F11 Top Coat vs Mr Fix 9H vs a Professional only Ceramic Coating - 10 washes! Did it fail?

  Рет қаралды 13,281

Scott HD

3 жыл бұрын

This was a subscriber requested video - so here it is. Properly polished and prepped surface. Applied, cured, let sit for 24 hours. Washed TEN times (stopping to show you after first, fourth, and tenth washes). Let's see how they hold up!
My earlier video about F11 and what is in it:
kzfaq.info/get/bejne/pth5frGKysi5pnk.html
You can buy F11 here:
amzn.to/31Dy8HQ
You can buy MrFIX9H here:
amzn.to/3aef32W
SPS Graphene is a professional only coating so I can't give you a link to it unfortunately!
Products I used in most of my detailing and PPF videos - get them here:
CG honeydew Snow foam:
amzn.to/2TdjJOu
Foam Cannon we use:
amzn.to/2v6e5Wr
If you don't have a pressure washer, use this one:
amzn.to/3a2ytq8
Water De-ionizer:
amzn.to/3a6A3XQ
Forced Air Dryer:
amzn.to/2PpDaCy
Electric Pressure washer:
amzn.to/3a3RYOX
MTM Hydro pressure washer nozzle:
amzn.to/2w1jX3c
MTM Hydro pressure washer lance:
amzn.to/2SXeJOO

