Extreme BMX Repair Using the WRONG TOOLS!‼️🤯 #bmx #bikes #youtube

Рет қаралды 24,201,557

Ай бұрын

Watch along as we push our BMX workshop skills to the limit.. With this Extreme BMX rear wheel revival inside the skatepark! 🚀🔥 Without the correct equipment, we’ve used our imagination & BMX restoration mastery to turn this worn out wheel into a special custom front wheel! 🤩♻️
.
Follow us 👉 @t77bmx 👈 RIGHT NOW!‼️ So you don’t miss our next Extreme BMX rescue mission!

Пікірлер: 1 551

@Malleluxusgirllarissa Ай бұрын

Ah you made a front wheel from a rear wheel! Great idea

@oakzy3647 Ай бұрын

He’s tuning it

@user-gy1ej9tq7h Ай бұрын

可以翻译吗

@cora777x Ай бұрын

😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

@marcelodonascimento920 Ай бұрын

❤❤❤❤❤❤

@almudhorry2029 Ай бұрын

@@user-gy1ej9tq7hah kau membuat roda belakang menjadi roda depan.

@Perryprime1999 Ай бұрын

Chilling under the ramp at a skatepark while its raining is a vibe

@chriscarr1787 Ай бұрын

Or not well😢😢😢😢😢😢😢😢

@Christopher-ko9op Ай бұрын

Yeah it is. The rain, the wind, the cold but you're in a little pocket of shelter. The feel of the cold steel, the sound. I can imagine it.

@reeNeey_ Ай бұрын

@@Christopher-ko9opperfectly described. While reading this, I was sent back to the very old skating days ❤️

@goodhouse91021 Ай бұрын

And probably sitting in piss 😅😅

@Christopher-ko9op Ай бұрын

@@goodhouse91021 lol don't ruin it!

@iDontReplyToComments Ай бұрын

“Mum that strange man’s under the ramps again”

@T77BMX Ай бұрын

Hahaha 🤣

@eliteculture1519 Ай бұрын

Keeps the park cleared though 😂😂

@Yut00bisSUS Ай бұрын

Bro reinvented the wheel.

@bradleyhorn4249 Ай бұрын

Underrated comment

@patrickmcgillicuddy9227 28 күн бұрын

Damn I thought the same kudos

@CruisinCaprice 28 күн бұрын

Retuned the wheel more like it

@user-hc9sk3mg1h 27 күн бұрын

A shit vibe 😂

@Headtoppaman1989 27 күн бұрын

Not really... wheel builds are a pretty common thing...

@paulmartinez7794 Ай бұрын

I was feeling like I was dumb, but then I saw this short and it made me feel better.

@David27mk 26 күн бұрын

very good 😂

@ninjamigs1766 26 күн бұрын

😅

@mirza6399 25 күн бұрын

why ??

@taylortorres3769 24 күн бұрын

@@mirza6399 because he turned a back wheel into a front wheel

@jeffkrantz9916 22 күн бұрын

😁💯👍😆

@aileendimakiling3834 Ай бұрын

Yeah that alignment was accurate as hell😂

@chris22186 Ай бұрын

The patience you have to have to to true a wheel is insane.

@user-zr4un6tk8b Ай бұрын

Yes I am a dirt bike rider and grew up working on them. One job I will never ever do again is respoking a rim. Fk that I just buy new rims when I need them

@immabadelmo4969 Ай бұрын

Used to work in a small town hardware store shop that did a little bit of everything, this was one of, if not my least favorite things we'd fix lmao. Soooo time consuming

@richardlea818 Ай бұрын

We used to just use the brake pads to gauge them. I think it took me around 3 hours to lace and tru a wheel

@CapUnlimited Ай бұрын

I was thinking the same thing

@bmxrider71 Ай бұрын

I actually love building wheels. Best I've done is on my Hyper and i built both in about an hour and a half start to finish.

