Extruding PLA Filament at Home

Рет қаралды 379,959

Күн бұрын

Start your free trial at squarespace.com/cnckitchen and use code CNCKITCHEN to get 10% off your first purchase.
I'm starting another journey into filament-making. In the first video of this series, I'm extruding my own PLA filament in different colors using the 3DEVO Desktop Filament Extruder.
Thanks to 3DEVO for lending me one of their machines: geni.us/3DEVO-FilamentMaker
Thanks to DasFilament for providing the Masterbatch samples: geni.us/DasFilament
Website article: www.cnckitchen.com/blog/makin...
💚 Support me 💚
Patreon: / cnckitchen
Join as a KZfaq member!
Original CNC Kitchen Threaded Inserts: geni.us/CNCKInsertsChoice
Merch: teespring.com/stores/cnckitchen
Buy an Original Prusa i3 printer: geni.us/CNCKPrusa
PayPal: www.paypal.me/CNCKitchen
Shop at Matterhackers(US): www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): geni.us/zHvnB
🎙Check out The Meltzone Podcast: / @themeltzone
🛒 Equipment used in this video:
3DEVO Composer 450: geni.us/3DEVO-FilamentMaker
3DEVO Shredder: geni.us/3DEVO-Shredder
Original Prusa MK3 (Affiliate): geni.us/CNCKPrusa
More affordable "maker" extruders:
Filastruder: www.filastruder.com/collectio...
MAHOR direct pellet extruder: mahor.xyz/
Felfil Evo: felfil.com/felfilevo-filament...
Filabot: www.filabot.com/collections/f...
Generic Aliexpress Extruder (Affiliate): geni.us/mRt2
🎥 Related videos:
Recycling failed 3D prints: • Recycle your failed 3D...
PLA vs PETG vs ASA: • The BEST 3D printing m...
3D prints remelted in salt: • The STRENGTH of 3D pri...
📖 Further Links:
Waste recycling into filament: www.qitech.de/
DIY recycling into filament (Russian): / brother-live
⚙ My gear (Affiliate Links):
🎥 CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: geni.us/M2Sm
30mm f2.8 macro - Great Macro Lens (80% of my videos): geni.us/vEwqD
10-25mm f1.7 - Awesome Lens: geni.us/ZTBH
12-35mm f2.6 - Great Allround Lens: geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel Lens: geni.us/fSAyKo
25mm f1.4 - Nice prime for photography: geni.us/mqWM
🎙AUDIO
Rode Video Mic Pro - Shotgun mic: geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: geni.us/XMD2N
Rode NT-USB - Studio Mic: geni.us/YVONvy
🔴 LIVE STREAMING
Elgatoo Stream Deck: geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: geni.us/imhD
Logitech C920 - Overhead camera: geni.us/ViVgB
Follow me on Twitter: / cnc_kitchen
Follow me on Instagram: / cnckitchenyt
Chapters
00:00 Introduction
01:17 Extrusion Material
02:10 Extruding Clear PLA
05:52 Extruding Red PLA
08:22 Extruding Sparkly Blue Filament
09:34 Recycling failed prints
10:31 Pricing and target audience
11:51 Squarespace Integration
13:14 Summary
#3Dprinting #filament #DIY
DISCLAIMER: This video was sponsored by Squarespace.

Пікірлер: 708

@CNCKitchen 3 жыл бұрын

What are your extrusion or recycling ideas? Don't forget to like & subscribe and share this video on Facebook, Reddit, Twitter, and other platforms!

@liveriesfsx9352 3 жыл бұрын

I kept all leftovers and failed prints with hope to get or build one recycling and extruding solutions one day but checking just few days ago the those sold by the companies, not even a single one is worth the price or should I said within reasonable hobby budget if you're not printing on daily basis unfortunately. DIY is the way I will have to dig for info on. Hopefuly I will find something interesting and with reasonable price tags.

@liveriesfsx9352 3 жыл бұрын

By the way, have you seen those? twitter.com/joshuartaylor/status/1408623749402927104?s=19 kzfaq.info/get/bejne/bdCFibGFybuUiHk.html

@freddymaster0057 3 жыл бұрын

you should try extruding lego in your next video

@curator23 3 жыл бұрын

I would like to see Copper Fill mixed with Conductive PLA. Will the copper make it more conductive? Will diluting the Conductive PLA with the Copper Fill's binder make it less conductive? Perhaps the surfaces of the copper particles are oxidised and won't conduct at all?

@freetechdk 3 жыл бұрын

How about the cheap biodegradable trash bags as they sometimes can be found super cheap and I think they are in the same plastic area as PLA... But not sure at all about that... but Yep could be fun to see if its possible to print with biodegradable trash bags as filament

@mattgavioli6762 3 жыл бұрын

"guys only want one thing and it's disgusting." What guys want: **being able to recycle failed prints**

@hayden9944 3 жыл бұрын

Gay

@jaredjones6570 3 жыл бұрын

This is sort of true. Guys aren't ALWAYS thinking about sex. Sometimes we get really focused on projects and optimizing every little parameter to enhance the final result.

