So scammers gonna scam again. I remind to you all - I have no telegram, or other messengers. I don`t do any giveaways or similar stuff. If you saw comments from "persons" who pretended to be me - report and block. Don`t let yourself be scammed.

I like watching luthiers working in silence. No music. Just the sound of tools on wood. It's very calming. Thank you so much

No music (apart from the occasional post repair strumming by others in your shop), no commentary, just an amazing demonstration of your skill. Love it!

Although buying a replacement neck is probably a lot cheaper than what you're doing, it's great to see a master at work.

This probably came out better than it did originally from the factory. Fantastic work - it was a pleasure to watch you restore this.

I've watched hundreds of luthier videos but this is the first time I've ever seen a truss rod replaced. It's like watching a guitar have open heart surgery. Beautiful work and well done on bringing the patient back to life!

I love your patience as you work. This is one beast of a job to do. Well done.

So completely impressive. If you had filmed this in real time it would have kept me watching for all the time you put it. I hope people cherish your work! Thanks

Thank you for posting this video. I've never seen a truss rod replacement before... your craftsmanship is second to none. Absolutely beautiful work on this job.

Wow Tanya, I am a guitar tech for over 30 years but I would never attempt to do such a difficult job as this. You did a masterful job. I am blown away by your skills, and I am learning so much from watching you work. Thank you for being there ♥️

This really makes me miss my old CIJ Jazz bass. It had neck issues but I wasn't equipped for this kind of repair at the time. Good to see it can be done.

Many people making videos don’t understand that the sound of life is music, so thanks you for letting us hearing the music of your life and your wonderful craft 😊 (land let me ad for the short documentary FOLI there is no movement without rhythm)

most people will never know the amount of work involved in repairing guitars. Well done Tanya, keep it up girl

Tanya, I love your videos so much. I've always wanted to repair musical instruments by myself, but never tried it. Since I discovered your channel I started to get some basic tools and I'm gonna learn to repair instruments by myself. So I wanted to say thank you very much! You're one of my biggest inspirations to learn to do something I've always wanted to!

There are two reasons that I adore this episode. First, and foremost was the demonstration of the entire process needed to remove, and replace a vintage installed, single-action truss rod. Then to fabricate a new fingerboard to match the spec of the original. The work was concise, detailed, and featured a methodical style of patient work flow. Second, this episode clearly shows evidence as to why stringed instrument repair fees are structured. Instrument owners, vintage or modern, should witness exactly how labor intensive this type of repair is. The magic of editing does make the course of repair seem to glide without time. Nevertheless, I applaud this necessary video for its attribute of your talent, as well as educating the musician(s) at large the cost of some repairs that require mass planning, and finishing. Excellent job, Tanya. I hope you were well compensated for this undertaking. Enjoy your weekend.

Holy moly. I will never ask anyone to replace a truss rod again!

That was therapeutic to watch. Beautiful craftsmanship and attention to detail. I’m sure it plays better than the factory setup. Well worth it to save a MIJ jazz bass. 👍

Siempre quise ver como una profesional reparaba éste tipo de problema y he de decir que no es un trabajo sencillo.Enhorabuena eres una maravilla!❤

That is the highest level of skill. There are other videos about this topic, but this is on the level of Stewmac or even above. Someone really most love this Japanese made Jazz bass.

This one was the most difficult i've seen so far. Incredibble job ❤

Absolutely beautiful work. Such respect being given to that instrument. I had no idea the amount of work and craftswomanship that went into the fretboard.

Wow! You’re as professional as they come 😊 I didn’t realize how much work time and skill is involved in this… Awesome job Tanya 😎

As a bass player, I always wondered how worn or broken truss rods were removed and replaced by luthiers. You are very skilled in what you do. Hat's off to you!

As soon as I saw you drilling out the the strip over the truss rod I knew what the issue was. I didn’t read any comments first so I could figure out the issue. You have crazy good skills as I’ve said on many of your videos. You go after these hard jobs like an old repair dog who has been doing it for 40+ years like me. I would be a little tentative on this but you killed it. I was a certified tool and die maker for my day job for 30 years and that skill was definitely applicable to guitar repair. You would be great at that trade as well. Guitars are much more rewarding to build. The pride you put into your work is very evident. Your videos hopefully will encourage all who do this have the same attitude. 👍👍😎😎🤘🤘

Nerve wracking to watch how much precision this type of job takes. So many ways it could potentially go wrong. I think I'll be sticking to repairing my own instruments because I'm not sure I could handle the stress of knowing the stakes of working on something sentimental to someone else.