@tee6519 Ай бұрын

I can't lace a.rim in my house let alone ina park in the rain with wrong tools😂

@user-jr1ki4ee7q Ай бұрын

I was gonna say very, very good, although I’m just gonna keep it positive very good very good content very good content you Musta had a good father or a good guardian to show you some stuff about mechanical

@conorharford5117 Ай бұрын

Me too. i have one sitting in my front room for months

@Eddi3xBac0n Ай бұрын

trial and error. practice makes perfect

@user-dd2yz3yu2q Ай бұрын

This and 10 speeds is the worst of bike building

@tonberdy9806 Ай бұрын

@@conorharford5117pppp😊ppp😊pp😊pppppppppppppppppppppp😊ppppppp😊p😊😊pppppppppppppp

@ivashkevich Ай бұрын

Гений. Ломал заднее, устанавливает переднее.

@T77BMX Ай бұрын

Yes! We needed a front wheel and this rear Rim was in perfectly good condition, so we recycled it! ♻️

@Vlada_Taran 6 күн бұрын

🤣🤣🤣

@Pushbikesteve Ай бұрын

This the kinda sheet I been doing my whole life man 😂😂😂 I appreciate this video 😂🤙

@saplndor2320 Ай бұрын

before vs before😆

@alphaomegazulu8451 Ай бұрын

Only a real rider can do this. Back in the day we’d take our bikes apart every morning and tune everything up. Awesome 🤘

@fotis3v480 29 күн бұрын

Yeh you tune your sit heights.😂 It's a bmx about the only things changing is seat height and tire pressure.

@69TheSuperbad 28 күн бұрын

@@fotis3v480 get fuckin' rekt. You just got boomersplained to. Love you both, much love and respect. Hopefully you both can resolve your differences respectfully.

@taylortorres3769 24 күн бұрын

He literally turned a back wheel into a front wheel. He’s got 2 front wheels now

@Jeff-dq3bj Ай бұрын

When u feel dumb, just remember this guy exists

@CXVI2 Ай бұрын

try doing this urself bucko

@Text-SpeechStories Ай бұрын

Look at the caption first

@yikes6969 Ай бұрын

Useless comment

@LoneWolfHustle Ай бұрын

😂😂😂😂

@AngryChair6 Ай бұрын

What did he do wrong?

@Dirtdaredevil Ай бұрын

chops back wheel. but back wheel is there when he is under the thing, then puts in a new front wheel?

@jopequi Ай бұрын

Creo q es para poder centrar la rueda, puede utilizar el trinche como guía

@Ferrari255GTO Ай бұрын

@@jopequi weon lo que dice es que despues de cortar la llanta trasera, monta una delantera pero al montar la delantera hay una trasera montada

@elite_riddimzgaming3427 Ай бұрын

@Ferrari255GTO cutting rear spokes, a wheel is complete.....made up of a tyre (the rubber bit) a rim (the metal bit the tyre sits on) spokes and a hub (the centre piece in question). Can confirm he never cut a tyre. Yes he did mount a rim that was on a rear hub to a front hub, probably bought a new rear complete then used the old one as its a sqaured edge rim....most g sport or skylark front rim's have a rounded edge....he wanted matching wheels not one rounded one squared in a set

@Ferrari255GTO Ай бұрын

@@elite_riddimzgaming3427 yes, i know what both spokes and spoke nipples are, i was generalizing. Also llanta is Rim, not tyre, tyre would be Neumatico o Cubierta

@benjammin893 Ай бұрын

yep. you're exactly right. it's a total setup oopsie video

@pashasabelnikov7161 Ай бұрын

Наши руки не для скуки, Работа, ради работы. Продолжаем в том же духе.

@T77BMX Ай бұрын

We made a NEW front wheel for someone to ride down the skatepark! Glad you enjoyed the content

@bawz1773 Ай бұрын

qeq

@gangnygny4535 28 күн бұрын

ему бы в армию бордюры красить

@elparpo9 Ай бұрын

Video ended when he found out how difficult is to true spokes by eye

@T77BMX Ай бұрын

Hahaa! 😅 Yes we actually finished it off inside the workshop using the tool. But this method is possible… just very hard like you said!

