Falcon 120 build Segment-6 of 6
Рет қаралды 2,306
11 жыл бұрынThis is segment 6 of 6 of the Nitroplanes Falcon 120 airplane build.
@SixxKicks 10 жыл бұрын
Excellent! You are a true gentleman for sharing this with us! Thank you.
@tonypepper2460 11 жыл бұрын
Great Job ! Looks fun to fly, like the way you installed the ESC
@MrFabioFanti 8 жыл бұрын
Thank you for the tutorial very useful! I bought a Falcon 120 and a turbine K-80 and I'm looking to know about the CG. The ideal CG position is 330mm (13in) behind the leading edge measured at top wing center line. Unfortunately its did comes with the manual. Did you use this measure on your plane? Thank you and once again, great tutorial!
@MV_Checkmate 8 жыл бұрын
I did the recommended 13" back on the new Navy Flycat 120 and it's perfect. Don't forget to give ample down tilt to the turbine exhaust otherwise it will climb on power and dive on release. Good luck.
@matt7048 10 жыл бұрын
very cool. Was that jason making aileron inputs at 1:50? What kind of camera did you use airborne? And what was the ready to fly weight?
@MV_Checkmate 10 жыл бұрын
Yes that was Jason. The camera airborne is one of those little keychain cams. The flying weight is 13.8 lbs. and if flies like its 8 lbs. It lands so slow with full flaps that it's ridiculous.
@MV_Checkmate 9 жыл бұрын
Yes, Jason was the one doing the maiden for me. The onboard camera was a little keychain cam taped under the rear boom.
@tisoy909 9 жыл бұрын
Can I ask what was your all up flying weight with batteries on your Falcon? thank you.
@MV_Checkmate 9 жыл бұрын
12.5 Lbs
Nikita Zdradovskiy
Рет қаралды 7 МЛН
SYG DESIGNWORKS
Рет қаралды 345 М.
Pinkfong en español - Canciones Infantiles
Рет қаралды 10 МЛН
Maan Gaming
Рет қаралды 16 МЛН