Agree...Totos is the best. So generous with his information and expertise. I love that guy. I have been meaning to do more videos on large single assists including the splicing methods...stay tuned.

Awesome! Maybe I'll bust out the fly tying vise...

I use a Renzetti vise. That one is specifically a vise they call the Saltwater Traveler. In my experience Renzetti makes the very best vises (and rod lathes) in the world. www.renzetti.com/saltwater-traveler/

Thanks for that and you are most welcome! So...on the Sabiki style I'd do exactly what you are suggesting: tie the assists and then add the bling either over the knot or on the shank below it and see how they do. You might even try adding the bling first and then tying the assist cord? I'd recommend just tying a few and then trying them and once you see what works you can tie a bunch of them up. I am very familiar with Spanflex. It's kinda like a rubber strand material with a pearlescent finish. Try it out and see how it does. My only concerns are that it ties in fairly bulky and it may get bitten clean off. It's very stretch by not abrasion resistant at all. But only one way to find out! Please let me know how they work out. Good luck!

Jeff Smith I agree! Insta Flex is a superior product. Not sure why it hasn’t caught on? I found it through wind ons as well and it has no peers for that application. It also lasts forever and doesn’t set up in the bottle...which ultimately makes it cheaper.

Thanks for watching - please like and subscribe! Yes - you can use shrink tube/shrink wrap. I'd recommend using a high quality superglue on the threads before you add the shrink tube. Marine grade adhesive-lined 3:1 shrink tube works best for me and is available in a wide range of colors. Also - be a little careful when you shrink it. All the cords - and threads - have different melting points. I have accidentally done some damage so go easy. Any epoxy from 5 min to 24 hour will also work...it just takes more work and you likely need something to rotate the hooks as they dry. But if you can manage that any marine grade or waterproof epoxy will actually work great. Hope this helps...good luck!

Thanks for watching...please like and subscribe! I got mine from Aliexpress but it's also all over Amazon. Just search pearlescent mylar sheeting. Here's an Ali link: www.aliexpress.com/i/4000515833637.html

Benvenuto! Thanks for watching - please like and subscribe! So - for the thread I use UTC 140 or 210 denier. You should be able to find this type of thread - which is a linear, non-bonded thread (like filaments, not a woven rope) at any fly shop in Italy. Not sure where you are in Italy - but try an online Italian Fly Shop like 54 Dean Street, Like a River, or Crazyfly. They should have some form of 140 or 210 thread - UTC, Danville Flat Nylon, etc. For the glue to adhere the bindings, I use very high quality super glue (ca glue) from Bob Smith Industries called Insta Flex...you can find it here: smile.amazon.com/Insta-flex-flexible-thin-Bob-Smith/dp/B002N507IA/ref=sr_1_2?crid=VK1PAXF6N0QW&keywords=bob+smith+industries+instaflex&qid=1652449082&sprefix=bob+smith+industries+insta+flex%2Caps%2C75&sr=8-2 For the final top coating of the thread wraps, I like UV Resin. This is again - like the thread - a fly tying product. You can find it at most fly shops, but make sure you tell them you want a very durable UV Resin that dries tack-free (not sticky). You will need a special UV light or lamp to cure this Resin...links to both resin and UV light examples below. You should be able to find them in Italy in a Fly Tying Shop. smile.amazon.com/Solarez-Ultra-UV-Cure-Fly-TIE-Resin/dp/B077MWZW8X/ref=sr_1_9?crid=1Q6XLMS6CSOM6&keywords=uv+resin+for+fly+tying&qid=1652449183&sprefix=uv+resin+for+fly+tying%2Caps%2C74&sr=8-9 smile.amazon.com/Loon-Outdoors-UV-Infiniti-Light/dp/B077MTTS5T/ref=sr_1_6?crid=1HHF4DAME30JU&keywords=loon+uv+light&qid=1652449244&sprefix=loon+uv+light%2Caps%2C72&sr=8-6 All of these items can also be found on Amazon.com. Hope this helps...let me know if you have questions.

Thanks for watching - please like and subscribe! We face the two hooks inward to reduce the risk of snagging and hanging bottom structure. It also helps reduce the risk of your jig fouling at depth. Hope this helps!

@@masteringrodbuilding Thank you very much for the explanation and your attention. Success and big hug😃👍🏾🤝🏾🎣❤

Angry Patriot thanks for watching...please like and subscribe! I use ToroTamer 20# 16-strand hollow core braid from Charkbait.com for the tie off loops...this is the stuff I use for rod building, too. It’s great but you can use any 20# or so braid. I recommend white/uncoated braid if you have it. Hope this helps!

Hello - So sorry for the delayed reply but I missed your comment and inquiry somehow. Apologies! I would be happy to share a fast pitch dual assist set up with you but I only use singles on my fast pitch/speed/mechanical set ups. I'm not familiar with a double? But I can work on a single video...lots of great techniques for that. Stay tuned...

Thanks for watching...please like and subscribe. That tool is called The Fugu Knot Tightening Tool...google it and you'll find lots of places that sell them. I ordered mine from captharry.com and they have them in stock currently...about $9.

Another great video my friend... Where did you buy the hooks and the cord? Thanks for your help

So...I think they may have gone out of business. Any tack free rigid UV cure resin will do. Both the Loon and the Solarez work very well: www.flyfishfood.com/collections/uv-resin-adhesives?pf_t_type=UV%20Resin%20Kits

Thank you.

Thanks for watching...please like and subscribe! That idea makes too much sense...where have you been all my life? The only thing I'd warn you is DON'T FORGET TO TAKE THE VINYL OFF BEFORE FISHING. Ask me how I know...