@PrestonMcgill 3 жыл бұрын

if i could recycle resin prints id be even happier

@DarkISO25 3 жыл бұрын

I have a bag full of supports and skirts/brims and failed prints. Wish there was a good/affordable way to recycle them into filament to use again.

@DavidGarcia-nx2gj 3 жыл бұрын

imagine, it would be a great world, I cant even imagine how it could explode society if it were affordable, like everyone could be extruding their own filament so cheap that you could just make everything at home

@jayphone1 3 жыл бұрын

"Clean it. Shred it. Sieve it. Dry it." The hit Daft Punk never made.

@2QRh6g1I 3 жыл бұрын

More than ever, hour after, hour work is never over.

@gustavrsh 3 жыл бұрын

@@2QRh6g1I it's technologic, not Harder Better Faster Stronger

@TheMeeploo 3 жыл бұрын

Clean it. Shred it. Sieve it. Dry it. Feed it. Heat it. Shear. Extrude it.

@drew899 3 жыл бұрын

I read this in the “bop it” voice.

@PureRushXevus 3 жыл бұрын

I read this before that part of the video, and I immediately heard it in a daft punk style with some rhythm in the background xD

@170makes9 3 жыл бұрын

Failed prints -> New filament. Every maker's dream.

@CNCKitchen 3 жыл бұрын

Let's see if something like that might be viable in the future.

@unknown_10453 3 жыл бұрын

@@CNCKitchen Tons of youtubers have shown that isn't something you can do, not right now anyway. It always results in either bad filament or a mess.

@ModelLights 3 жыл бұрын

'Every maker's dream.' Only makers who haven't tried it. If you have, you know it isn't even cost effective on time and materials, much less buying the machine..

@mungo7136 3 жыл бұрын

@@ModelLights Do you realize that "dream" is something you wish to be possible not something that is possible? Thus for 3d-printing hobbyist who produces thus enough of the test / prototyping / failed prints affordable and working recycling system really might be a dream. Even more if he/she uses some higher quality/price filaments.

@lawrencecole6527 3 жыл бұрын

5000 dollars

@rushilkisoon 3 жыл бұрын

Imagine how much better the world would be if these were affordable 😭

@youdig-detection 3 жыл бұрын

it's just a question of time, i found those greatly overpriced... what will be cool is to send back unused filament to a brand and they give you a discount on purchase.

@mgrsdesign6323 3 жыл бұрын

@@youdig-detection Addnorth already does that. "Instead of waiting on local government to establish a supply chain for separating and collecting bioplastics and petro-based plastics, use RE-ADD! We collect waste and spools from users of our filaments and reuse it separate recycled product lines." I think that you get 10% discount and I think it's only in Sweden/nordic countries. It's a great idea tho.

@magnetwhisperer 3 жыл бұрын

It should honestly be illegal to sell these things at this price.

@youdig-detection 3 жыл бұрын

@@magnetwhisperer apparently those are made for company that do prototyping on material , not maker like us ... but surely it would be great to have one for maker with a way lower price tag.

@AndrewAHayes 3 жыл бұрын

@@magnetwhisperer If the demand for these machines increases then the price will decrease, the problem is you cant increase the demand without reducing the price in the first place so it becomes a gamble, you have to have the capitol to purchase in bulk to reduce production costs then produce in bulk sell cheap in the hope you increase the demand to a much greater level than your initial production run.

@eightmantis976 3 жыл бұрын

In the plastic injection world we usually never used 100% regrind, it was usually only about 25% at the most

@vhoward1122 3 жыл бұрын

This is what I was thinking. Mix the recycled with virgin to make it more consistent. Even recycling glass, they only use a certain percentage of recycled to new.

@gglovato 3 жыл бұрын

same thing i thought about, if he could test something like 20 to 75% recicled with the virgin PLA

@nathan1sixteen 3 жыл бұрын

I was thinking at most a 50/50 split, but also, I'd imagine the most virgin plastic you used, the better the outcome will be

@matneu27 3 жыл бұрын

Then I wonder why German table water sellers claim that their pet bottles are 100% made of recycled material?

@CNCKitchen 3 жыл бұрын

PET bottles are one of the rare instances that can be properly recycled due to our deposit system.

@JavierCamacho 3 жыл бұрын

I own one of these machines and I can say it is the best decision I made. I bought a pallet full of recycled PETG for under $300 and I've been making my own filament for almost year now and I still have around 60% of the pallet left to be used. There is a learning curve sense recycling petg into filament is not that easy but I've learn a lot and now, after 1 year, I'm making my best filament yet.