Astonishing!! Wonderful to see your work, calm, precise and perfect executed. Wonderful. Congrats!

Extremely satisfying!! What a perfect job done!!! 👍X10K I don’t see myself wanting to be a luthier but this video is so good to watch!! Now I got to see how a neck replacement is done professionally. 30 minutes well spent!! Love it!!!!

That was excellent work. Thank you for sharing. I am excited to see the number of fans you have gotten in just a few months. You deserve it! Keep up the good work!

You are amazing!!. That looks like it was a tedious job and massive patience. Ive never seen a Truss Rod replacement, let along the entire neck with new Fretboard. I see the Crocs made the video, gotta be comfy as you work. Truly Amazing, Tanya.

You have the patience of a saint.

I've done this a few times and it is a chore. Well done 🤠👍

I’ve never seen anything like this. This woman takes an extremely tough and impossible job and produces a work of art. True craftsmanship.

I really enjoy watching you work on the necks. Your attention to detail and respect for process impresses me 😊

That was about the most amazing repair I’ve ever seen. Artistry.

Ah the good old surgical elastic I used a couple of bicycle inner tubes which I found in my stepsons pushy which he didnt use . Now that is what I call a professional job . Excellent work there I hope you are proud .

Remarkable skills that you have! The fret board and the highly polished frets look great. Thanks for another learning lesson.

A lot of other repair people would have put that neck in the bin and replaced it with an off the shelf replica. Kudos to you for making the effort to save it.

You have to have a great sensitivity in your soul to be able to do that type of work, it is pure art. Amazing.

I don't play guitar, I'm a drummer. However, there's a lot of joy in watching a craftsperson do amazing work on any instrument. I dig the audio too, no BS, just the sound of progress.

I don’t even play guitar but I really enjoy watching your videos. You do amazing work.

one of the best re-fret works I've watched on KZfaq

Terrific video and exceptional skills! Thank you for sharing these examples with your very nice video presentations that provide great insight into your methods without getting carried away with unnecessary video over production techniques that plague so much of what social media displays currently. I've been a part time luthier, player, designer for over 5 decades and your level of skills is not often witnessed. Congrats!

This is my favorite channel to watch. Very interesting to see all of the techniques used along with the attention to detail. Look forward to every video!

I LOVE YOUR VIDEOS!!! No annoying music, just the sound of world class labor!!! I wished you were geography closer so that I could send you my vintage Gibson 345 ES-TD for some much needed love & care!!

Great video showing the details that go into an insane repair like this. Someone must really love the feel of that neck to have paid for a repair like this instead of just getting a replacement or custom neck made.

Love these videos, as a fellow luthier (hobbiest) I know the difficulty and you did a great repair, nice work. Stay safe!

That little thumb plane was sharp! It planed cross grain rosewood wonderfully.

No wayy. This is the first time I’ve seen someone replacing the fingerboard on guitar. Most luthier here in my country they always saying no whenever i ask them to replace my fingerboard 😩. You are such a talented luthier Tanya. You really did a great job 👏👏

This is so damn cool. I love the quality of your videos. Thank you for taking the time to make them and share them with us.

Wow that was like watching an open heart surgery. Such a great job Tanya! The new fretboard looks absolutely stunning. Even though I'm a guitarist, I'd love to play this bass

Really incredible craftsmanship! Thank you for sharing your work!!

An absolute pro. I learn so much by watching you, Tanya.

I’ve done a bunch and this is among the best I’ve seen demonstrated. Real first class work right here.

Definitely went above and beyond with this one Tanya. I've seen luthiers tackle this problem by clamping the neck in such a way as to apply enough torque to facilitate engagement of the truss rod. More stubborn ones required the additional use, within the clamps, of a conductive high heat press. As always, great work and video documentation. :)

Just amazing work! You are obviously extremely talented! Your craftsmanship is second to none. Thank you for sharing. 👍🏻

Deine Arbeit an den Instrumenten ist pure Meditation ❤

Очень деликатная и тщательная работа, потрясающее внимание к мелочам!

I know it's a really hard and tough job for you, and you're really good at it!🙏🏻 But for me, and I'm sure for other people, it's very relaxed to watch your video's. It stimulates me to be more precise on my projects! Thnx Tanya!

That bass player ain't gonna have nothing to complain about. Excellent work.

