Well done! This was very informative and makes me look forward to processing my gold plate stockpile. I have just over 3600g of fully plated material just like what you saved up 🙌🏼🙌🏼 Bravo and well done!! 🍺🍺🫶🏼

I don't know shit about mixing chemicals or anything like that but i enjoyed watching your process.🤙🏽🍻

Always enjoy your videos. Thank you again and looking forward to more.

Awesome ! subscribed .. and thanks for being here.

Thank You for the information.👍

First time doing this I wonder ?? 😮 I liked it very educational..

Shiny shiny gold bar!

That was some pretty good scrap !

wow amazing my friend, very good video thank you for sharing the video my friend.🤝👍🇮🇩❤️🔔🔔👈👈

Thanks for the awesome video

Good job. Nice and clean

انت مبدع

Estoi aprendiendo mucho de su material audiovisual estpi recolectando material saludos desde Gran Canaria,

Man You cracked me up on in between the 2nd and 3rd attempt with the punch... That growl..LOL Preesh! And good job.

Видео супер! Произношение на английском явно советской школы!

Very nice bar

All through Covid Lockdown I was collected computer hard drives, memory, processors, graphic cards, circuit boards and motherboards. I tore down 2800 hard drives I depopulated 159 motherboards and have 26 pounds of memory sticks and flash drives. 190 pounds of processors.

Hello Mr AK. I love your clip. Thank you😊 Arne. Norway

Bear 😎👍👍

thanks for video of gold recovery from electronic waste, awaiting another video for tv's pcb that you said on the above video

хорошо учили раньше, видно, что человек не прогуливал уроки химии...

Excellent video bro 👍

wooow hi there, you just showed up in my FYP and love great job and you got 1 more sub from me ;) regards from sweden

Great vid bear!!

Good video and Information 👍

Very funny video was even funnier when your aqua regia was a black-green colour I almost laughed

Well done enjoyed 😊

I really liked your technique of adding water and sulfuric and Nitric right at the beginning. Can you tell me how much the bucket weighed? How much gold did you process? The bucket and the gold together was 3327 grams? Great video! I am guessing 156 grams for the bucket.

👏🏾👏🏾👏🏾👏🏾👏🏾👍🏾 Very good

Да твоё произношение, не подумай плохого , сразу слышно такой типичный руский , акцент 😅🧐👌👍

can you tell us what gold-plated resistors you had in bucket.Thanks

When one was blue amd one green, the solutions, one had palladium or platinum while the other didnt.. about 5:30 minutes in, at least, yhats what another channel said, "sreetips"

Gives great Ideas

Hi really enjoyed the video. What concentration are the nitric, sulphuric and hydrochloric acids that you use? Would you recommend this method for ceramic cpu processors or do you think nitric acid would be enough to lift the gold away from them? Seems like using sulfuric and nitric together speeds things up which would be good for me. Don’t want to wait a week for nitric acid to do it’s thing like a lot of people suggest. Thanks in advance 👍🏻

Good work bless bto

Different, but enjoyable

Have you tested the purity of your bar with a sigma metalytics pro after you finish making your gold bar? You should make an e-book or video course on all this, you explain it better than others

listen to the boss,,,,, don't forget to stop by for black coffee together... goes duit and goes natural so that you will increase your enthusiasm for work and add brothers thank you very much

Wow nice

That was a lot of material. That was a lot of Gold! Great work. New sub. Do you use a stock pot?

Good show

Your gold looks amazing. From this gold i can make beautiful earrings 👩‍🦰

we had over 300 old telephone rack circuit boards..used chemicals that scared the crap outa me.took us a week. there was a lot of waste only got 6 frams..this was 15 years ago. I knew there had to be an easier way..thanks

I found out that Gold recovery from old computer parts and TV 's and I ordered the acid and a couple of the chunks of computer pins with Gold and I got just a little bit of gold from it. It was an interesting experiment but I don't think that I would like using the acid all the time because of the smell and the nosey neighbors who ( think ) I have a lot of Gold hidden.

do you know when your going to have more Sulphate IN stock ?

Хорошие видео

U obviously have an unlimited supply of acids 😮

were you find nitric acid ? i donth have any nitric,and i have abaut 6 kg gold plate pins ?

What about the platinum and palladium??? Next from waste solution??

Excellent video. I learned a lot about the process. How much cost for all the acid and meterials for this batch?

What do you think about use magnesium for precipitate? Its extremely cheap reactive material so could be nice too but im not sure

Cool

Do you need to use ferro first to neutralize it with urea master? Boil it using HCL, doesn't it affect the gold powder?

where you from bro? good job man. where you living now ?

Trying to learn, but I don’t know all the acids can you use drain opener and lie to recover gold

Привет. Мне кажется это жуть как вредно для здоровья.

LOTS OF WORK!! but worth it, in 2023 2024 horrible expensive, society, to live in

Salve. Ti seguo dall Italia ma cercavo un tuo vecchio video e mi sono accorto che non ci sono più molti vecchi video! Come mai?

Было бы интересно посмотреть где вы берете материал для аффинажа

Can you please tell me the weight of all the scrap before refining it? Also where do you get all these supplies from?