@PolygonJon 3 ай бұрын

How much do one of these extruders cost? Their website is devoid of any details.

@TouchofDepth 2 ай бұрын

7 grand@@PolygonJon

@Nitram_3d 3 жыл бұрын

To get more consistency when extruding recycled polymers. Make pellets first.. extrude 3mm and then chop it into 3mm long pellets

@riba2233 3 жыл бұрын

Smart!

@walkinmn 3 жыл бұрын

I've thought about that too but I wonder how much reheating you can do with PLA and PETG before you degrade too much the plastic? does someone know how can I research about this?

@ArnaudMEURET 3 жыл бұрын

You take the words out of my mouth. Pelletizing through a first low temp pass seems the obvious way to alleviate homogeneity issues. Amazing Stephan hasn’t tried it. 🤷‍♂️

@CNCKitchen 3 жыл бұрын

Will try that because I built a pelletizer a while back.

@macgyver9134 3 жыл бұрын

@@CNCKitchen Are you measuring the power it uses? In the end recycling is cool, especially for shops that melt a lot of plastic into support material, but if it costs more than a new roll to remelt it... most shops are going to choose the landfill option.

@kylek29 3 жыл бұрын

Side note, the master batch manufacturers would likely send you sample sets of pigment/plastics if you contact them. They're trying to get new clients and sending out small batches for testing can be common. I know of a few plastic manufacturers that will give you a trash bag full of pellets if you show up at the factory.

@daveabittner 3 жыл бұрын

The trash bag definitely makes sense, but I have a feeling they aren't too concerned about ol' Stefan here as a client considering he'd buy such small batches.

@CNCKitchen 3 жыл бұрын

I need names 😉

@julianbinder2371 2 жыл бұрын

@@daveabittner yeah, but its probably not worth it to look up everyone you send a small bag to, the bag only costs less than 5€ probably, wich is less than a person who knows how and where to reserach brands and firms and stuff

@harkrits.nagpal6505 3 жыл бұрын

You should re-extrude the recycled filament which is bad, by chopping it up with a simple machine. The output should look like the masterbatch, and should function basically like the pellets, which should give you similar extrusions like the new ones. I know it uses more electricity, but I would like to see how much of a change it can make to the filament quality!😁😁

@CNCKitchen 3 жыл бұрын

I built a pelletizer a while ago. Might be trying it out again!

@perlsackhd3957 3 жыл бұрын

Just use it on windy day when there is an energy overhead tho it might not really work in the south of germany

@bluephreakr 3 жыл бұрын

@@CNCKitchen Wouldn't recycling filament over and over again, even if using virgin pellets compromise the strength of the print? It'd be interesting to test how filament strength degrades over time using a mix of spent coupons with used filament of the same type and colour.

@3dPrintCreator 3 жыл бұрын

Oh please use PET bottles. I have access to an unlimited amount of them, so if they are usable, that would be so nice.

@tomas0413 3 жыл бұрын

I also would like to suggest extruding PET plastic. I tried extruding it myself using Filastruder, but found it quite complicated due to viscosity not being high enough.

@emielv7677 3 жыл бұрын

I went on a course at this company last year. Their team is amazing. Their machines are amazing. Their facility is amazing. It is a super interesting process but you need a lot and I mean a lot of knowledge about plastics and other stuff because you've got a lot of different parameters and factors that come into play. We tried all day to extrude injection moulding grade polypropylene but the end result wasn't great. If we used 3d printing grade or a different kind of polypropylene we might've been successful. But anyway I had loads of fun and learned a lot.

@groggysword33 3 жыл бұрын

*Has the same desk speakers as Stefan* I’m pretty much Stefan now. *print fails in background*

@superdupergrover9857 3 жыл бұрын

Plot twist: 3devo's biggest customers are landscapers who are making their own trimmer string

@TheToelle 3 жыл бұрын

dude. I am so excited for your recycling video!

@CNCKitchen 3 жыл бұрын

Coming soon!

@choschiba 3 жыл бұрын

Once the Maker Space in Liechtenstein becomes reality I really hope that we will also have a setup for reycycling plastic and failed prints. At the moment I am recycling it at our local recycling center. At least we have one of these close by. Many makers don’t have, which is really a pity. Ending up in landfills is a no go. No matter what kind of garbage it is.

@brodyweaver6599 3 жыл бұрын

Recycling failed prints/supports/raft/brims should be the future of 3D printing. Printers are getting more and more capable/accessible but we’re still stuck with tons of wasted plastic.

@RangerOfTheOrder 3 жыл бұрын

Maybe someday manufacturers will put recycling marks on their spools. Then we could turn our spools into filament too. Or you know, just recycle them.

