No video
How to plumb a Hudson float valve to your buffer tank- Pressure Washer Plumbing
Рет қаралды 7,226
Күн бұрынHow to plumb a Hudson float valve to your pressure washing buffer tank.
#pressurewashing #softwashing
@noahkustrin2322 Жыл бұрын
Dude this was so helpful. Thank you.
@ExpertPowerWash Жыл бұрын
Thank you
@TheFreshRinse 11 ай бұрын
Thank you for the video. I posted it to the WashTube University page. Question: Do you find that running the fill hose through the reel causes restriction?
@ExpertPowerWash 11 ай бұрын
I’ve honestly done it both ways. I’m sure there is an argument that you lose flow but the efficiency wins for me. To me the difference was not noticeable. Slow flow at a house is slow flow. Running it direct won’t improve that. I’ve even ran the 1 in manifold reels. The fittings on those with being so large kinks the hose. This is working for now.
@TheFreshRinse 11 ай бұрын
@@ExpertPowerWash I like that. Thank you. Without going to any trouble, can you share what fill hose you recommend?
@ExpertPowerWash 11 ай бұрын
@@TheFreshRinse currently liking the 3/4 Flexzilla. I did see at the convention that Bluebird sells 3/4 hose that is light. I ordered two of them and it looks really good. It might even rival Flexzilla. I’m excited to try it.
@truthseeker1532 2 жыл бұрын
Great video. Where is the best source for that crush-proof hose? Do you know it’s exact name? (Sorry, you just said that right after I asked 😃)
@ExpertPowerWash 2 жыл бұрын
In the video but Manatee has it. Call Jared and he will hook you up.
@mlhm5 Жыл бұрын
Where is your filter? I would have it before the water goes into the tank especially if you are pulling water from a well.
@ExpertPowerWash Жыл бұрын
We don’t set it up like that but nothing wrong with doing that way. Our guys run the water for 5 or seconds before hooking up the hose.
@herreraspressurewashing4664 2 жыл бұрын
I’m just starting out but when you drill the hole do you clean the debris inside the tank? Like with a vacuum? Thanks for the video
@ExpertPowerWash 2 жыл бұрын
Yes shop vac or you will have major problems.
@dustinjohnson2116 5 ай бұрын
@@ExpertPowerWash what size hole saw bit?
@dustinjohnson2116 5 ай бұрын
What size is the hole saw bit that you used?
@ExpertPowerWash 5 ай бұрын
There’s all different sizes. Depends on your bulkhead. Google search “bulkhead hole saw size” there should be a chart with all that information.
@577buttfan Жыл бұрын
What's the best supplier of fittings
@ExpertPowerWash Жыл бұрын
Lots. Grainger is decent to deal with. Us plastics is another good one.
@577buttfan Жыл бұрын
@@ExpertPowerWash thanks brother!!
@akbuilder7626 8 ай бұрын
Buy a jobe valve instead.
@ExpertPowerWash 8 ай бұрын
We use both. Love the Jobe valve
Fabiosa Best Lifehacks
Рет қаралды 20 МЛН
Expert Power Wash
Рет қаралды 30 М.