@elparpo9 Ай бұрын

@@T77BMX good video!, i even adjusted mu wheels some time ago, lateral truing is easy but having a round wheel isnt! haha cheers keep on the good work

@bmxscape 23 күн бұрын

@@T77BMX if you start by threading every nipple just to the point where every t hread is covered, known as "zeroing spoke nipples", every spoke will be evenly threaded and you can then just add 2 turns per spoke at a time going around the wheel until its tight. if it was a good rim to begin with and proper length spokes you will get a true wheel

@TorontoPopulistConservative 18 күн бұрын

@@elparpo9 You've gotta loosen the spokes where the wheel is too flat and tighten the rest, or tighten the spokes where the wheel juts out and loosen the rest. Radial truing is definitely harder than lateral. I would recommend going back and forth between radial and lateral truing for the best results.

@elparpo9 18 күн бұрын

@@TorontoPopulistConservative thanks, and 2 (two) hands full of patience

@Indicasativa55 Ай бұрын

Yeah I’m just gona pop down the bike shop and buy a new wheel

@FrustratedBaboon Ай бұрын

Chicken

@Indicasativa55 Ай бұрын

@@FrustratedBaboon definitely mate but tbf I know if I did it my bike would never work agin

@Tim_On_Line Ай бұрын

В этом теряется весь вайб DIY.....

@Indicasativa55 Ай бұрын

@@Tim_On_Line 🤷

@pablodiablo9178 Ай бұрын

Just happened to have the right length spokes with him but not the right tools 😂

@shanewinslow7285 Ай бұрын

😂😂

@user-eu6cd9pt2z Ай бұрын

No one can truly claim to be a Zen Master, until they've laced a wheel from scratch.

@arvidlikestoast3618 Ай бұрын

My guy snapping those tire rods like it's nothing

@Khercules Ай бұрын

Bro made it look way too easy

@CrypticArtsStudios Ай бұрын

It's called editing....

@jacielopox3692 Ай бұрын

FTP G*59

@yeryehaua9165 Ай бұрын

G59 till the grave

@gaspertolar7950 Ай бұрын

wheel building kinda goes hard ngl

@kmfrnz Ай бұрын

pro in truing dangg!

@private-nobody6667 Ай бұрын

Brought me back in the days when I used to work in a bike shop and one of our specialties was creating wheels from scratch, not an easy job. 😊

@samuelbonaccorso9969 28 күн бұрын

You a real one my guy.

@T77BMX 25 күн бұрын

Thank you my brooo!! thats too kind 👊👊

@wickkjohnn007 Ай бұрын

His patience is unmatched

@user-ji1xc2fu5k Ай бұрын

I'm stuck at step 1. Now doing it to other bikes to gain enough experience for the other steps

@T77BMX Ай бұрын

Ohhh nice!! Haha just the sitting spokes? 🤣🫡👊👊

@DaRemixer1 11 күн бұрын

Wheel building is one of the hardest parts of bicycle maintenance

@T77BMX 9 күн бұрын

YES! I Couldnt agree more! aha 🔥🔥

@Lawyerable Ай бұрын

he attacked that wheel like it owed him money

@T77BMX Ай бұрын

🤣🤣🤣

@shanewinslow7285 Ай бұрын

😂

@elite_riddimzgaming3427 Ай бұрын

Anyone who actually rides knows most g sport and skylark rims that are front mounted have curved walls not squared ( for brake purposes on a rear only brake set up) so he obviously wanted a complete matching wheel set not a curved and sqaured so hes put a squared rim on a front hub so both front and rear wheels match

@shanewinslow7285 Ай бұрын

Now i understand lol ty. My ocd would probably have me do the same... but minus doing it myself 😂

@wf8045 27 күн бұрын

Thank you for explaining. I was confused

@alexzandergolden8765 Ай бұрын

Bro I need a new rear rim u got any old ones u can ship

@elelly1845 Ай бұрын

They're identic There aren't front or rear rim

@Ferrari255GTO Ай бұрын

@@elelly1845 i think he's asking for a full rim not just the ring of the rim, otherwise there'd be no need to specify

@bmxscape 23 күн бұрын

@@Ferrari255GTO point is there is no rear rim, however there are rear hubs and rear wheels. proper terminology is important when dealing with wheels. tire rim spokes hub all together make a wheel.