@pugofstardock 3 жыл бұрын

Can you give a roll to Tom for his filament diameter sensor?

@KeeDel 3 жыл бұрын

bro over the last week I've been researching this and been watching your old videos thank you so much for making this updated video

@CNCKitchen 3 жыл бұрын

Glad I could help!

@robertmyers5269 3 жыл бұрын

My, what a blast from the past. Back in the late '70s, early '80s i was engineering support for a process that stretched glass tubing in a very similar way. We had the additional issue of pressurizing the draw to maintain the hollow tube aspect ratio. Obviously the temperatures were much higher, and at the time this was all analog. Also obviously the oven was much bigger and more expensive.

@CharlieBasta 3 жыл бұрын

Wow that blue with sparkle was AMAZING!

@BRUXXUS 3 жыл бұрын

The fact that there’s not been a decent, affordable solution for hobby level filament production and recycling either shows how hard it is to get right, or how little interest there is for it. Although, I think interest is quite a lot higher than companies know. First to get it right will make a fortune.

@machoneboard 3 жыл бұрын

Maybe the plastics industry doesn’t want it……

@emielv7677 3 жыл бұрын

It is really complicated. I went on a course at 3devo and the amount of engineering that went into this machine is absolutely nuts

@Thomas-jq2im 3 жыл бұрын

@@csPinKie WTF? It's well known that industry hates competition. Lumping their comment in with conspiracy stuff is quite a stretch. Go read a book.

@tymoteuszkazubski2755 3 жыл бұрын

Parents are a thing, designing and making such machine commercially is hard because you have to avoid infringing on patents or pay licensing fees.

@csPinKie 3 жыл бұрын

@@Thomas-jq2im imagine coping so hard and looking at peoples channels xdd

@QBziZ 3 жыл бұрын

This is definitely content we want to see. It is interesting and inspires. You do a good job of fully motivating it so everyone knows what’s up.

@ChristianOhlendorffKnudsen 3 жыл бұрын

Wooohooooo! Shoutout to DasFilament, also my go-to for consistently high quality and reasonably priced masterspool-compatible filament.

@CNCKitchen 3 жыл бұрын

They deserve it.

@PureRushXevus 3 жыл бұрын

The first 6 minutes I slowly started thinking more and more "yeah... This thing's not gonna be affordable, is it" I then look at the link... And FML. Didn't expect it to be *that* expensive

@europhil2000 3 жыл бұрын

This is me watching any maker/engineering yt video... While it's still nice to watch those videos it is also very frustrating to see that these youtubers get the top notch machines for free... I actually enjoyed that Stefan acknowledged that, sometimes I feel that makers don't see this problem at all - I probably wouldn't either and would just enjoy my machine...

@PureRushXevus 3 жыл бұрын

@@europhil2000 he doesn't even get to keep it, I believe :p

@europhil2000 3 жыл бұрын

@@PureRushXevus oh snap

@petermolnar6017 3 жыл бұрын

As always high quality, Danke Stefan!

@TBL_stevennelson 2 жыл бұрын

I really Like the Natural PLA. Prints very Well.

@egorkorostelev999 3 жыл бұрын

I was been waiting for this!!!

@AkiaraDolls 3 жыл бұрын

I do love your videos, they're so fun and intresting. Just hope you don't leave forgoten the DIY filament extruder project. ☺️ And thank you very much for sharing all the content you do.

@TarekMidani 3 жыл бұрын

This is my home setup dream 😭❤️

@caodesignworks2407 2 жыл бұрын

This is the closes I've seen to a home machine for extruding acrylic filament that I've seen so far.

@nathan1sixteen 3 жыл бұрын

The thing that excites me the most here is material mixing. I've seen a few companies develop an "ABS/PLA" mix, and supposedly it prints easy like PLA, just at a higher temp, and has a lot of the characteristics of ABS, so it's like a "win-win" type of plastic. Something like this would be cool to try things out. Maybe a PETG-ASA mix, or even mixing in glass fibre or something

@KaminoKGY 3 жыл бұрын

👉 Next video: What's stronger between recycled Lego & recycled Playmobil? 😅

@PeterAcrat 3 жыл бұрын

Failed Print Recycling would be a Massive game-changer. Love to see you win with that👍

@keithyinger3326 3 жыл бұрын

I wish we could recycle resin 3D print material that way. Also, imagine how cool it would be if you could toss in some old plastic soda or water bottles and get 3D filament out the other end to print new things with. I know.. not possible, different types of material, but that would be pretty cool.

@matneu27 3 жыл бұрын

Future bulgars will not steal your money or diamonds, they take your recycling bin and all the 3d prints in your home because of the raw material prices 😉

@RichRap3D 3 жыл бұрын

Hi Stefan, Really interesting to see you using the 3devo extruder, I'm looking forward to the recycling episode next. Also it would be interesting to see how much wasted plastic / purged / flushed / contaminated you end up with by the end of the series. I think that is quite an important factor for these small batch production systems as it's then something you will need to dispose of or find a use for...