These are the videos that will grow your channel. Show us where the gold is, in vintage electronics and crt TV's. You have the knowledge already, your channel will grow infinitely if you continue to teach us. Continue to put content out, that shows us where the gold and platinum/palladium is in electronics. You are the master, you know exactly what pieces contain the precious metals. Your channel will explode with subscribers if you teach us where it's located in older electronics. It's your gift to teach, to share. Your reward will be subscribers waiting for your next video.

Dear friend and teacher How do you eliminate the acids before you throw away? I mean, what do I need to put inside that will stop their action so I can throw up in the toilet..? And if you could make a video for it that would be wonderful 😊 Thank you😊🙏🙏🙏very appreciate

Wouldn't it be easier, less cost to smelt just after getting all the gold flakes realeased ? What do you do with the toxic chemicals afterwards ?

Can i disolve magnetic pins with Cu2Cl ? Copperchloride?

Where did you get the acid from

I'd be curious to know if you took the time to calculated how much time and effort it took you over time to reclaim 100's of electronic devices to accumulate that bucket of scrap because time is money. Add cost of various amounts of acid and then add time to extract gold over three days time. Subtract your asking price of $1,500 for the bar and see if it's really worth it. In actuality that bar melt value is only $1,309.48 at todays market price 8/13/23

Double die obverse! It’s worth more now 😂

wow

Русский акцент )))😅

on 6 kg gold plate pins its work salt electrolisis ?

First, you have all the time collecting components , tearing them down to the gold-bearing items. Second, you have all the costs of acids to extract the gold. After you take your labor and supply costs you are definitely losing money by producing only 21 g. You would be better off finding a river and panning for gold, which has little to no cost and you're out in the fresh air.

Just wash the gold sedimen with HCL, dont boil it. When u boil hcl it will disolfe some of your gold again.

In which temperature?

I would definitely say you’d put gold back into solution at least once if not a couple more times when you did you hcl boil as well as nitric boil. I always recommend a stannous test. That would show if you’re putting gold into solution or not, or if it was just palladium in the hcl boils. Chances are you didn’t rinse the HCL well enough before the nitric boils. I would recommend at the least to incinerate your materials after the hcl boil/rinses and even better, in between refines to get more purity. That will prevent any excess nitric from creating agua Regia or excess hcl when switching to nitric. Great video though! Thank you!

Nice color. No towel under your pedestal to avoid the bounce you are getting. I would have liked to seen a more detailed view of the materials before start of processing.

Absolutely never do this without a fume hood system (if indoors)

Услышал ай яй🤔😂

Ola .mi neymes is nival im from Brasil you cam .me passar informação como se faz isso .gostaria muito de aprender a fazer esse processo. Tanks

Can you olease test the solotion after each hydrochloric boils beceause there might be Some gold in solotion after the boils iT wil disolve the gold

Please, use some safety goggles, even if you don’t care, the youngsters who will imitate your procedure may get a tiny “splat” H2So4 in their eyes get blind.

Very interesting process. I am curious though about the economic side of this (as in, the cost of the bucket of scrap, cost of acid, monetary value of end product, etc.). Is it just a nice hobby, or can you actually make a living of this?

Слушай ты по русски говори а-то твой акцент тебя выдаёт 🤣🤣🤣🤣🤣🤣🤣

The real question is how did you remove all that gold plating from cicuit boards 😅

A fórmula.

What happened to your video, ""extracting memory RAM IC chips" " ?

Сразу слышно Русский акцент 😂

Are you copying Sreetips...??? 🙂

You needed to filter those solids out at least another couple of times. The solution was nowhere near clear.. You also didnt remove the excess presence of iron and such before adding the iron sulfate.. Also, the fact you were not checking for gold in solution with stannous tests means you could have potentially lost some gold into your waste bucket. That gold could be a lot purer if you start the process over again. Anyway, wtf do I know, nice work getting that gold, thats a lot of work right there!

As someone that repairs electronics, this had me shaking my head. Do you have any idea how much more gold you could just buy if you repaired electronics and sold them? You waste so much of your time.

ruzz ? block

Was it worth it? Everything I'm going to do is basic addition subtraction and multiplication and division but it is applied math. If you can apply the simplest math formulas you know a lot more than most people. 21.2 grams of gold x $62.877 (round up to $63) = $1335.60. Not bad Gold wholesaler will purchase for 50-90% (they need to make money too). Let's pick 85%. $1335.60 x 0.85 = $1135.26. Not bad. 1 gallon of lab grade sulfuric acid with hazmat shipping and taxes $110-140. Let's say $110. $1135.26-$110=$1025.26 And another $100 for the nitric acid and if we're subtract that we're at $925.26 Let's give a conservative estimate of gas spent driving around to get this $25 and another $25 on lab supplies, $875.26 I assume you spent more on gas driving around and gathering things for a long time and getting supplies. I assume your supplies cost more than $25 but let's be conservative. I also assume you spent way more than 40 hours gathering everything, being apart electronics and extracting the gold but let's say you didn't. $875.26/40=$21.88 an hour. I worked at USPS for $23 an hour. I worked at the airport for $21 an hour. So many people think that by extracting good they're going to get filthy rich. You never said that but many people believe that. Is it worth?

нихрена сказочник....? из телевизоров столько зла ....гари потэр,что тут скажешь...

Are you русский?

Bzdury walisz gdzie w TV są takie piny i tyle 🤣

👍

£1000 not bad for today prices😁🫡