In the final segment of the Corsair series, the paint comes off and oils are used to fade the paints.
Пікірлер: 42
@MaxAfterburner2 жыл бұрын
Fantastic job on the Corsair and you make a fine presentation. Your models are definitely at the level of a serious competitor whenever entered into a contest! 😎
@TheModelGuy2 жыл бұрын
Thanks bud :) I like mine to be beaten up since it goes against a lot of what the aircraft modellers tend to think. For competition though it has bitten me when I hear “airplanes don’t get that dirty.” You’ve been around -16s and know what they can look like :D
@GatoCurioso-013 ай бұрын
great job, thanks for sharing...
@sickfarce62752 жыл бұрын
I'm one year into the hobby and I have beautiful, chipped, but otherwise pretty pristine looking Tamiya 1/48 Corsair (just one colour, the very dark gloss sea blue) sitting on my shelf and I really want to get into weathering with oils on this one. This video will come in super handy!
@themagnificentmackrel65052 жыл бұрын
great work and informative video!
@frederickthompson86862 жыл бұрын
Regarding scale, 1/32 really gives a pro like you an opportunity to demonstrate your skill!
@TheModelGuy2 жыл бұрын
Thanks Frederick. It also is more challenging because things are much more visible that wouldn’t be in 1/48
@einefreunde2 жыл бұрын
Next level work
@foreverplastickits1382 жыл бұрын
*So interesting weathering step by step video! Thank you so much!*
@twrea2 жыл бұрын
Great video, most of the real F4Us I have seen that have not been refinished had a red-pink metal treatment vs the yellow zink. Some old photos of the time also show this as well as the yellow which used in frontline repair..
@TheModelGuy2 жыл бұрын
My understanding is the earlier ones have that salmon primer colour and later on in the series it went over to zinc. My birdcage I did four years ago had the pink tail wheel well
@anthonypfannenstein48942 жыл бұрын
That's bad ass man! Looks like I'm looking at an actual for real Corsair here. Great work!
@dnovello2 жыл бұрын
Incredible work and excellent instructions
@thedamienharveygroup70142 жыл бұрын
Really beautiful job. I'm about 3/4 through and your tips for weathereing come at a perfect time. Thanks for making the video(s) dh
@Colin3992 жыл бұрын
Stunning work
@mr.modern44192 жыл бұрын
Fantastic build!!! Great work. That chipping is remarkable!!!!
@keithm.4042 жыл бұрын
My tamiya 1/48 corsair was waaaaay dirtier than this one! Beautiful build sir!
@fotomakr2 жыл бұрын
Like the oil work and sun bleaching effect you achieved.
@SprueFascinationChannel2 жыл бұрын
Nice job 😊👍
@Maddog-nb9vu2 жыл бұрын
Great job.
@steves11120002 жыл бұрын
For those who don't think that these aircraft weathered this much, I would refer them to pictures of aircraft flying from Henderson field, or marjuro field as a place to look. The birds were in primitive conditions. The crew chiefs and mechanics did the best they could. But, at the end of the day, the amount of weathering you add is up to you.
@johnking63982 жыл бұрын
Nice video very well done 👍👍 It will help me with my one I now it's not the same kit but I can try out oils
@amc83942 жыл бұрын
Gran trabajo magnífica maqueta 👏👏👏👏👏👏👏
@dbenci2071 Жыл бұрын
wish you would add the pilots, I enjoy the quality of your work
@TheModelGuy Жыл бұрын
Maybe on the next one :)
@jlesquer2 жыл бұрын
What a great job! It's just impressive, I wonder how long took you this build
@markmingard68822 жыл бұрын
Wow, you never fail to impress! Stunning build, paintwork and weathering I can't compliment this build enough! Any chance we could see a 1/144 airliner or large 1/48 or larger helicopter? Would really like to see you detail those sorts of kits! Regards from the UK
@TheModelGuy2 жыл бұрын
Thanks Mark! I have a 1/48 Sea King in progress to be built as a CH-124. I’m also using it as a 3D printing test bed so it will be next year in editing. I’ve designed the winch and internals since it’s empty. I have progress shots on my IG and Facebook accounts. And for a large 1/48, I have the Kinetic Greyhound. That will get the same 3D love
@markmingard68822 жыл бұрын
@@TheModelGuy Excellent! I've got the 1/48 Sea King to convert into the RAF HAR.3 SAR variant, will be interesting to see how you approach the build for reference. Also my personal favourite helicopter, we have a few flying ones in collections over here in the UK, as a new helicopter pilot I'd love to get behind the controls one day. Would you say a 3d printer is essential for modelling? I'm trying to detail my kits but paying off flight school fees I can't really justify the cost of a printer at the moment!
@TheModelGuy2 жыл бұрын
@@markmingard6882 A 3D Printer is a nice tool to have. But it’s only feasible if you are printing a lot of stuff. I wouldn’t say it’s a must have. Just make friends with someone who has one lol
@TonyJ862 жыл бұрын
Excellent work on the corsair! I'm just wondering though, after the oil weathering process do you then put down a varnish or leave it at that? I just spent a bit of time weathering up a prop for a desert P-40 I'm working on and then it was all lost to the varnish coat! Lucky it was just the prop!
@davispen2 жыл бұрын
Excellent work. We watch the same channels. Did you put any kind of wash on the harness, as it looks a little clean, if you know what I mean?
@vmoney91062 жыл бұрын
Beauty. Really digging the streaking and dual layer chipping. How do you like oil based exhaust stains compared to painting them on?
@TheModelGuy2 жыл бұрын
I find the oil can bring in a lot of cool effects. Especially being able to blend them and layer them. Airbrushing can give you a very soft look but you need a very tight spray pattern to do it.
@stefancilliers35472 жыл бұрын
Hey Robbie Love your work, really enjoy your videos. I have one question if I may. When you say your “mr color zinc chromate” is lacquer. Do you use the GSI gunze range or do you use the standard acrylic mr color 351 and thin it with lacquer?
@TheModelGuy2 жыл бұрын
Hi Stefan, I use the Mr Color 351 and thin it with Mr Leveling Thinner
@stefancilliers35472 жыл бұрын
@@TheModelGuy thank you very much. So this might be opening a can of worms, so the Mr Color 351 is an acrylic based paint right? So in your opinion and this might be what I am thinking too is…; when thinning an acrylic paint like the 351 with lacquer levelling thinner do you think its more like a lacquer then in terms of durability?
@priceles74 Жыл бұрын
Would help next time if you actually told us what products you were using especially for the exhaust
@VilkaModels2 жыл бұрын
Hey Robbie, I have a question: why do you never build in 72 scale? Even something like the B-17 you opted to do in 48 scale, so I'm curious.
@TheModelGuy2 жыл бұрын
It's just not my scale. I know there are some nice kits in 1/72 but I enjoy 1/48.
@craigcampbell2428 ай бұрын
What type of paint brush are you using for the chipping?
@TheModelGuy8 ай бұрын
I believe thats a 000 army painter brush. Only comes out for minute detail