@user-xb5zu6zu7j 3 жыл бұрын

PEEK idea is very good. You can actually "cook" your own filament. How cool is that! The price is way too high to me though.

@Crypt1cmyst1c 3 жыл бұрын

I just want a way to use waste pla as support material. A dual extruder that can print the new stuff for the part, and the recycled stuff for support would be ideal.

@AntonySimkin 3 жыл бұрын

You would need to build a whole extension like with python for that. In G-code support material is the same as normal print. It just differs in speed/amount of material. So basing on that you would need to make a parser that detects where the supports will be and offsets the print to the second extrusor. Do you see some other way to do that?

@AntonySimkin 3 жыл бұрын

@@cambouiscom i may be outdated. I use Slic3r with Repeater and I couldn't find any option for that. What's the name of it? I want to see how it handles on the level of gcode

@coreforge 3 жыл бұрын

@@AntonySimkin Repetier doesn't expose all options (if you meant that)

@Crypt1cmyst1c 3 жыл бұрын

@@AntonySimkin the gcode uses two different extruders. The slicer creates gcode that tells extruder1 to create the part, and creates gcode that tells extruder2 to create supports. Not sure about main slic3r, but PrusaSlicer, which is essentially a slic3r fork has the settings under "multiple extruders" to print rafts/supports/skirts, infill, solid infill, perimeters, and support/raft interfaces with different extruders. If you had a theoretical printer with 5 extruders, you could print each of those with different extruders.

@AntonySimkin 3 жыл бұрын

@@Crypt1cmyst1c Well this is actually awesome. I always used 1 extruder so Slic3r fullfilled all my needs. From what you explain, there is no problems at all to use recycled plastic of any type for supports. Even better... You can make supports from some kind of hard plastic like ABS so it doesn't stick well enough to PLA and detatches easier

@jayphone1 3 жыл бұрын

Interesting, that there's no "Creality XTRDR 10" yet. Chinese production at scale could make home made filament much more affordable.

@nathan1sixteen 3 жыл бұрын

I feel like the demand isn't there, much like DIY inkjet cartridge reloader machines or diy paper producers/recyclers aren't a thing. It's waaaayyyy easier to just purchase filament than to go through the hassle of making your own. I mean, most people only print PLA (honestly, 95%+ of my printing is done in PLA), and when I can find PLA for $10-$12 a roll, why would I waste my time on one of these? I mean, at that price, just tossing failed prints and support material makes sense, and with PLA being a corn based product, it decomposes quite quickly, so it doesn have a huge environmental impact. Now, with that being said, despite the fact that PLA can be found super cheap, I still save all my failed prints and support material and all, so I have boxes waiting for the price of these extruder machines to reach a point where I can afford one. No really to make my own plastic, but because it's just another aspect to the hobby.

@jayphone1 3 жыл бұрын

@@nathan1sixteen True. Cheap direct pellet extruder 3d printers could be more of a next big thing for Chinese manufacturers maybe.

@CNCKitchen 3 жыл бұрын

Calculating a ROI even at a way lower price is very hard for someone who might only print 10 to 20 spools per year though this might be viable for small businesses.

@exaltdragon 3 жыл бұрын

There's plenty of twin screw extruders and compounders, even lab sized ones on Alibaba and other China B2B websites. I don't really see the point of using a single screw extruder if you want to go for consistency, which any business would want. Once you start to go into any kind of mixing, e.g. recycling, composite materials etc then twin is really the way to go.

@FAB1150 3 жыл бұрын

@@nathan1sixteen i disagree, as the 3D printing community is currently formed mainly by makers and tinkerers, who enjoy being able to do stuff for themselves. I for one would absolutely love experimenting, if not with different materials with colors, additives, ...

@someguy2741 3 жыл бұрын

I played with layer height and over extrusion to really aim for transparency. I was using red and yellow translucent and it is pretty impressive how nice it can be. I basically added extrusion on the first layer and internally until bad things happenned. Basically bulging. I also switched to a mirror print bed which really makes a beautiful bottom surface. Between that and prusa ironing... which I also tuned to fill the gaps the results we pretty good. As a mostly transparent item it was very good results.

@pyro1596 3 жыл бұрын

Love the new intro!

@avejst 3 жыл бұрын

Interesting video as always 👍 Yes I learned a lot Thanks for sharing your experience with all of us 👍😀

@sebsmith3797 3 жыл бұрын

Got one of these at work, works well 👍

@Flederratte 3 жыл бұрын

Great project and nice video!

