Brother it was not an a stupid experiment it was a worth experiment for the electrical and electronic technicians and engineers.

No such thing as a stupid experiment in my view. Thanks buddy.

Thanks for sharing. You have lost 2 inverters for us! Thanks man! Hopefully, subscription will compensate that!

This is not stupid this experiment worth millions, you lost 2 inverter for us, Thank you for this & Please if you can make a tutorial about synchronization of two inverters

Man your experiment is great to learn from! thanks guy.

Thank you bro..You are awesome, many of us will try if not for you. Very much appreciate your Experiment 👍

Thanks bro, I learned a lot as a technician

Try turning them on one by one first with a 100watt resistor in series on one of the wires , interesting experiment ,,a great sacrifice for scientific community watching it .

I've always wondered what would happen. 😅 good job. Just maybe next time set the switch/breaker a bit further from the inverters. Haha.

It was a great experiment bro

Now please do a video where you do just like what you said: synchronize them; OPEN them up,modify them ,one master one slave, so that both outputs are in sync,then put the lamp BETWEEN them, in series,and if the lamp does NOT light (no current flowing),then hook them up; better with a dual trace oscilloscope...we'd love to see that.

Wow you share it very clear.hope yotube will pay your verry nice expirement brother

thanks for your sacrifice bro.. worth it experiment

LOL, that was what I expected to happen but never had the courage to do it myself! thanks bro

Thanks to your Experiment...

Omor, it's not a stupid experiment. Thanks for this 👍👍

Thanks for taking it for the team, 😜

terima ksaih banyak Bang sudah mencoba ekperimen ini, dan manfaat untuk orang lain adalah agar jangan melakukan hal yg sama ..... dan akan fal akibatnya. trima kasih semoga sharenya banyak manfaatnya.

tbh, I expect some explosion hehe. nice demo!

Wait for your vedio

thanks man!!! I had been searching for this for a long time

Thank you for this experiment i learn a lot.

Thank you. It was nice to see, now i will never forget.

Thanks for that experiment, Am so sorry for that damage

Lol 😂 oh really you lucky caught on fire 🔥

Thank you saved me 2 inverters new subscriber.

I always wonder and I was to afraid to do it my self thank for video

Nice experiment bro.unfortunately for two power inverter.this also can give me knowledge.thank you.

Thank you for experimenting

Thanks Bro for good experiment.

Very good 👍🏼👍🏼👍🏼👍🏼 didn't need to experience that wow

yeah... this really didn't need that experiment.... but funny to see!

I wonder for a long time. Thanks a lot for your sacrificing. Let’s see the solution.

Salute you tought mi some sence I wanted to try

Thanks I learned a lot from it

Great bro

Great work at least we see the output

Thank you, this is very helpful.

You successfully converted one inverter into a bird bell 🎉🎉🎉🎉

Thanks for the experiment

You are genius bro 😂

Good job

Good R&D

Thank you though; It is a good to know and sure it was not easy to lose two inverters !

🤣 that awesome

Could you set them up like you would parallel a generator plug parallel cables plug and turn on one inverter and the turn on the second one. Woul that sync them? Not have them on before you connect them but after. When paralleling generators you don’t fire them both up and then connect them together

But we can parallel connect the 2 inverters to one source of battery to atleast distribute the loads to both inverters?

OK. Now do synchronisation project thanks

You saved my life

You saved me from killing my invertor. ✌👊

Nice

masak o inverter..mahal pulak tu🤣

Nice i try to in my inverter

yeah booth inverters start working as referse inverters :P and that probably burnt tcoils and mofsets makes sense. so probably we need to disable one of the control signals and use only one of mofset drivers circuits instead ... ie copy /paralel connections from one mofsets gate plus and negative signals to other. so signals will be in sync. and probably even on alternate side polarities needs to be checked. as for mofsets its polarity switching circuit which means they are actually still dc on input and output. if you consider 50hz timings

Hi there this is not a stupid video I see you've got about at 81 comments you've taught us what not to do,cuz I was about to do it with 2-ups thanks yor

Budget Electroboom over here...

How can we success among two inveerter synchronization

U helped many others

You are genuine thanks

First of all thank you for the experiment .but wait a minute what about positive to one inverter and common shared to both inverters for your power into the inverters and then use your sync harness .do you think it's a possibility?can you share a sync video with us on how to master slave ???????

Good inspiration . For this experiment , conclusion is strong old will burn out the weaker one. either one will death. what if we make them in phase?

Not stupid. We are all learning. Thanks.

@wajaeboseben AGS TECH Thoes inverters can be joined together but you have to do it from the inside👍

so how do you synchronize two inverters of same frequency and same voltage?

Well thanks bro

Enjoyed it

Thank you your the sacrifice

Thx for this exanmple how not to do things. i have 2 cheap 150 watts and was wondering if one could ac in parrallel. I guess only if the wave forms are synced. Now i am sure never to try this 😀

I would expect to see this video on ElectroBoom channel.

I bought a vevor inverter very expensive and should do 3kw peak 6kw. I used it alone not with another and used max 600w on it and after a month smoke came out and it was on fire. Would like to build my own or use a lot of cheap ones say 150w ones to make a string to make up the lot. Anyone has any ideas on how to do this without blowing it?

thanls I learned a lot from it 🥰🥰

Thank you!

Thanks i am wondering what will happend😅

Are you sure Phase and Neutral each inverter connection?I did not see using tester that phase or Neutral.

Can you try a gridtie to a offgrid inverter?

God bless you !

no, you should have done it in series on the dc side

You are crazy Man

Not only do you have dead inverters, but apparently you're missing the left and right hand sides of your video camera as well.

Thanks I was about to try the same 🤦‍♂️

😄😄😄😄

How to syncronize 2 inverter ?

They weren't in phase, obviously, so you got an overload.

Thank you so much 😢

I will do thumbs up for you

I see red and black wires and wondering - are you ElectroBoom YT channel, or what? :D If you'd not reverse the polarity, maybe it would not blow ;). I'd say for sure would not blow.

At least you should check positive and neutral side of both

can you do a video about parallel offgrid and grid tie inverter?

many thanks, not stupid, breaking things is good

So what happened?Why did it blow?

Would it make any difference if you powered one, then connect, then power the second? I am fairly sure they need to be "syncable", i.e. smart enough to look for and sync to a sine wave. Thats how you are supposed to sync portable inverter generators, but definitely no expert. It was fun to see the magic smoke though!

😂

What you can do is: Open both the inverters. Connect the DC side 300V capacitors of both the inverters in parallel and you're done

Do it series connection on dc section, not parallel on ac side

wow, fried it!!!

You let out all the smoke. When that happens the devices quit working.

Very stink indeed. Thank you for showing this to us

thank You Bro! sorry abot that..

I thought it will increase current 😂

The views did not even compensate the lost money. Time spend on illustrations could have more cost effective and safe. It's not an stupid experiment, but not very educational either because not all audience really understood what actually happened. Wish you best with content making bro