Unbelievable workmanship!!! 😋🌶️🎛️😇🥰

I had no idea a truss rod could be replaced!! Stunning work....as always. This continues to be the best guitar content on KZfaq and its really cool to see the channel and subscriber number grow!! You should definitely offer those "Shpachuk" T shirts for sale! 🙏😍😁

Love your videos. Not only are you exceptionally talented but your video editing is fantastic! Those transitions of all black are really good. :)

i’ve been doing some basic lutherie work for a year or so now as the first woman to work in the shop, it’s nice to see your epic skill! inspiring. i hope to be advanced like you in the future

Wonderful, Tanya, wonderful!!! You are GREAT, GREAT, GREAT!!! CONGRATULATIONS!!!!

What a pleasure to watch someone who knows what they’re doing! A truly skilled artisan! Kudos to you!

Excellent video! It's really satisfying, I guess for all of us, to see such dedicated and careful work being made. For you for doing, presenting, in a good pace, demonstrating your dedication. For us so we can be inspired and resonating with this demonstration of how we can face our pathways in life. It's difficult to see but, for every single activity that we make in our lives, being involved, focused, curious about how to manage / solve problems as they are being encountered, true engagement in what we are doing. If we cannot reach this perspective, we need to ask then: why am I doing this? Great Work, keep it up!

Very ballsy thing to do, and the patient lived! My respects to you. Couldn't a new neck have been ordered at a comparable price?

I am watching this before going to sleep... Really calms me

You do fantastic work, great job. If I were the owner of that guitar to me it seems it would have been less expensive to just order a replacement neck. I am sure that job you did cost more than what a new neck would have cost. That had to be an expensive job with all the great work you did.

Fender designed his instruments with bolt-on necks so that you didn't have to go through all this.

That is some fine work, i've never seen anyone attempt such a tricky repair before

The beauty of Fender's is the necks are easily replaced.

Trabalho de excelência ❤

Love the videos. All the best to you and your loved ones in your difficult situation in Ukraine.

That was an absolute masterclass job. You have meticulous attention to detail, I would trust you with any of my guitars. Keep up the superb work.

intensely educational. thank you so much for taking the time to show your incredible skill

So I must’ve missed something but when did you put the new truss rod in, it just looks like you glued wood in there

Who is this person without Nail Art who takes over at 7:28? What have you done with Tanya!

I'm heading in to my very first truss rod replacement. Thank you for the example. I like the idea of putting the filler piece below the truss rod instead of doing exactly what fender did.

I knew a truss rod replacement is hard and expensive, now I know why… Very interesting to watch, and what a beautiful result!

Great job the reason leo made the bolt on neck is so you didn't have to do repairs like this lol

Did the client spec. a 14in. radius ?

Incredible craftsmanship, brilliant to watch. Respect

This woman is pure COMMITMENT turned unto human form 😲❤

На это можно смотреть вечно) мастерская работа!💪

I'm a little surprised this neck was worth repairing, since the only original piece that remained by the end was the maple part.

That was terrifying and beautiful to watch. Thank you for rescuing it. ❤

Tanya you rock. The level of work you do is first class. Hats off to you, brilliant. Thanks very much for the video

No, I have no idea why you solder the frets.

Is this cheaper than a new neck?

Always wondered how a truss rod replacement looked. Very cool.

Interesting take on trimming the fretboard near the nut, I'll have to try that. Thanks for the tip & good work!

Flying mosquito 🤣👍

God this is amazing.. i have been looking for a video like this with no ridiculous trendoid voice over or even trendier hipster music.. this is just heaven and amazing skill to go with it! Mezmerising!

Such patience, and a brilliant result. I have a 72 Jazz Bass that someone put a fretless fingerboard on (sometime before 2001). I have no idea who but it's a great job. With that in mind I took my prized 78 Precision Bass to Jim Fleeting (Stockport, England). He did the same and although the barbed frets caused problems the end result is incredible. Smooth and balanced all over. I lose patience changing strings so Big Shout out to the luthiers.

Great job! I'm having so much fun watching you work

Tanya, well done, you are a master...good job....Tanya's hands are worth their weight in gold

Really enjoyed watching this, I was a bit anxious to start, then as the video went on, I was amazed at how well, the guitar looked, you have an incredible skill, with immense patience too.

Impressive to say the least. Not only do you have an amazing skill and talent, you have unparalleled patience. I would have thrown that neck across the room 10 minutes in! Bravo!!

Wow, you do beautiful work. Thank you for allowing us to watch....