I work for Eaton (specifically in the prototype sector) and the supercharger rattle is a common problem. The bearings and everything inside that blower were more than fine, but the couplers are known to wear out and rattle. For anyone who runs into this problem, just replace that coupler. Its a lot easier, much cheaper and designed to be serviceable. Edit: Removed top part. Obviously a lot of ppl have seen this. Best wishes everyone and thanks to BIFB for the quality content!!!

Does anyone else miss the days of OG Chris, you know the Chris that would spend the first 30 seconds of the video telling us with great confidence what he thought he was going to achieve in the video, followed by us watching 30 minutes of him not doing it...

Should epoxy the garage floor. Cement floors give off a ton of dust.

Chris: We are gonna fixe the 4wheel drive locker Also Chris: By we I mean Oscar

As long as you don't look at those door gaps... Turned out good 🤣

I think he missed the lights on the grill.

DIY helper tip... wear a fresh tyvek suit to work in. Your clothes have super fine silicates from your laundry detergent. Just standing around them after the final clean will shed those onto the part causing pin holes in the paint.

That front end looks awesome now that it's painted! But i think it really needs a new front bumper to finish the look! 👀

It looks awesome! But what about the 3 little lights that are on top of the grille? They need to work!

Finally, been waiting with my instant noodles for this.

The bottom bulbs on the headlights are the high beams 😂

Hope he remembered to wire in the 3 clearance lights in the grill.

That paint job is bananas good, well done!!!

Guys, 1.39M subs 👏🏻 I’ve been here since 17,000

I think you guys did a great job everyone critiques every little thing like the door fender gap and the three lights on the front that nobody knew if they worked or not . Remember this is a shop truck to work out of not a show truck and from day one when you got the thing its definitely way more awsome id be proud of it man . You guys rock love your content .

Great job. That blue looks awesome. 👍 BTW. I like the new look but a direct comparison before vs. after would have been nice at the end. I'm just nitpicking.

Oscar is amazing. Everyone needs a Oscar.

Definitely should try to fab the 17 bumper on to the front as well it'll complete the look imo.

i mean you have to love how much work they do themselves. painting fabricating troubleshooting. especially when you see people with way bigger shops sending a ton of stuff out to do that stuff.

That fender to door transition looks like it is just asking for water intrusion... Did he address that somewhere and I missed it?

This show should be called " O is for OSCAR" the man that always comes throw .

Body gaps look horrid from door to fender from what was shown. Kinda disappointed and curious why that wasn't shown more.

I love how you guys use cheap harbor freight tools and still do such a good job.

Things haven’t been the same since elenor

Before you compound the bonnet (hood!) you need to sand the dust nibs with something like 2000 grit wet n dry paper. Plenty of warm soapy water, knock the nibs off, then a quick sand all over, then buff, and the results will be awesome.

I would’ve sanded that better, all repair areas in 320 then spot high build primer and then final sanded the entire parts flat with 400 then 600. After sanding hit all edges with grey scotchbrite to ensure a proper mechanical adhesion, then a wet on wet coat of sealer and base, finish off your base coverage and clear coat, I always use a slower reducer than what my ambient temps require which will allow it to flow a bit better and don’t have to worry about it flashing off too fast. Slower is always faster when painting because you avoid mistakes and allow the paint to do its thing, definitely getting better with your painting. I’d suggest taking a certification course with the paint manufacturer you use the most, helped me out a ton to learn from the manufacturer how to best apply their products. Turned out great.

spray on "Evenly Dirty " could be a B brand product opportunity lol

I think you wired in the high beams when driving home from the restaurant if I’m not mistaken (which is why they’re so high, they don’t need adjusting)

That truck came out great!!! Awesome job! Nothing cooler than a supercharged ford raptor!

Nice, a car channel doing car stuff - crazy right! Upgrade looks awesome, I would of colour matched the wide fender panels seeing as you had the gun and paint out anyway but solid job.

so im commenting this while you where doing the body work. but im pretty sure the beam thats closer to the hood line is actually the low beam and the lower one near the bumper is the high beam. ive yet to work on a gen 2 raptor but thats how all the modern f150's are so id doubt they'd do something different that may be why it was blinding other drivers

Looks great! I love that blue color and am happy you kept it!

Love front end swap on the Raptor looks awesome awesome job! So glad you went with the blue. I love that ford blue!

The conversion looks good when you can't see any other part of the truck lol. Definitely does not go together. That fender to door is bad.

The Truck came out great I would love to upgrade the front end of my truck but that looks like more work than i'm willing to put in but great job guys!

