұрын
Intercooler upgrade…tune! All that good engine upgrades next🤔Haha overall perfect clean nice build! Alll u need already💯can’t wait to see more of this ranger raptor build!
@scottneal27382 күн бұрын
I remember the day when people only shot to get 35's and now.....yep....bigger than 35's. It's crazy 🤪
@DeadGame02342 ай бұрын
Kick ass video, thoroughly enjoyed it 🤙 At 3,000 miles on mine and been giving her hell. Can’t wait to tune it
@craftwerks56442 ай бұрын
Right at 12:11 that's us sitting in our chairs next to our trailer watching y'all take off!
@turbobros_online156111 күн бұрын
YEAH!
@user-xn7fu5pe7f2 ай бұрын
Looking sweet! Love what you are doing with the Raptor Ranger, cant wait for more.
@manuelgarcia9790Ай бұрын
I’m a practical man what is this 2024 Ranger Raptor Bullet Proof modification going to cost the “Practical Man”?
@Dark_Templar28Ай бұрын
It’s a “budget build” first thing he pulls out is a yoked steering shaft and billet links. 😅
@markely758718 күн бұрын
The UCA is a mortgage payment.
@manuelgarcia97909 күн бұрын
I don’t mind doing an upgrade but I’d wish he’d comment so I could know a ballpark figure and go to his shop and get it done.
@DavidFigs2 ай бұрын
Well looks like I got my parts list! Awesome video and amazing build, see you guys in Texas soon
@executive_coach_andyobrien18272 ай бұрын
For sale 2022 Gladiator- Looking for a Raptor! 😂😢😢😂 Awesome Video and build..
@Raven007142 ай бұрын
I love mine too
@Tony-hf9mv2 ай бұрын
Got 9236 miles on my ranger raptor. Savannah to moab and everywhere in-between. Conquered Hell's revenge with it stock. Might want to look into getting the trans bullet proofed. Mine has slipped 3rd 5 times already. Seems to only happen on light throttle but it shouldn't happen at all One thing that really needs changed is that 107 speed limiter. Thru Texas and New Mexico at 80 and 85 (90-95) speed limits there isn't much room for passing
@Exodus4x42 ай бұрын
Good info. I know SunCoast has some kits that will do that, I’ll reach out to them!
@DanielMosso-v4d21 сағат бұрын
Throttle limiter sucks but they do it because that’s the top speed the OEM tires are rated for
@ttecsolar2846Ай бұрын
Dude that's like "driving miss daisy" come to Australia and I'll show you how we drive a fully modified TickFord Raptor.
@Shortarmslonglegs2 ай бұрын
Nice work Bubba
@pcoakle12 ай бұрын
Man that leveling makes a huge difference and those are some outstanding upgrades. Would you care to share approximate cost to do these upgrades? Everything you did totally made sense to beef up the front-end. I'm about 900 miles into my new RR and I love it.
@Exodus4x42 ай бұрын
Everything you see in this video would probably run around $14k installed. I never put the price in the videos because as soon as I do, someone will probably change the price
@slimtim042 ай бұрын
Does that include wheels/tires?
@manuelgarcia97909 күн бұрын
@@pcoakle1 Thanks! I got my answer. Thats do able. I can work a little overtime and then plan on a visit for an upgrade!
@manuelgarcia97909 күн бұрын
@@Exodus4x4 Thanks! Thats do able. I can work a little overtime and then schedule a build for my Ranger Raptor
@caryrichardson3382 ай бұрын
Tire sledge hammer works too. As long as you don’t hit your wheel bad enough to damage it.
@AdamTheWolf2 ай бұрын
New to the channel from this video. Subscribed.
@Yeeyee_jeeps24 күн бұрын
It’s cool, but the gladiator sounded 1000% better 😉
@Exodus4x413 күн бұрын
😂
@TheZR2Kid2 ай бұрын
Why do yall not do builds on the Chevy Colorado ZR2?
