What does it mean when it says t instead of L?

PSA for anyone watching this for 4.33. The TGP now defaults to training mode, you have to change it to combat mode in the ICP to actually get the laser to fire on targets. Learned this the hard way.

Thank you so much for your vids and taking the time to do them. I have yet to look at the manual and I am slowly, but surely getting up to speed via just your videos and a keyboard map.

Best tutorials ever! I try to read the manuals but get bored in seconds flat and don' understand half what is said. Having a video tutorial with a bloke easy to understand is so much better.

Thanks again, for all these great tutorials. Most EXCELLENT!

Damn, you really explain things well. I'm just looking at getting into BMS. Quite daunting but it's tutorials like this that will make it possible + forum.

Very good video. Like the other Falcon BMS Tutorials. You explain everything very accurate. One suggestion for other pilots. If you switch to TGP MFD and activate Area Mode, use the following keys: Keys in Falcon BMS DMS: Display Management Switch DMS down = Shift + Num 2 = switch MFDs TMS Up = Ctrl + Up = activate Area Mode Strg F3 / F4 = zoom

All your tutorials are great,and thanks for info its awesome.

Thanks man, you have some really great instructional videos bro, prob the best on here.

Great video and easy to understand presentation!

Another nice video. Was not covered in the original Falcon 4 manual. Now I will put the TGP in my datacartridge :D

the white dot is simple. its a bird's eye to where the TGP is looking (your plane being the center of the screen). example of this look at 17:20. the white dot is at between 12 and 1oclock off the center of the screen, and then you look at the HUD and the TD is right there also.

Great video once again. Thank you for your job.

i worked it out, it was pretty much explained in the vid, the reason its moving around so fast is because you are targeting with the radar, not the pod. So you need to make the TGP the sensor of intrest, or SOI. so if the TGP display says, NOT SOI then press DMS down (or up, i cant remember off the top of my head) and it will change it to the TGP. (white box around display) then it will move around perfectly and enable you to zoom in and out! very satisfying! it will work in CCRP or CCIP.

Yet another great tuto !Many thank´s !!! Keep them coming... ILS-WDP-RADIO-MISSION BUILER... ;-)

Keep doing these video`s man, they are very helpful =)

Great video. Thanks.

@stav2010 It's hotas binding that changes sensor of interest - the default key is alt-ctrl-down

@CaptainPaul12 Yes, it's because you are suddenly shifting 1000 lbs off your wing and the aircraft has to be corrected for that - sounds like you were using gb24s. If its spinning left, you need to trim the right wing down. And vice versa. The trim panel is on the far left side of the cockpit. Can also use the keyboard shortcut alt + arrow keys where the arrow key is the direction of the trim. If spinning left, hold down alt-right arrow until it stops spinning.

Excellent... Thanks

@Kirq It is Falcon 4 BMS.

@CaptainPaul12 In the video this doesn't happen because I was using gb-12s, the 500 lb variant. I originally did the video using gb24s but it took like a minute to trim my aircraft so decided against it in the final video.

Yes, if you wanted to you could make a steerpoint by manually putting the lat/long in using the ICP, but i'm not sure why you would do that if you can just use a markpoint, which is why I said that in the video.

@tanit Thank You. I have to finally buy it :)

thank you!!!!

yes you got right thank you ! :)

@victoraochoa It's because different users use different base input layouts or whatever I should call them. There are two by default with BSM I think, so you just have to find whatever button it is for you in the settings.

The GBU12 is not 1000 class bomb, its 500 lb. And also one point to throw in there, not all GBUs are laser guided, The GBU-30, GBU-31, and GBU-32 are all GPS/INS guided. You probably already know this, but im just making it clear to the people watching. Great video and keep up the tutorials!

Krause I'm going to blow you up with ideas; if you ever need a noob to use as a punching bag, you can direct me. I'd like you to do a guns combat tutorial( not ACM) just go through the various gun sights. I'd like you to do a ripple tutorial, or an overall WPN/ SMS tutorial. I'd also like to see you break down ramp starts for the ancillary aircraft, like the harrier and the eagle. You could also tackle a big ask, which is the little known "secret" HOTAS callbacks you know, like double tapping tms down for slave tgp, holding tms up for the head mounted bore sight, etc etc etc...I know you probably know some more lesser known controls. I'd also just like to see you make more vids of fragging. You're an awesome dude, with a keen and unique insight. I enjoy your book reviews and your readings of the classics as well. I hope you have a good day, if you want a new mil sim nerd with thick skin to shoot at and ridicule, let me know,😎

@Kirq Nope, it's the original falcon with BMS 4.32 mod.

From what I can see watching these videos (not just this one), working with the TGP etc is surprisingly different from in the A-10C (DCS). For example in the A-10 i rarely even use the AGM-65 to find targets just because the image is so poor. Most of the time I will point at targets using the TGP and then slew my Mav to w/e the TGP is looking at. Also, is there no point mode for the TGP? Keep in mind that I'm just getting started with Falcon BMS. Edit: Just realised you already pretty much answered my question earlier in the comment section, not being able to set spi.