@TomTheWise_ 3 жыл бұрын

In my opinion the best and biggest break through in 3D Printing would be reliable and affordable 3D Printers that you only feed directly with pellets and where the process of making spools would be skipped. This way even the environmental part of 3D printing would be much better. No more spools, no more throwing away near empty spool that don't have enough Filament for you parts and much better netto weight in shipping the pellets and ideally of course even allowing using old shredded parts. Really hope that this will become a thing in the next ~5 years or so.

@DrakeOola 2 жыл бұрын

never gonna happen. It takes extreme precision even compared to a 3d printer just to extrude pellets into filament. Theses 5,000 dollar machines can barely do it with evenly sized pellets and they use an optical feedback system to precisely measure the diameter. Never gonna fit something like that into a cheap 200-2000 dollar printer. Hard enough to get it coming out at an even rate let alone starting and stopping on a whim like a regular 3d print. The stringing you'd get would be impossible to stop and like he said, heating the material for too long degrades it. Your plastic will be even more brittle than glass by the time it gets extruded if it's not turned into dust first...' Just not physically possible to melt a small volume of plastic and have it extrude evenly while also being able to prevent over extrusion during air paths. Plastic is just not the material you'd use for a pellet extruder, you'd need something exotic that doesn't degrade with heat. Liquids would be a million times easier to work with, perhaps some kind of solvent to dissolve the plastics with a secondary solvent that instantly hardens it. a cross between fdm and resin printers but we'd need to learn a lot more about material science before something like that is possible, some kind of material that can be turned from liquid to solid and back to liquid on a whim and not degrade from melting like heating plastic. Plastic is just too hard to recycle and too nuanced, even with manufacturers stamping the material type on bottles it's still not economical. No way we'll get that for 3D printing, not when everything is decentralized and there are millions of filament producers that use their own custom blend of who knows what type of additives. The parts you'd typically recycle being small miniatures from millions of users who each have multiple different spools from multiple different companies. You'll break the bank just trying to sort through all that and have sub-par filament that's been reheated too much and it'll ruin so many prints if even a tiny fleck of abs or any different material slips in with your plastic. Just no market where anyone would pay for sub-par recycled material at 2x or even the same cost of a brand new, hinder free spool. All the companies that try inevitably go bankrupt. We shouldn't be wasting money trying to make some magical recycling device, it's better spent trying to move away from plastic into something more environmentally friendly or at least easier to recycle. Not a matter of technology to make it economically viable to recycle, it's up to improvements to material science.

@josiahong5177 3 жыл бұрын

Oh yeah. Wanted to see more videos like this

@Guardian_Arias 3 жыл бұрын

Hope you try to make pallets from the shredded material by cutting up the inconsistent filament and then send it back thru for your final filament. I bet you could use an extruder to push the stage 1 filament into a rotating cutting wheel that kicks out pallets. Might not even need drying plus the first few meters of wasted plastic could be recycled almost instantly.

@peerappel2012 3 жыл бұрын

This is awesome! I can't wait to see how the recycling goes. And maybe you can also try to make some very special filaments like metal or wood filaments?

@ET_AYY_LMAO 3 жыл бұрын

Try mixing the recycled filament with virgin pellets...

@friddevonfrankenstein 3 жыл бұрын

I'm really excited about the upcoming recycling video. would be really cool if you could try recycling not only failed prints but also other items made from PET and maybe even a mix of PET and PETG. And the cherry on top would be mixing in other materials, such as carbon or maybe cotton fibers. I'd love to know how that turns out. :)

@frankdearr2772 8 ай бұрын

Great topic, thanks 👍

@Freakmaster480 3 жыл бұрын

loved the vid. keep up the great work

@kristiandelchev4034 3 жыл бұрын

Very good episode!

@JATMN 3 жыл бұрын

Cant wait to see what else you can do with this machine. It would be nice if you can do a recap at a later time going more into the details of the challenges of trying to make your own filaments with the various machines you have used and their pro's and con's. While possibly going into the challenges you might face actually getting virgin resin and masterbatch colors, as you mentioned buying what you got from Das can be a bit difficult for the normal person.

@aaronbarrett6618 3 жыл бұрын

keen for the second part of this. My first thought is can you add a step to turn the failed prints into pellets. Second is other people have mentioned mixing recycled and new material for better overall quality. I'd honestly love to be able to recycle failed prints/supports WHATEVER it takes because I doubt they are actually getting recycled at all otherwise (recycling is comparatively really bad in Australia, and I doubt they know what to do with random unlabelled plastic shapes)

@CanuckCreator 3 жыл бұрын

Tip for using ground recycled prints, don't do 100% used material, use a mix of old+new material, this should help a lot with consistency Also would love to see if you could make DIY blends with this setup, PC/ABS/CF blends maybe?

