Рет қаралды 4,422
VIEW PRODUCT HERE:
dashskin.com/95-96-gm-truck#143=
Vehicle Compatibility:
95-96 C1500, C2500, C3500 Trucks
95-96 K1500, K2500, K3500 Trucks
95-96 Tahoe, Suburban, Yukon
OBS TRUCKS WITH CUPHOLDERS ON PASSENGER SIDE
linktr.ee/dashskin
95-96 Chevy/GMC trucks are some of the best vehicles GM ever made, but they're sure to come with cracked and dilapidated dashboards after 25+ years! DashSkin molded dash covers install right over the top of your existing dash using the included silicone adhesive in minutes, and are guaranteed for life never to crack, warp or fail. The covers are textured to match and offered in factory colors, so passengers won't notice an overlay is installed.
INSTALLATION: The passenger side cupholder insert will need to be removed prior to installing the cover, and re-installs over the installed skin for a super-factory look. The driver's side Fuse door also gets removed and re-installed over the cover for easy access. If you have cracks or holes you will be covering, we advise cleaning your original dashboard well with degreaser, and applying extra silicone adhesive into any cracks and outlining any holes to prevent further cracking or rattling. This way when you install the cover, all of the cracks will be securely glued to the underside of the skin to add strength.
#Dashskin #chevrolet #k1500 #c1500 #c2500 #c3500 #Suburban #Tahoe #Yukon #GMC #CRACKDASH #automotive #dashrepair #dashcover #easyfix #howto #businessinsider #learnmore #howtoinstall #installguide #guide #manual #tip #autotips #installvideo #diy
00:00 Intro
00:27 Cracked Dash
00:38 How to locate SPID and compare it to our Trim Code Guide
00:48 Key Points of Failure on your OEM Dash
01:20 Removing the cup holder insert above passenger glove compartment
01:55 Remove Fuse Panel on the Driver Side
02:05 Pop the Bezel loose for Install
02:43 Remove Defrost Bolts with a 7mm Socket Wrench
03:25 Cleaning & Prepping your Dash
04:57 Dry Fitting your DashSkin™ over existing dash
06:00 Apply Glue on Cracks
07:10 Applying Glue to the underside of DashSkin™
08:46 Installing DashSkin™ over existing dash
09:30 PRO TIP: Adding Small O-Rings to ScrewBolt
10:03 Re-Install 3 Bolts in the Defrost portion of the Dash
10:46 Replace Fuse Panel Cover back by the Driver Side
10:55 Re-Install Cup Holder Insert
11:05 Fold Cardboard and place it between windshield
11:27 Apply Weights
12:39 Adding Prop Rods to Front Surfaces
13:07 Closing rags between door and side of dash
13:45 Final install
linktr.ee/dashskin