@Exodus4x42 ай бұрын
The market doesn’t support it
@TheZR2Kid2 ай бұрын
@@Exodus4x4 Man that’s terrible because the ZR2 is such a great platform
@jaredmeche63252 ай бұрын
@@Exodus4x4 Hopefully this 3rd gen changes that. They really went for Tacoma's throat with the ZR2.
@Travisj99352 ай бұрын
@@Exodus4x4wow really? Omg more people own Zr2 than Ranger raptor 😂
@TheZR2Kid2 ай бұрын
@@Travisj9935 EXACTLY! 😂
@joshz77122 ай бұрын
I don't have a RR yet, ordering early 2025. I'm planning a build. I already know what to do cause i had a 19 Raptor, but the RR is something I've wanted since i knew about it.
@Exodus4x42 ай бұрын
It’s so good
@joshz77122 ай бұрын
@@Exodus4x4 I never thought of replacing the steering column, honestly tho, I don't trust mechanic shops in my area and my RR is going to be my daily.
@GearUpAndGo232 ай бұрын
You forgot the most important mod of all, window ventshades.
@Exodus4x42 ай бұрын
Ugh, seen it
@lloydrage2 ай бұрын
Very impressive build !
@mikes.8305Ай бұрын
im ready, but im in CA...
@chrislarsen10332 ай бұрын
Awesome
@Exodus4x42 ай бұрын
Thanks Chris!
@fields_day2 ай бұрын
Every time you say the tie rods are little pieces of shit it makes me crack up 😂
@Exodus4x42 ай бұрын
I’m sure Ford appreciates me
@mdhandley11Ай бұрын
what would you suggest for someonr that wants to just stick with the 33 inch tires? would you still level it? would you still replace the rack and tie rods?
@alabasteralcoveАй бұрын
I second this question.
@fiftyshadesofurban2 ай бұрын
18:00 I was nearly sold on getting this truck over the Tacoma but then when TFL did their Moab test there were some really concerning things like the vehicle slipping on slopes and just falling down and being unable to climb up certain hills without engaging both front and rear lockers.
@Exodus4x42 ай бұрын
I don’t really care to do anything with this truck that involves Moab and lockers lol
@nihontoman2 ай бұрын
Look at it this way - with the ranger, you have everything you need mechanically to do all that rock crawlly stuff and with the tacoma, you have a really good software trying it's best to imitate what the ranger has 😃
@fiftyshadesofurban2 ай бұрын
@@nihontoman In the TFL video it slipped really bad on the rocks. It literally slipped off the edge of a drop on a decline. In that situation it was just a straight down drop, but it could easily cause the vehicle to roll over.
@nihontoman2 ай бұрын
@@fiftyshadesofurban have not seen it, but slipping could also just be that - slipping. Maybe the tires didn't perform? What i want to say is, was it really because of some fault in the 4wd of the ranger?
@seadoomania2 ай бұрын
37 ? Give yourself an uppercut , it’s just a ranger braz
@scottneal27382 күн бұрын
Well those parts are stronger but does that mean the other areas are more likely to break under that load that is way more expensive/important? I know companies make those parts the first line of breakage to save other parts.
@Tony-hf9mv2 ай бұрын
I missed the texas raptor run but ran into a lot of people at the hotel who did it
@Exodus4x42 ай бұрын
It was a blast, again!
@66racer2 ай бұрын
Dang, ok thats how it should have come from the factory. 35s do the trick. A stock Raptor pulled up next to me the other day and it just wasn't that impressive looking. This thing would have me trading in my '21 Ranger lol
@Exodus4x42 ай бұрын
Thank you!
@66racer2 ай бұрын
@@Exodus4x4 I'm not as rough on my truck but never seen anything like this for the gen5 Ranger. That rack is so dang nice. I was bummed to hear there are no gearing options for my Ranger outside of a diff swap. At least that is what APG told me.
@jessitaylor41702 ай бұрын
Sweet upgrades, will you be doing any performance upgrades to it?
@Exodus4x42 ай бұрын
Oh for sure, waiting a little longer to see who rises to the top before jumping on anything. Some big numbers out there though.
@bennyhauna72932 ай бұрын
For the ignorant one here.. (me. its totally me). When you add parts and all that jazz to all of the ford electronics, how do the different drive modes handle that? Do you have to install your own software to make up for it?