If you explain that the white dot represents the position the lense is looking at, relative to your position, it isn't hard at all to explain ;)

Click mark on the ICP until it says TGP, then press tms up. You will now have a markpoint (steer 26 is the first) of that position. Then make the HSD SOI, select steer 26, and press right ctrl-p and it'll transmit that steer to your entire flight.

Thanks for all these Tutorials, they help me a lot, keep them going! a buddy-lasing tutorial would be great... Here are some minor faults i noticed,they are not really relevant but here they are: 7:27 Radar Altitude not barometric, u mention it when referring to the HUD though 23:30 GBU = Guided Bomb Unit not necessarily laser guided,JDAM´s are also GBU´s,

@mininow You need to press DMS down to select the TGP as SOI

nice

@therealgsicht Yeah I don't go off of a script so I tend to make some gaffs. Not worth re-recording though.

@riscfuture Sure and you have the position of the plane following

The default bind is alt-ctrl-down arrow

you need to watch this video again !

So there is no true HOTAS button to actually zoom in and out? Keyboard he said I think is Cntrl and f4 and f5

You should pre-configure all your MFD modes BEFORE you get on the plane. (On the flight-plan screen, with the map, the cartridge symbol is on the right down side.) Use the cartridge function to save your configures, so you can transport them to the cockpit. Otherwise, you have to configure your modes in flight.

Hi, Can you explain how to use GBU-15? I managed to fire it same way as i launch a Maverick - power it up, wait for it to power up , remove cover with "u" lock and fire. However, I lost visual image as soon as it was launched. Do you think it is possible to keep visual link after launch? On the reference for this bomb it says link should be kept but is it possible in BMS? Another related question it hot do i slave it to TGP? Thanks

Is there a way to have the plane automatically trim ?. As soon as you release the weapon the plane goes into a severe roll. I know how to manually trim the plane out ,but it's very tedious to have to mess with that all awhile maintaining situational awareness and destroy more than one target.

I'm also unable to slew TGP camera. I have selected it as SOI and TMS up, Then it says "IR MODE LM". But what keys/buttons do i use to move around?

I can VID an f-16 at 30 nm's out with the tgp: with tgp soi fast tap tms left twice (under 0.5 secs) and you change to the tv senor of the tgp. In tv mode the magnification is much higher. Then zoom in your tgp up to x4 AND then zoom in your view towards your tgp mfd. You will be able to see him and id him, he will be small thats why you have to zoom your view but you can see him nontheless. Very important if you want to take advantage of the long range of your amraams. Always declare with awacs and raygun though! happy hunting!

The first couple of OCA missions i did everything went smooth. But now when i set up the TGP on the mfd i get a T instead of the L for the laser and now my bombs are missing the targets by a mile. I havent done anything different in setting up the TGP. Ive watched this video a thousand times and im still getting the T instead of the L on the mfd. Any ideas why this is happening? Cheers Kirbs

DMS down to switch it to SOI then TMS up to go into area mode.

how did you slew the TGP once it is selected as SOI? not sure what the default keys are for that.

Hi Krause,do you have any tutorial of how buddy lasing works,we flew in direction of targets ,my wing locked the target and strat to lase it ,i went to LST mode with my TGP with Laser activated ,TGP went to search mode but nothing happends and yes we had same laser code?!what are we missing?!thx in advance,grettings from Croatia!

In BMS 4.33 (which I know you said may not be supported by these videos) why does the IR Point say IR Area T and not IR Area L?

I didn't read all the comments so Im not sure if it has been corrected, but GBU-24 is a 2000lb munition.

Wish ppl would mention the HOTAS commands too instead of just saying keyboard commands. Their has to be a way of zooming the TGP, lazing a target, and cycling the magnification levels with the HOTAS. Like either DMS up and down for zooming the TGP when it's SOI and cycling the magnification level via the pinky switch for instance. I understand control mapping is different for each user....but most essential controls stay the same such as the ones I just mentioned. When I have BMS fully figured out I might tryin make these vids since nobody else has. Honestly knowing the HOTAS commands for individual sensors is what's kept me from BMS for so long. The HOTAS setup for the F-16 has to be as ergonomic as the A-10c is DCS. But nobody touches on the HOTAS commands.

Rumor has it this guy is still saying "ok" "ok" "ok" "ok" ok ok ok ok ok to this day

Hey Krause watched these videos years ago and tried falcon but back then I did t know tacan from ils etc what radar modes did what the bms sim was overall drinking from the fire hose. Iv always perfered dcs but they really drag their heels with the apg 73 in the hornets air to ground modes. You excited tho for dcs f16? I Personally can’t wait iv slowly learned most of the more Modern dcs study sims so this makes me excited.

Okey, thanks! Nevermind that, I was just curious.. Do you happen to know any of the developers, since you seem to have most of the gameplay and features covered so well? Or do you by any chance know if there's going to be an update to MLU cockpit any time soon - or ever, for that matter.. ?