@derteufelsbraten3670 3 жыл бұрын

Can you make a video about clamping force degeneration of diffrent filaments? I figured out that PLA degenerates clamping force very fast and is therefor not a good material for compliant mechanisms.

@CNCKitchen 3 жыл бұрын

Working on it.

@RandallStephens397 3 жыл бұрын

one or two of these machines would probably be great for someone starting up a small commercial custom 3d print workshop; the Kinko's of 3d printing if you will.

@GraveUypo 3 жыл бұрын

Nice work with the recycling! But I'm one step ahead of you. I cut out the middle man and just printed a spool of filament. perfectly recycled.

@CXensation 3 жыл бұрын

Sparkling ...

@glutenfreegam3r177 3 жыл бұрын

Damn! I NEED me some 3devo in my life asap. I have been saving failed/bad prints and scraps for years!

@benfpsgaming4419 3 жыл бұрын

Two tricks you could try out for the next video came to my mind: 1. To eleviate the issue of shredded material being moved inhomogenously by the screw, first make your own pellets out of old prints. Use them to then extrude the "final" filament for more consistency. 2. Instead of trying to make filament purely from shredded prints, you could try to add a certain (weight) percentage to virgin pellets, basically stretching the whole mixture like cocain and baking powder ;). No but jokes aside, this would offer an opportunity to reuse at least some old material, although I bet colours for example would be a bit off compared to only using virgin pellets and dye.

@Kady3DPrinting 2 жыл бұрын

I always save my failed prints, because i will get one of these machines in the future

@bentebrunsvelt319 3 жыл бұрын

👍👍gut gemacht

@FredericoRamos 3 жыл бұрын

Nice, very nice.

@perrinsilveira6759 3 жыл бұрын

I would love to see a comparison of the different pellet types, how they affect filament extrusion/material properties, and a matching of different filament brands to the closest pellet extruded match. I have been trying to figure out material properties based on material brand for my job, and to some extent color additives, but it has been a nightmare. Having a way to classify filaments in some way would be a huge help as most TDS/SDS don't list the pla composition they are using or the pigments used. Or other filament types for that matter.

@MihaiDesigns 3 жыл бұрын

Pretty compact machine. Wondering about the two gears: doesn't the filament become a bit oval after passing through them? 3:47 video played in reverse 😁

@CNCKitchen 3 жыл бұрын

🤫 Psssst, don't tell everyone.

@mitchellpatterson1829 3 жыл бұрын

This is a neat exploration of an $8000 machine. Even if you hacked a "0" off it's still way above hobbyist print recycling.

@perlsackhd3957 3 жыл бұрын

Those regrinds are kinda interesting because they would allow you to get a somewhat consistent granulate without too much grinding

@marsgizmo 3 жыл бұрын

this would be awesome for PEEK 😎

@Zibouloubloub 3 жыл бұрын

3D printing is becoming real-life Factorio, 20 years from now we'll be harvesting plants to feed to our biomass engines to make PLA pellets to make filament to 3D print more production.

@tilmaen 3 жыл бұрын

Hi Stefan! Awesome video! Can you try out adding a blowing agent. Similar to what colorfabb are doing?

@ET_AYY_LMAO 3 жыл бұрын

What a nice compact machine. I made something like it back in 2014 with my old man, its a lot bigger though and kind of a rube goldberg machine compared to this device.

@marsniper27 3 жыл бұрын

To help with recycled material you could extrude at large diameter and make a machine to get to pellets and redo to help make a more consistent final product.

@BangHamdan_ 3 жыл бұрын

Woooowwww... Cool man....

@lacomarca3d796 3 жыл бұрын

OMG, this is really evolving fast. Anyway, a cost analytics of the recycling process would be great! Shredding takes energy, not to speak about drying, and then melting the material into filament after mixing it with raw PLA… is that worth the investment? Great content as always. A cuidar-se Stefan :D

@Holms Жыл бұрын

There should be a way to have shredder for usual plastics like bottles and use that to make fillments..

@adampolansky3405 3 жыл бұрын

I'm so glat that you use czech 3D printer!

@WaynesStrangeBrain 3 жыл бұрын

Would you ever consider trying to make your own high performance/filled filaments like glass fill or metal composite (like the virtual foundry? )

@MitchDavis2 3 жыл бұрын

Just curious, what is the humidity like in the room you’re in? I’ve been reading the 4043D handling documents and it’s all pretty vague, saying you NEED to have the filament at 200ppm moisture. Did you have any way to measure that? The documentation says that it can make weaker filament if it’s not completely dry. I just bought 1700lbs of nature works PLA, and it just arrived 2 days ago. I’m a little nervous to open it all up before I know what I’m doing. Fantastic video by the way. Love to see stuff like this covered since not many people do it

@YourBuddyDinec 3 жыл бұрын

Shred your old benchys and then make filament out of it that you use to make a giant MASTER BENCHY!