Пікірлер: 60
@dohpredator
@dohpredator Жыл бұрын
you should not be comparing a sealer to a ceramic coating your a joke
@ScottHD
@ScottHD Жыл бұрын
I'll pin this comment, just for you. :)
@kentpachi143
@kentpachi143 Жыл бұрын
lets be honest here, people buy it for the purpose of protection and a dollar ceramic was doing way better than an expensive temporary like 10 wash topcoat
@1515alanruiz
@1515alanruiz 8 ай бұрын
Change your tampon
@waiwong1304
@waiwong1304 3 жыл бұрын
Placing the panel in an upright position really shows the difference. Thank you yet again for showing us these little tricks.
@ScottHD
@ScottHD 3 жыл бұрын
That's why they do it!
@alainmayandoc
@alainmayandoc 2 жыл бұрын
I'm impressed with Mr Fix 9H, It's cheap but it works!
@andrew879ful
@andrew879ful 2 жыл бұрын
For something on a budget I agree
@stephencarbonaro5462
@stephencarbonaro5462 3 жыл бұрын
You are officially my hero! This is great!
@ScottHD
@ScottHD 3 жыл бұрын
Thanks!
@fieldcar
@fieldcar 3 жыл бұрын
Now the real question is; How do I break it to my friends that they got duped by buying into F11?
@ScottHD
@ScottHD 3 жыл бұрын
Step 1) show them this video.
@TheBooklas
@TheBooklas 3 жыл бұрын
Step 2) show them the video again.
@jmj_d5207
@jmj_d5207 3 жыл бұрын
You can't hypnosis is strong on that one and sad part $60 bucks for 1 bottle 🤑
@wjrneo2
@wjrneo2 3 жыл бұрын
Man, that 8-bit muppet guy at 8:02 is really angry that F11 failed so bad.
@hartlanddetailer5670
@hartlanddetailer5670 3 жыл бұрын
Thanks Scott! I appreciate you!
@ScottHD
@ScottHD 3 жыл бұрын
Any time!
@93ORyan
@93ORyan 3 жыл бұрын
I tried typing a comment on the F11 add on facebook explaining that a 10 dollar meguiars spray wax will get better results at such a lower price point and everyone told me I was talking nonsense, wonder how they'll react when they see this video.
@ScottHD
@ScottHD 3 жыл бұрын
The F11 fanboys apparently haven't seen this video yet.
@Pantfoot
@Pantfoot 3 жыл бұрын
These types of tests don't take into account how F11 wants you to use their product. You're supposed to use it almost daily, order a new gallon every week, and only admire your car from ten feet away. That's where this stuff really excels. If you follow those steps, you and the company will be very pleased.
@ScottHD
@ScottHD 3 жыл бұрын
Haha... at $300 a gallon too!
@dave.barker
@dave.barker 3 жыл бұрын
😳🤯💪🏼🔥 Awesome video, thank you! Funny side note, the advertisement before the video was for F11 🤣🤣🤣🤣🤣
@ScottHD
@ScottHD 3 жыл бұрын
Thanks Dave!
@PeteyMcSavage
@PeteyMcSavage 3 жыл бұрын
Anyone who buys F11 should ask for refund
@ScottHD
@ScottHD 3 жыл бұрын
I should try. LOL
@antonispanonidis5773
@antonispanonidis5773 11 ай бұрын
You are awesome congratulations for all your videos. What is the best way to apply mr fix ? With some sprays of water or dry;
@ScottHD
@ScottHD 3 жыл бұрын
*date August 11 2020 not 2012! LOL
@tonyiy7223
@tonyiy7223 3 жыл бұрын
Scott you honestly are the best! You saved me money! What in your opinion is the best ceramic coating that you have worked with? from best mid/price cost ceramic coating and high-grade/high cost ceramic coating? Or what's your best of the best?
@ScottHD
@ScottHD 3 жыл бұрын
Ceramic coating that you can buy that isn't professional only? Cquartz UK 3.0.
@VooNCZT
@VooNCZT 3 жыл бұрын
@@ScottHD , great video as always :) . I believe that UK 3.0 can easily compete with professional coatings even it's rated consumer coating.
@SharrodVisuals
@SharrodVisuals 3 жыл бұрын
Could you do a Armour IX vs the professional grade SPS
@senorstrike2852
@senorstrike2852 2 жыл бұрын
that Mr. Fix is quite surprising!
@edwinlopez8324
@edwinlopez8324 3 жыл бұрын
Light as well put armor all on your paint
@firsl9467
@firsl9467 3 жыл бұрын
What about those not in USA that wants to buy SPS Graphene?
@jerryhoschouer5076
@jerryhoschouer5076 3 жыл бұрын
F11 blocked me on social media lmao
@ScottHD
@ScottHD 3 жыл бұрын
Same!
@tobybyler688
@tobybyler688 3 жыл бұрын
Haha same
@autovageris
@autovageris 3 жыл бұрын
how long was waiting after coating?
@jaredstueckel2649
@jaredstueckel2649 3 жыл бұрын
I tried f11 nearly 2 years ago and could tell it was gone after just driving through a hard rain. Their one video of it removing bugs is false too. Tried that everyday on my semi truck with extreme effort and it never got all of them off lol.
@ScottHD
@ScottHD 3 жыл бұрын
You're not the first one to have that issue.
@jaredstueckel2649
@jaredstueckel2649 3 жыл бұрын
Scott H it was after that experience I searched for independent product testing and found your channel. I just can’t trust any companies advertising.
@derek723
@derek723 3 жыл бұрын
This video has me thinking...are these extremely hydrophobic coatings potentially worse at keeping your paint swirl free? Say you've pressure washed a coated panel and there's still some dirt you can only remove by agitating. When you clean a surface, we know you typically want as much lubrication/water as possible in between the surface and your wash media. I'm curious if these extreme hydrophobic properties of modern coatings are inherently fighting against our attempts to introduce lubrication to the panel, and thus increasing the risk of paint defects. I might have to test this.
@ChrisL-rh7io
@ChrisL-rh7io 3 жыл бұрын
Isn't SPS graphene a graphene coating, not ceramic?
@ScottHD
@ScottHD 3 жыл бұрын
Yes and yes. I was going for "high end professional coating". Ceramic or Graphene...not important for this test.
@sadatmahmud1198
@sadatmahmud1198 3 жыл бұрын
Use veteran 9h, it works better then mr.fix in same price
@danielw5516
@danielw5516 3 жыл бұрын
What's between f11 and Control. ????
@ScottHD
@ScottHD 3 жыл бұрын
Exactly!
@danielw5516
@danielw5516 3 жыл бұрын
I don't know the language, I'm watching but I don't understand anything and the description doesn't say anything between f11 and Control. what can it be Kisho 901, Adams, cq 3.0 UK ????
@danielw5516
@danielw5516 3 жыл бұрын
is it some kind of secret ???
@XxVendetaxX1
@XxVendetaxX1 3 жыл бұрын
sps graphene coating professional
@ScottHD
@ScottHD 3 жыл бұрын
@@danielw5516 it is Mr Fix on the left. F11 middle. SPS Graphene coating, and then control on the right.
@BMGProjects
@BMGProjects 3 жыл бұрын
Finally the truth about F11!!
@eddiel7033
@eddiel7033 3 жыл бұрын
I know people who still swear by F11. Dupes!
@ScottHD
@ScottHD 3 жыл бұрын
Blows my mind.
@Brees1986
@Brees1986 3 жыл бұрын
F11 is pure crap.
@Nick210
@Nick210 3 жыл бұрын
That is putting it nicely