@Exodus4x42 ай бұрын
No, you can adjust parameters using software that’s available online.
@2006lexusis250Ай бұрын
Would a 35 inch tire fit with a 17x8.5-10 offset wheel?
@Travisj99352 ай бұрын
Not all of us won the lottery. Perch level will just ruin the suspension 🙄 Looks like it rides like you added tons of preload.
@CoyoteCartel412Ай бұрын
Perch collars have been used for YEARS on Raptor F150s and love valve systems. Absolutely nothing wrong with a perch collar.
@bryy205310 күн бұрын
So the first mod i want to do is keep it on 33s and level it out. Did i hear you right it needs to be the 2 incn perch collar for that, or is that for the 35s?
@pmassey22 ай бұрын
You said on a budget, what's the price on all of the stuff you did?
@Exodus4x42 ай бұрын
Budget is not the word I should’ve used to describe it. About $14k for all the parts you see in this video including install.
@pmassey22 ай бұрын
@@Exodus4x4 I sure wish I had that much expendable right now, I'd love to do that to mine too.
@GatorOverland2 ай бұрын
🤘🏼🤘🏼🤘🏼
@BrandonH113822 күн бұрын
Any plans to do this with the new Chevy Colorado bison?
@Exodus4x413 күн бұрын
I wish I had the money to try them all!
@BrandonH113813 күн бұрын
@@Exodus4x4 understandable. Thanks for all the info you provide.
@jacquessmit87902 ай бұрын
I have the old bazda bt 50 3.0Lt crdi same as ford ranger pk 2007 to 2010 and the tie rod ens are so fucking weak its been a real problem and i cant seem to find stronger after market tie rods.
@user-re7bl8ki6z15 күн бұрын
Can you run perch collars and strut spacers?
@scottneal27382 күн бұрын
The arms should have been replaced with a new beefer design. There was some for the 2019-2023 last I remember.
@711mx32 ай бұрын
Amazing, any cutting required for the 35's? Got 35's on mine with 2" spacers and they rub on the inside.
@WilliamGadberryАй бұрын
what size rim did you go with can you list parts list?
@scottloone5282 ай бұрын
How many hours of labor is this conversion?
@DUNEATV2 ай бұрын
I think my eyes have turned into dollar signs and my eyelids are making cash register sounds… 💰
@torana65312 ай бұрын
Did anything need trimming to put the wheel and Tyre choice?
@Exodus4x42 ай бұрын
Yes there is some minor trimming that needs to be done, but we didn’t in the video. Took it straight offroad and found ALL the rubbing areas. All behind the tire
@SoCalMikey2 ай бұрын
Very cool, what's the cost of this job if we were you send you our RR?
@AdventuresOfRogersAndHenderson2 ай бұрын
What rear axle is in the Ranger Raptor? D50 like the Bronco Raptor?
@realhqcustomsАй бұрын
How much do the parts cost to do this to the steering? I haven't seen anyone talking about this issue in australia, might need to get it done before im caught out, cheers
@richardagostino50852 ай бұрын
I mean it’s cool you fixed the factory garbage but compared to the other builds you usually do that was kinda lackluster 🤷♂️
@Exodus4x42 ай бұрын
Thank I guess lol. Point of this video is to show what NEEDS to be done at minimum if you want to mob this thing without worry. We are far from done!
@youngblood214 күн бұрын
There's no way I would treat my brand new truck that way!!!
@zenhomeessentials1200Ай бұрын
Mate where to get the ford performance parts? I live in the UAE, is it possible for you to courier them here, couldn't find the parts online on ford's website.
@CAT3616G2 ай бұрын
Better bulletproof that transmission 😅
@manuelgarcia9790Ай бұрын
I’m willing to do it and work the overtime here at the plant so the wife isn’t in my ear about the cost.
@romanmcdonaldАй бұрын
Is this build dead now?
@casper24ismАй бұрын
Lol this is a waste of money.most people would never need all this and this stuff breaks too.plus welds break in other spots.if you beat it that hard.