@user-ns9bw6vs6m 28 күн бұрын

This deserves way more views.

@T77BMX 25 күн бұрын

Thank you so much bro thats awesome!!! 👊👊👊

@chronicmachines6717 27 күн бұрын

No way you did it at the skate park, thats hard core bro 😂😅😊

@T77BMX 25 күн бұрын

Hahaha my guyyy!! thanks brooo much appreciated 👊👊👊

@davidsonnguyen38 Ай бұрын

i honestly never knew you could do this. thanks for the education.

@miltonarroyo7784 26 күн бұрын

My man's went on Straight tweaker status

@T77BMX 25 күн бұрын

HAhahaha 🤣

@underthesonson845 Ай бұрын

I see the truing at the end haha😂😂🙌🏽

@T77BMX Ай бұрын

Haha!! Glad you liked it!

@joshuaade188 21 сағат бұрын

If you can fix a bike , you can join the Royal Navy

@That-Truck-Guy22 26 күн бұрын

I really spoked to see the end result, amazing 👏

@T77BMX 25 күн бұрын

Thanks brooo!! 🤣👊

@q9260 28 күн бұрын

And then you forgot a Torx Screwdriver 😜

@T77BMX 25 күн бұрын

Hahah yes that would be even better brooo!!! 👊

@MatthewJust-nn5zf 19 күн бұрын

The people who made the bike be like 😭

@irishlion5271 28 күн бұрын

Bro demolished his old wheel to construct a new wheel

@T77BMX 25 күн бұрын

haha yep!! the spokes were too rusty they all broke really easy. And the old hub needs a full internal service. But the rim was in perfect condition! thanks bro 👊

@illskilled1 13 күн бұрын

Who knew a homeless man was this skilled?

@T77BMX 9 күн бұрын

Thanks bro! 🔥🔥

@GhostOfficial-0187 Ай бұрын

Bro ain’t no way you finished that shii by eye.😂💯

@juliangonzalez9631 Ай бұрын

Not gonna lie, you had me in the first half😅

@Watergiant95 26 күн бұрын

The unemployed friend on a Tuesday afternoon

@T77BMX 25 күн бұрын

HAhaha. Not quite... But thanks for the comment! 🤣

@Watergiant95 25 күн бұрын

@@T77BMX entirely satire, turned out great and you did something I never knew before.

@sordonic9195 Ай бұрын

The unemployed friend on a Wednesday afternoon lol

@ibeatyoutubecircumventingy6344 28 күн бұрын

Irony being when the wheel wasnt even straight

@T77BMX 25 күн бұрын

hahaha its ok it is now! 👊👊

@TheKrazyinjun 26 күн бұрын

Sheeott, I thought you was going to make a basketball hoop.

@T77BMX 25 күн бұрын

Hahaha!! niiice man, thanks for the comment👊👊

@TheKrazyinjun 25 күн бұрын

@@T77BMX 👊👊

@lockdown2315 26 күн бұрын

This is an influencer that can actually teach you something

@T77BMX 25 күн бұрын

Thanks a lot Bro! 👊👊

@The.Messenger.2832 13 сағат бұрын

Someone should build this guy a workshop so he could earn a living doing this. He's quite skilled at it.

@onelovejl8098 Ай бұрын

Reminds me of my childhood 💯💯💯💯 love it 😊

@T77BMX Ай бұрын

Wiiicked! Thanks for the comment dude we are glad you enjoyed it!