@FranklyPeetoons 3 жыл бұрын

Another great video. But when it got the price of this machine my heart stopped for a few seconds. My 1997 Toyota cost $2000 when I bought it used fifteen years ago. Cars are my benchmark for "expensive items". (My car still runs perfectly with zero maintenance)

@garfieldwithissuez 3 жыл бұрын

That would be a really cool tool to use when trying to come up with a high strength PLA+ for 3-D printing firearms. And honestly for those of us in the United States who are already fairly deeply adjusted in firearms in general 5000 isn't really going to break the bank. Wonder is CTRL+Pew knows about this.

@henninghoefer 3 жыл бұрын

I'd love to see you try out different additives or mixes of raw materials (instead of just colors) to see what blends give special properties.

@CNCKitchen 3 жыл бұрын

Oh yes, that's a huge topic, especially if you want to fight the degredation of the material due to the remelting process.

@sbernd78 3 жыл бұрын

Ich denke, dass das verarbeiten von geschredderten Prints alleine schwierig wird. Ich kenne in meinem Kunststoffverarbeitenden Kundenkreis kein einziges Unternehmen, das 100% geschreddertes verwendet. Es wird immer mit bestimmten Mengen frischem Material gemischt eben um eine homogenere Verarbeitung zu ermöglichen. Ich würde auch die Mischfarben nicht entsorgen sondern separat wickeln. Um sich irgendwelche Werkstattsachen zu drucken reichen die doch locker. 😉

@CNCKitchen 3 жыл бұрын

Guter Punkt, ich hab' auch schon Gemische verarbeitet, wenn das Grundmaterial jedoch gut war, dann ergab sich daraus kein gigantischer Unterschied.

@sbernd78 3 жыл бұрын

@@CNCKitchen Mein Filamenthersteller (eher eine Manufaktur für Industrieware) hatte mal sein Interesse geäußert so eine auf einer Kompaktmaschiene extrudierte Spule durch sein Messgerät laufen zu lassen. Das musst eben nicht nur den Durchmesser sondern auch die Rundheit, die ja ebenso wichtig ist. ;-)

@hugotoscher4734 3 жыл бұрын

Nice new intro

@RC-1290 3 жыл бұрын

I'm looking forward to the next video. Given that you mention that it's tricky to get consistent feeding, I wonder if it makes sense to turn the first filament into pellets of a more consistent size, before doing the final extrusion.

@Awrethien 3 жыл бұрын

@Lassi Kinnunen 81 is right, so I wonder if you can mix in recycled with new pellets to improve the printing quality and make feeding more consistent.

@odw32 Жыл бұрын

I don't think this is feasible for most people at home due to the investment price, but it would be awesome if some central locations (schools, makerspaces, libraries, city recycling centers) had these. You could throw bags with failed material and empty spools into sorted bins, and they could have a little shop where you could buy 2nd hand filament spools at a reduced price.

@DrunkAncestor 3 жыл бұрын

Recycling filament I think is the next "killer app" of 3D printing... I think what that looks like in a pragmatic way is a combination of more dynamic printing systems (print heads and printers that can adapt to material in realtime) and of course access to filament extruders

@rexxx927 2 жыл бұрын

W and H ,Reinhold are extruders manufactures from your country they make good extruder equipment large but good for 40 years

@speeddemon1774 3 жыл бұрын

You should try extruding CF/GF Nylon and report back the quality compared to commercial PA-CF filaments. If it's comparable at a fraction of the price, this can be incredibly valuable for people printing large strong parts. Also, see if you can get your hands on MIM pellets for powder metallurgy. FabMX in Munich is making an open source MIM pellet extruder, but if you can just extrude those into filament, it might be an even better option, and also a good alternative to the face-meltingly expensive BASF Ultrafuse 316L filament.

@hoyinching9313 2 жыл бұрын

Very helpful, thank you. I am really interested in recycling PLA Filament. Sadly, we can not mix other polymers. Mixing wrong polymers cause the wrong print.

@licensetodrive9930 3 жыл бұрын

I'm curious to see if TPU & PETG can be blended together for a more rigid material, kind of like PETG that doesn't snap if bent too much, just bends.

@TonyGrant. 3 жыл бұрын

To get better consistancy with your recycled filament, you could recycle your plastic into spools, then cut them up into pellets and re-recycle them into new spools.

@joshua43214 3 жыл бұрын

You probably need to do the same thing with recycled prints as you do with recycled aluminum. Extrude it into ingots (pellets), and then then use that for the final extrusion. Making an intermediate both homogenizes the material, and "cleans" it.

@charlie_lee_rhee8866 3 жыл бұрын

I wonder what will happen if you grind the scrap prints into a powder? I think that will take care of the inconsistent feeding problem, but will it clog the feeder?