Hi! I just got BMS4.32, and I"m working on my campaing but, I can't zoom in or out with CTRL or SHIFT F3 and F4, I tried different combinations but nothing, I just have the naro and wide zoom options. Can you please specify the commands for me? Thanks! God job by the way!

love your tutorials. I got a problem with the GBUs. I got it all setup, just as you told: Master arm, laser arm, TGP (on weapon page), STBY, A-G, DMS down, TGP locked on the target. Then I fly into the fold in CCRP mode, holding down the pickle button from the moment I see the range indexer moving down until the moment the second weapons release indicator comes down all the way. But the bombs are just not releasing, instead, the second release indexer is moving up again. You got any idea what I could be missing here?

How to switch this computer into the a-g mode ? I am new in combat aircraft simulators ...

Aight, thanks mate. This is the way you transmit a marker point right. So once you've transmitted the mkpt, the fastest way of them getting their TGP in the area will be to lock on to the point with the FCR, using the HSD as reference, and then slew the TGP onto the mkpt right? But my question is; is it possible to enter the coordinates manually onto the ICP (if beeing read out by anyone), and slew the TGP directly on to them?

Is it Falcon 4.0: Allied Force? What mod do You use? Great tutorial vids btw.

If the TGP is loaded in the load-out screen while the flight is airborne it will not be placed on your aircraft. Also does it just say blank or does it say STBY in the top left comer if it says STBY click the corresponding MFD button and put it into A-G mode

Realy nice presentation. Especialy that at bottom U added time when in video U're explaining what (some of us are interesting just i some bits not all, and rather look U're video than reading fuc.... big manuals. Nice......like always ;) However keyboard keys aren't always same, so think U should also warn on option for loading predefined keyboard and buttons in setup and wich of them are U using? BMS or other or maybe post link just for file for keyboard layout.

Is the rdr slaved to the t-pod when it is the SOI ?

How do you slew the TGP around? I can only zoom in and out at the moment (Quite new to BMS)

With which buttons do you slew the pod?

can i use the TGP for any CCRP bombing or it is only for LGB's and maveriks. another thing: can u make a video about TFR? i read the manual but i didnt understand a thing thanks

Hey Tanit, I appreciate your videos. One tiny thing that you might want to correct is that you mention that 'GBUs' are all laser guided. Maybe you meant 'LGB'? The GBU38 and 31 for example are GPS guided and have slightly different employment methods (as i'm sure you know). Thanks again.

Hi! When you went over the feature where you displayed the coordinates (in A-G mode) on the TGP, you also mentioned that you could provide your wingman with these, whereas he could plot them into his ICP in order to slew he's TGP onto the area or target. Is this feature inplemented in BMS, or did you just mention this because it's actually a real life feature? I know it's supposed to work in real life, so I would be impressed if it actually works in BMS.

How did you zoom in in the TGP? Not the zoom button but like manually zooming in like u used the mouse-wheel or something

In this case, "masked" means that your aircraft is between the pod and the target. The only real way to change that, is to move the aircraft. Turning is usually the only thing that'll help.

LGB is a uk/european acronim, GBU is a US acronim, same thing really, Laser Guided Bomb or Guided Bomb Unit.

Also, GBU-12's are 500lb bombs

What do you use to actually SLEW the TGP once its the SOI?

after some minutes the display on the right of the HUD disappear, so i can't go on the list page or see my radio menu and all the other funcions of that display. someone could help me?

nice what button to use zoom in tgp ? thanks

Krause, how you move your point of view so easily, like 2:39? Thx!

@DiegoMenendez yeah I know. zzz

what is the point of using TGP in AA mode? Is it actually useful in attacking an aircraft or is it just to see the aircraft?

how did you zoom further? like 2.0x 3.0x to 4.0x. I can only zoom FOV to EXP

Whats the default key to go to air to ground mode? And how to reset to nav mode? Sorry I'm extremely new to Bms, I just installed on friday and have only gotten a few minutes each day since to play around. I barely know the commands.

Can this method be used with JDAM's as well?

How do you "aim" or manipulate the TGP? I finally got the SOI done, but now I can't move the laser (crosshair) around in the MFD.

Toggle the MFD screen. Keyboard ?

Is this video still compatible with bms 4..33?

Is there a way to unmask the TGP faster without turning???

Is what you guys are doing a home flight simulator?

I notice when L-MFD is SOI in TGP mode.. to slew the cursor Left and Right is very inaccurate. Any ideas on how to fine tune the cursor movement?

what do u use for mouse click?//////

what is the key to move the tgp around?

what is the maximum ceiling from which a lgb can be dropped in Falcon 4.0? I see that nearly all the videos show f 16 flying at 20.000 feet, but I think that fying higher should be safer against the menace of SAMs

KRAUSE WHY DO GBUS LAUNCHED IN PAIRS OR RIPPLES ALWAYS MISS? Only the first off the rail gets terminal guidance .

which keys do you use to move around? when I put in area mode it lock on one point, and I can only zoom in or zoom out,,

@musicduct ctrl + f3/f4

im having the same problem. its really frustrating. did you find a solution?

OK, so I did all of this in 4.33, and the bombs still keep missing the target. Is there something I haven't done?

Sorted

In the video, I think you just blended them together. You are correct, You just got them backwards lol

Why is the bloody laser in training mode?

@tanit Falcon 4: AF with BMS mod?