@user-qg6in6xl8p 28 күн бұрын

i remember the days piecing together bmx bikes out of spare parts from others and most the time only using wrong tools working with bare minimum

@T77BMX 25 күн бұрын

Haha yess!! thats what BMX is all about!!👊👊👊

@MtnBadger 28 күн бұрын

Now *THAT'S* "BeSpoke!" 😊

@T77BMX 25 күн бұрын

Waheyyy!! thats an aweosme comment bro! thanks so much 👊👊👊

@Bigrig_trmc 25 күн бұрын

The patients of Kobe to do that all at the park lol I would have forgotten some tool that I need to complete it I’m sure😂

@T77BMX 25 күн бұрын

Hahaha! That’s so true bro I was really stressin that I would forget something 🤣🤣👊👊👊

@checuevas93 Ай бұрын

You know what they say, one man’s skating ramp is another man’s garage. 😅

@patrickmcgillicuddy9227 28 күн бұрын

Bro just reinvented the wheel

@T77BMX 25 күн бұрын

HAhaha thanks broo!! 👊👊👊

@joeaznorth Ай бұрын

Yup. That's how it's done! Watch and learn!

@T77BMX Ай бұрын

You the man!! 🙌🫡

@joeaznorth Ай бұрын

@@T77BMX check out the komatsu pc01 for building jumps. I want 1 so bad

@Vercingetorix46BC Ай бұрын

Didn’t know that shorts can be that long 😂

@T77BMX Ай бұрын

Cheers dude!

@_SemiDeus 29 күн бұрын

switched from water, to H20😂

@fletch989 26 күн бұрын

Now i want to hear a mash up of a track with the sound affects of this video

@T77BMX 25 күн бұрын

Hahaha no Way! that would be hella sick!!! 👊

@REAP.0831 27 күн бұрын

This takes me back to when I use to ride..

@T77BMX 25 күн бұрын

YES!! thats awesome bro thanks for the comment!! 👊👊

@Sctn187 28 күн бұрын

You'd be surprised how few people can work on a bike

@T77BMX 25 күн бұрын

YES! thats so true bro 👊👊

@miahzzeebest701 Ай бұрын

A bike shop would’ve charged me $700 to do that.

@shanewinslow7285 Ай бұрын

God damn 😮

@Wowiieeee3 17 күн бұрын

I was about to say "OMFG WHY WOULD YOU DO THAT TO YOUR WHEELS😭" until i realized.

@dabikerboy 24 күн бұрын

Putting all the spokes in on the same side of the hub is crazy

@mathewdecorse5748 26 күн бұрын

Not a lot of people know how hard it is to respoke a wheel. Color me impressed😅 I threw out so many lightweight GT rims in my day because I had no idea how to do anything with them at all😅

@T77BMX 25 күн бұрын

Hahha niice!! yeah the old school rims were super weak they must have broken every weekend!! Glad you enjoyed the content, thanks for the comment!👊

@mathewdecorse5748 25 күн бұрын

@@T77BMX I had a set of 1987 gt gold rims (idk specifically) but as a 13 yr old I could lift the while GT with a pinky easy, most of it got stolen. Chopped right out of highschool but that ol GT took everything I gave it. Went thru dirt vert canal and street ramps. Ol girl took anything I could give it(unlike my hs gf 😆). Now I think about jumping on a bike I gotta let the ER know before I set out 🤣

@luizfreitas1315 27 күн бұрын

You know that you could painted it the way it were without needing to cut the strings😅😅😅

@T77BMX 25 күн бұрын

Thanks for the comment bro! Unfortunely the old spokes were rusty they didnt spin on the nipples and they were breaking super easy!

@luizfreitas1315 25 күн бұрын

@@T77BMX thanks for elucidating that my friend

@kevinthomas5939 29 күн бұрын

He is a genius. He took the back Will off and put it on the front of the bike wow.

@T77BMX 25 күн бұрын

Thanks broo!! yes the Spokes were too rusty and the Hub needs full internal service. We re-used the rim because its in good condition! thanks bro 👊

@RobynTapps 26 күн бұрын

Lacing wheels always pissed me off so bad lol

@T77BMX 25 күн бұрын

HAHAHA yeppp! its a pain in the A**! 🤣👊

@davidbauer2109 12 күн бұрын

This guy is a super genius. He took the back wheel off and put it on the front. Maybe you shouldn’t quit your day job just yet.

