If your dash still goes to the trailer setting then the backup sensors, and the auto start stop will not work.

First and foremost, I was getting the warnings by just plugging the four flat plug from the light-bar (default setup) into the side of the 7flat tow package plug on the back of the back of the truck. So then, I rewired it directly to the towing plug as the video instructed in the first 10 minutes while laying in gravel sweating my ass off for 40 minutes. And then wouldn’t you know it yes they did modify the video! But at the very end of the video after I had already rewired everything per the video instructions. I had no reason to watch you put a tailgate on. So now I am supposed to rewire it to my tail light? Even though there’s no guarantee that the warnings for the trailer hook up and “rear signal fault” on my dash will even go away!? How about this. If that doesn’t not work can you please make another video (just for me “Mike”) of some more wires I can cut in half and then put back together on my truck. Can we do brakes instead? Even with the alerts I get everyday, I have a truck with a bunch of cut wires put back together again and you want me to do the same thing but instead to the taillight!? You guys should probably do longer trial and error phases with product prior to making instructional videos for owners to chop wires up like Edward ScissorNuts only to be left with annoying issues. Lastly and most importantly, when adding a modification to install or any change At all, don’t do it at the 10 minute and 45 second mark into an 11:00 minute at the 10 minute mark vireo and in this case I consider it pretty important your video, how about you do it at the very beginning and not wait until the very end or some people are just finishing. That was a bonehead move. Your videos sucks, and the Beavis and Butthead music needs to go.

They certainly make things A LOT easier!

Leave lots of extra wire as you will be redoing them hopefully the correct way in under a year.

@@cjponyparts tail lights is legal?

Look at the connection cover on your truck, most tell you which is which.

I'm sure it won't hurt but I don't think that's necessary.

What do you suggest? They are quite handy but is there a more weather proof quick snap system thats just as quick?

I got a trailer code and it shuts off my backup sensor. How do I fix this?

Yes, wire it into the tail lights instead of the trailer harness. You will have to use a multi meter or a test light to figure out which wire is which.

Yes, they do, it's called CURT 55384 Replacement Vehicle-Side Custom USCAR 4-Pin Trailer Wiring Harness. I purchased it from Amazon.

Jay Spaulding which part # did you buy? There are 2 different putco taillight bars?

u r right puts it in trailer mode and fucks up your back up camera.

Same with my ford ranger 2020.. my back up sensor turn off as it detect a trailer

You have to tap the Light harness in the tail light housing. You will have to run 1 wire to right side for right turn.

Out Raptor had that feature and the light bar did not fit, Putco has told us they were working on a solution. - Bill

CJ Pony Parts so even if I used the brackets that come with the kit the light won't clear the bracket on my truck?

CJ Pony Parts I took my bracket off my truck since I don't use the tailgate step. I just don't know if I need any other wire kit or if I can just wire it like in this video, I just don't want my truck to think I have a trailer hooked up.

Carlos Doimeadios I bought the 60” first, then returned it and bought the 48” version which fits beside the bracket.

613Stuart Hey thanks for the feedback. Any chance I can see a pic of how it turned out and looks next to the bracket? Thx

Carlos Doimeadios sure I’ll take one for you when I can.

duramaxfl no it doesn't. And it's brake, not break.

😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂☮️

it does not. it goes through the grommet above the bar

YES!

odd fredrik johansson the brake light wire duh?

odd fredrik johansson sorry man. I didn't watch all the video before that previous comment. I see what you mean. Take a test light clipped to a good ground and test the plug going to the bulb. Have someone help you apply the brakes and check until you light your test light. Don't pierce the trucks wires to test or fix the hole in the insulation if you do. Bare wire(s), such as using the "scotch locks" will lead to corrosion later on.

It rocks! Lol

I agree double annoying, to both my ears

Ditto

We used what was supplied with the kit, you can of course use which ever method you prefer.

Agreed.... Don't know where they are though.. maybe they dont have snow or DOT that puts down acid on the roads for snow..

Agreed. I cringe every time I see a video where they use them lol

I agree probably be better to just twist wires together and put electrical tape on it if I was using those switch lock

Scotch locks

As long as the 4Runner is wide enough to accommodate the 60inch bar it should work just fine.

Yep, me too. Did you figure out a fix?

That certainly makes it easier!

If you have the lane keeping system it takes a different Bar, also if you have a towing package and you connect the way they show the truck will see it as a trailer and shut down your lane keeping and Blis systems

Raju, Part# 92009-60 will work on 2015+ Ford Trucks with LED Taillamps/Towing Package/Lane keeping sensors.

Alfonso can you still plug it into the tow input? Or do you have to hard wire it?

Yes, You don't disconnect the tow connection

More visibility mainly. A lot of people, including me, like the way they look too.

Yes they look good. You don't know what your talking about. Your just jealous because you can't install one yourself or don't have a truck to put it on. They won't fit on a Hyundai.

Sigh..... there is a common theme among ford owners I have noticed... they tend to have really simple minded come backs that usually make them sound as if they are in kinder garden still.

Tt Ss Kinder garden?? Lol. Maybe you should check back with “kinder garden” and learn how to spell it. Rofl.

Or maybe it was an auto correct error that I just didn't catch... gee the thought of that it on youtube is unbelievable! The again I tend to forget sometimes common sense isn't so common among most. By the way before you preach make sure your shit is up to par. Proper english doesn't use two ??