Cool results. May i suggest adding connectors for the head lights. Just to make them serviceable. Some delphi waterproof ones

You should use grey scotchbrite with a rubbing paste after using the 400grit. Two benefits, evens out the sanding scratches (so you don't see the finger marks) and cleans the panel at the same time.

Man I remember the old projects you guys tried to paint and man you guys have come a long way cool to see congrats guys

Great to see you finally get some good results with paint... I have been really avoiding some painting, this gives me more confidence.

Finally! I've been waiting for this episode forever! Good job guys. Have you considered adding some matching male + female plugs to the headlight harness so you'd be able to easily disconnect if needed?

The final product looks awesome!

Are you ever gonna replace that right front rim? its a shame to do all of this work and not fix the rim.

That's a good looking update to the truck. Nice

I'm really excited about the boat as much as I'm bummed about it getting the ls swap

Yeah, I could not live with that door like that, but it's not my truck so as long as your happy with it Chris.

Can’t wait to see the Raptor going offroading🔥

What a nice result, congrats B

lmao you just nail it for using the high beam heading home!

I’m very impressed with how thorough you guys were with that headlight replacement job. Good job is for build! 😂

Looks great, looking forward to watching the next step in the boat re-power.

The fitment between the fenders and doors are not nice.

Love the new look, great job as always. Seems like you need a little more ventilation in the booth :)

"soapy wooterrrr" LOL Love that

@ChrisFix They used SOAPY WOODER

You missed a perfect "Wax on, wax off" at 12:48 haha xD

Maybe oem rims? And a new inter cooler? Maybe 🤷🏽‍♂️ but Raptor looks amazing brotha great job 🙌🏽🔥💯

I'm a little late but the light beam was high because those are the high beams. The top ones are the low beams.

Glad you kept it blue! Awesome job!

You should connect those raptor lights (grille) for the complete 2017 look

As far as your clear coat, try using a slower activated and reducer to increase your recoat window.

I totally thought the specks in the light on the hood were part of the metallic paint lol Love the progress, great looking truck.

I’m gonna do this to my 2008 ford f150

21:11 “boat, boat” lol

Raptor looks great. Really like the Blue............

raptor front end upgrade turned out awesome!

The face lift looks really good is there a such thing as a truck bed lift because I think it would look very nice with the 2017 raptor tail gate and truck bed

I will do this front end conversion when I find another cheap gen 1.

Loving it 💟

B is for Build is the best channel. Have a good day 🤘

I think this was your best paint job ever!

Get it wrapped if you are set on the grey. Personally I love the blue.

Everyone is way to sooky in these comments lol how many of you have actually done a conversion the same as this, done a better job and got everything perfect first go? Good work B is for Build team, killed it again

Turned out really nice guys. Great job.

“You fixed it Oscar! Good jog Oscar! “

Cannot wIt for single seat shows to be back. But with sema canceled. Plenty of time for that. The boat build is great. Can not wait to see all the upgrades to the B is for Boat.

I wouldn't have sold my old one if I knew this! Pretty cool!

Chris, you should have gotten tiny wheels so it would drop the truck significantly allowing you to paint inside.

8:00 in it's "OK GUYS, this time we in other Chris's garage" XD

Nice, congrats!!! (That bumper... mmmhm)

Nice "Soapy Wooder" reference! lol

Looks great guys. Good tips for us DIY painters👍

How is the fitment between the doors and fenders???

I think the top bulb is the low beam. You wired the high beam on.

coat your paint booth floor it will help keep the dust down.

Guess what everyone, Compounding in fact does not remove dirt from your paint job. Turns out you have to actually sand it first. Wow.

Would have loved it if u did the whole car in the grey. ! Would have looked sick !

Looks awsome chris I would much rather have this beast than one of the EcoBoost v6 raptors the rumble of a V8 never get's old!

I'm not a truck guy normally, but it does look handsome.

You only missed one thing. The grill lights. Gotta put them in. Its the raptor look.

I could be wrong, but the bottom lights are brights I think ?? The low beams should be the top lights.

I don’t know a whole bunch about cars, but I do know Oscar is the star of this channel.

That hood has a bunch of tiger stripes

Awesome work but I think if you Replace the doors with the new ones Will be nice

Just planned to check bisforbuild and here we go :D nice

Looks really good. Oscar you da man

I really need an Oscar

While the fenders were off they should have added a snorkel. Having the cold air intake inside the fender on a off road vehicle is just asking for trouble.

He said “the green hurrican is outside” and I went oh shit that’s right he has a fully functioning super car.... wait.... where’s the Evora?!

Love the random life jacket on the floor

".....pretty dry to the touch" *taps fender, leaves mark* :-) hahaha