@T77BMX 9 күн бұрын

Because we created a NEW front wheel for our customer. The old Rear hub needs internal servicing & The old spokes were rusty and seized - So this way we have created an awesome NEW front wheel without having to throw anything into the bin! 🔥🔥🔥

@darthpalagus3820 Ай бұрын

You're on the level if you're repairing stuff with the wrong tools.

@onelovejl8098 Ай бұрын

Lol an so what the job was done perfectly

@darthpalagus3820 Ай бұрын

@@onelovejl8098 That was my point

@WayneBaete-gd3jx 2 күн бұрын

This is how a tweeker rotates his tires

@aurteekay6339 Ай бұрын

“Bro I just pulled up to the park where you at I don’t see you anywhere” Him : “oh I’m just under the ramp, doing weird stuff”

@omarraymundo7475 29 күн бұрын

Man this dude works fast !!! 🤔

@T77BMX 25 күн бұрын

Thank you broo!! 👊👊👊

@onlytank3937 Ай бұрын

He turned wheel to wheel. Amazing

@alphaomegazulu8451 Ай бұрын

F u, want a piece of me? Us riders stick together just like the local drug dealers yall became and now we war.

@MrHardRock. 27 күн бұрын

Snapping sounded like perry the platypus theme😂

@T77BMX 25 күн бұрын

Hahaha someone else said that too!! hahahaha bringgs back some memories 👊👊👊

@victoraguilar5424 19 күн бұрын

Smokin that good stuff 😂

@CIipz Ай бұрын

That unemployed friend on a tuesday

@kaseyanderson129 29 күн бұрын

Trued that wheel like a champ

@T77BMX 25 күн бұрын

Thanks brooo! 👊👊

@BoxHillAbo Ай бұрын

Mate no graffiti at the skate park 😂

@T77BMX Ай бұрын

🤣🤣🤣🤣 hahahaaa 👊

@dreamcalculator 29 күн бұрын

Sounds like everyone be living next to Leaf blowers these days lol

@bhoot1702 2 күн бұрын

Like the calm passive aggressive asmr

@dominicklobifaro5215 28 күн бұрын

Crazy mechanic skills he’s done that 50xs at least it’s not easy at all

@T77BMX 25 күн бұрын

Thank you so much bro!! yes re spoking can be sooo hard sometimes! thanks for the comment broo 👊👊

@lymondbethea3096 13 күн бұрын

Was you able to catch any rips bro 😎

@T77BMX 9 күн бұрын

Hahah thanks for the comment brooo! 🔥🔥🔥

@somerandomname9252 Ай бұрын

No son, you cant hang out at the bike ramps alone this evening...... 🤨

@JesusHernandez-vx3qm Ай бұрын

Good work man👍🏽

@T77BMX Ай бұрын

Thank you bro!! 🫡

@alternativeharvey7 27 күн бұрын

"Hey see that wheel?" "Yah!" I gonna destroy it and put on a similar one..ya know, like a smart people does!"

@T77BMX 25 күн бұрын

YES! Exacltly. Because the rear wheel was Broken so we used our brain to create new Wheel out of the Rim that was still working!

@MTran0708 Ай бұрын

Spray painting without a mask on is wild.....

@johnbookout3535 26 күн бұрын

Next time, don't clip the spokes in the first place.

@T77BMX 25 күн бұрын

Thanks bro! unfortunately the spokes were too old they were all rusted and broken!! so the nipples didnt work anymnore... We re-used the rim because its in good condition! 👊👊

@mrpelvic8312 29 күн бұрын

At first I thought the tire would stay on the rim, when you clipped it

@ricardobreddels123 6 күн бұрын

I thought like damm, if u aint wanna fix ur bike, u are free to not do it, but then it turns out all fine 😅

@Kickman81 24 күн бұрын

I love lacing and truing- I use to sit at my coffee table and build a set every night after work for local shop. They would pay me 50 dollars a set to build them. My garage had pallets with hubs, rims and spokes.. it was a fun side gig.. i miss that in my life