Explorer ST FenFab Cold Side Charge Pipe With BOV Install

Рет қаралды 3,712

3 ай бұрын

In this video we install fenfabs cold side charge pipe with an HKS BOV, it’s pretty simple and straight forward. Not to mention helps with the flow as it’s not S shaped like the factory pipe. And just listen to the HKS BOV 🥵 as always I really hope this video is helpful. Thank you all so much for the support and love and if you would like to get one yourself you can visit my website
HoustonSpeedFreaks.com

Пікірлер: 49

@OhThatsJustGoob 2 ай бұрын

I did the same for the hardline, cut a small slit. I do always make it a habit to zip tie all vacuum lines.

@HoustonSpeedFreaks 2 ай бұрын

My man!!💪

@WhizzyWhig 3 ай бұрын

You can always count on Brett - Those extra inches come in clutch!

@HoustonSpeedFreaks 3 ай бұрын

Always giving out the free inches huh 😂

@jonathanirizarry3246 Ай бұрын

Do you have a link ?

@CornFed_3 3 ай бұрын

This man whispered to us saying he’s got some stuff he can’t talk about 😭😭😭 I love that this platform is coming along. I actually just ordered a full set of LEDs from you yesterday. Can’t wait to get them!

@HoustonSpeedFreaks 3 ай бұрын

😂😂😂 can’t share everything yet 😅 me too I absolutely love this platform😁

@HoustonSpeedFreaks 3 ай бұрын

I appreciate your support man I’ll have them coming your way tomorrow 😁

@CornFed_3 3 ай бұрын

@@HoustonSpeedFreaks, sounds like a plan, I appreciate it! I know there’s a lot in development right now for these. I’ve been holding off on doing a lot to my ‘22 and just doing a lot of stuff at once. Do you know if Brett does custom colors for powder coating on his pipes?

@michelleocasio1034 2 ай бұрын

Hi.. I enter into FenFan page.. My fiance has am Explorer ST early 2022 and have doubt in which option choose.. beacuase has many..

@HoustonSpeedFreaks 2 ай бұрын

@michelleocasio1034 you would choose the 2021 late model and up and whatever blow off valve you wanted😁

@ricshuttleworth1609 3 ай бұрын

Snap Ring pliers are a good thing.

@HoustonSpeedFreaks 3 ай бұрын

I agree I need to get me a back up pair I always misplace them as I don’t use them all that often lol

@Pawe70zga 2 ай бұрын

I have the 2020 so i just added the spacer and its a rice mode fully engaged

@HoustonSpeedFreaks 2 ай бұрын

You aren’t lying I love it though 😂

@90brandon86 22 сағат бұрын

I was kinda mad I got a the s&b cold air intake but it didn’t come with the some special tool to take off the crank case hose. So I went to do my blow of valve and there was not a bov it the factory located. Was kinda disappointed wanted to make it flow more. I already did the exhaust

@HoustonSpeedFreaks 22 сағат бұрын

You don’t need a factory BOV to add the one I added here.

@ZNP25 27 күн бұрын

I’d assume they took it off so they had the computer deal with decompression. Wouldn’t we need a tune to tell the car it now has a bov? Fully commenting this without watching the entire video in case this was answered. 😅

@HoustonSpeedFreaks 27 күн бұрын

Nah bovs aren’t always necessary honestly, all you’re doing is venting excess pressure.

@colinboyle7937 15 күн бұрын

Love your channel, helps a lot being a new ST/new to turbo cars owner. Mine is a '21. Other videos I saw showed the OEM BOV under the air box. What additional steps would I need to make mine like what you installed here?? TIA

@HoustonSpeedFreaks 14 күн бұрын

Depends on when in 21 yours was made… 21 was a split year so some came with an oem bov and others didn’t. The only additional steps would be to reach down unplug the one BOV and wire in the resistor he includes in the package 😁

@Tactical_OG 3 ай бұрын

Im literally going back and forth on this right now lol

@HoustonSpeedFreaks 3 ай бұрын

Do it! Lol

@solidoustopher 3 ай бұрын

I bought the tial kit and I don’t think I’ve ever heard it go off. Really pisses me off that I spent money on it. 😢

@HoustonSpeedFreaks 3 ай бұрын

Factory location?

@sandcrab70 7 күн бұрын

Man love that stance the ST has at 0:56 I just watched the wheel and tire set up but by chance what lowering springs are you running?

@HoustonSpeedFreaks 7 күн бұрын

I’m on Ebaich lowering springs and run a 20x10 with a +25 offset wheel, tires are a 295/45/20

@sandcrab70 7 күн бұрын

@@HoustonSpeedFreaks how is the clearance with them(going up slanted driveways, speedbumps, etc)? I’ve been reading and see ppl mention that they actually sit lower than advertised. No rubbing with that tire set up either?

@HoustonSpeedFreaks 7 күн бұрын

@sandcrab70 I don’t rub at all and I don’t scrap on anything but mind you I’ve had low cars and some slammed cars so naturally it’s how I drive the explorer as well.

@sandcrab70 7 күн бұрын

@@HoustonSpeedFreaks awesome good to know! Really appreciate you taking your time to write back!

@HoustonSpeedFreaks 7 күн бұрын

@sandcrab70 anytime brother 😁

@gumbee9911 Ай бұрын

Ok and the HKS valve?

@HoustonSpeedFreaks Ай бұрын

Yes it’s all on Houstonspeedfreaks.com You can even email me at houstonspeedfreaks@gmail.com and I can send you the invoice for exactly what you see in this video 😁

@GrgBuiltCoyote 3 ай бұрын

Yo, why’s is the Honda Accord facing the other way?

@HoustonSpeedFreaks 3 ай бұрын

I hate you 😂

@matthewpieper7202 2 ай бұрын

What size clamps would you recommend I use for the hoses?

@HoustonSpeedFreaks 14 күн бұрын

I would think 1/2 inch clamps would work just fine.

@gumbee9911 Ай бұрын

where did you buy the pipe?

@HoustonSpeedFreaks Ай бұрын

Houstonspeedfreaks.com

@gumbee9911 Ай бұрын

Hi, where did you get the tube and valve?

@HoustonSpeedFreaks Ай бұрын

Houstonspeedfreaks.com😁

@gumbee9911 Ай бұрын

I need to know where you bought the white tube?

@HoustonSpeedFreaks Ай бұрын

I bought it from HoustonSpeedFreaks.com It’s made by fenfab

@dgonzo512 Ай бұрын

Do you still have your jlt catch can installed?

@HoustonSpeedFreaks Ай бұрын

Yes I sure do still have it

@cjennings4936 2 ай бұрын

What CAI are you running?

@HoustonSpeedFreaks 2 ай бұрын

S&B 🫡

@brad378 2 ай бұрын

The camera work is making me dizzy 😵 Grab a tripod bro.

@HoustonSpeedFreaks 2 ай бұрын

This one I messed up while filming, I accidentally recorded a majority of it the wrong way so had to zoom in to get it to fit KZfaq format