Glad to see that you like the ALCO C420. It's my favorite local locomotive from Northeast Pennsylvania. I know you've seen the real deal at Steamtown and thought you'd like to have the "Pocono Mountain Route" for the layout. Nice to see what other viewers/subscribers sent along as well. I see DB Tech has been to Harbor Freight. That Varney information will be useful. Nice switcher -- I'm sure you'll get her riding the rails once again. Thanks for sharing. 👍👍👍

Once again David Z to G sends something really cool!

Amazing! Also you are very welcome for the 0-4-0!

We like the Tyco piece. Right up our alley. Still watching🚂🚃🚃🚃🇨🇦

C420 is from the most recent run of these, announced March 2018 but they didn't actually show up until December 2019. You can look up on the Atlas website under Archive what the pricing was. Knock off about 25%-30% for what they actually sold for. Delaware-Lackawanna is GVT's operation out of Scranton on primarily the former DL&W mainline going east, plus portions of the original D&H mainline and some other various branches. DL 405 was built in 1964 as Lehigh Valley 405, going to the Delaware & Hudson in 1976 and Indiana Hi-Rail in 1987. GVT bought it in 2005. The models are nice, I have nine of them so far, six Lehigh Valley, two N&W high hood, and one SCL I found stupid cheap at a show. I almost bought another one today at a show, guy had a DCC sound one for a cheap price. But the C420 is probably my favorite locomotive. That's funny, I bought a bag of that same jerky this morning and I haven't had a craving for jerky in years and years. 1

David Z to G you are a amazing person we need More people like you in this world

Great video and I'm glad you enjoy what I sent. Once again, out done by David Z! That's a really sweet engine. That Lima should run great when you get it fixed. I could use a copy of those Varney manuals. Great mail call, enjoy the "Sweet Baby Rays!" Let me know if you have any questions about the LEDs.

Thats a Beautiful atlas locomotive its awesome. That chef boyardee car is pretty neat! Ahh the famous Harbor Freight tools they are good priced tools and they do the job. Sweet baby rays BBQ sauce is very good! That Led project is basically what I have schematics for so i can put an LED in my locomotives that way they draw less power and the gain is less heat. Them varney instructions they are rare to see i never seen them. That lima steamer is really nice.

It’s been a long time since I’ve watched one of your videos, but they are still amazing!

Many happy returns Harrison - must be fun every time the post arrives. Some great gifts today - you deserve them!

Really nice gifts, instructions, parts and food supply!

I inherited one of those 0-4-0 switchers from the 1960s and they are amazingly strong engines. I used to tow consists so long that not even my numerous diesels or steamers made in the last 15 years or so could compare. Sadly it died out for some reason, I think a wire became disattached for some reason, so I threw it away. Then I got into O Gauge...which while I love it I also regret because of how hard it is to fit stuff into a layout and the sheer price of locomotives, track, accessories, rolling stock, and transformers.

Nice haul as always! Love that DLW C420-I saw them working the yard when I went to Steamtown many years ago and it was pure joy seeing those old Alcos in action!

SMT, I think you should ask some manufactures for some samples that you could review. You have the perfect voice, and you'd get free stuff!

I don't know when your birthday is/was but Happy Birthday. What a haul in the mail. Wow and that locomotive is incredibly awesome. What a great gift. Loved seeing it run and hearing the sounds The Chef-Boy-R-Dee car is so cool. Not trying to make light of the other gifts by any means. I am really looking forward to seeing the little engine being fixed and running. Take care and stay safe. 💕

That Atlas model probably has an ESU Lok sound decoder. That is indeed the startup on F8.

Really cool stuff SMT, never saw a Chef Boyardee boxcar before! If that Atls C420 is equipped with what I think it is, which would ESU Loksound, it should share some of the same main functions as my Intermountain and Scaletrains locomotives which would as follows: F0: Forward/Reverse headlight F1: bell F2: horn F3: coupler F4: dynamic brake (locomotive must be moving to engage this effect) F5: numberboard lights F6: I assume will be auxiliary lights (ditch lights, class lights, etc.) F7: headlight dimmer (aka Rule 17 lighting) F8: starts up the prime mover sounds, press again to shut down prime mover sounds F9: drive hold (this mode allows you to change the engine rpms independently of the train speed) F10: Independent brake Again, I'm going by the assumption that your locomotive is equipped with ESU Loksound, if so hope this helps also you can change the horn and bell if you so desire!

Wow! What an EXTRAORDINARY GENEROUS GIFT !

Hello Harrison, your new loco might have a loksound decoder. F8 will be engine shut down and startup. F8 will Mum while. It is running. Enjoy

I live in Northeast Pennsylvania and whenever I visit the Steamtown National Historic Site or the Steamtown Mall I always see that engine every time.

Nice unboxing the Alco C420 is a nice looking locomotive.

Loved that gift Loco, it was fantastic and you didn’t even have to crack it open 😊

Neat stuff!! Thanks for sharing’!

Que bakán la Alco, very nice stuff!

I don't remember that version of Chef Boy- Ar -Dee in TYCO. I bought one in yellow by BACHMANN. Nice gifts always enjoy watching..🙂

Never in my life did I think I would freak out about a train video, but when I saw Delaware Lackawanna on the side I got more excited than my 3yo. He listens to the old Puff n’ Toot vinyl record at least once a week, and if you know you know. Thanks for the videos! He asks for yours specifically.

Love alco c420! That's a very nice engine! You deserve it for all your hard work, and very nice of dave to make your birthday special! Take care!

saludos hermosa locomotora

I rail fan the Delaware and Lackawanna

that 0-4-0 is so clean looking

That’s a gorgeous Atlas

What a beautiful Train have fun whit it🚂

About damn time you get an engine with ESU Loksound. F8 is the standard start/stop button on ESU decoders. Great stuff!

More cool stuff, awesome Atlas.

Oh boy this is gonna be a fun episode.

That's super cool!

Very nice!

It is dcc ready and cool I like it.

The ALCO C420 locomotive DCC with sound i loved. Atlas. Good luck.

Nice gift beautiful engine

Awesome C420! F8 is usually sound on/off for Atlas and others. There is some DCC programming you can do I think to have sound set to auto-on when it first receives power.

Never thought I would see Harrison so excited over beef jerky. Love your videos!

Yo Harrison, I think your used to bachmann and athearn sound products. The way your DL ALCO C420 is the standard way of doing it. F8 turns the prime mover on, when pressed again its shutdowns the prime mover

CheF Boi R Dee and a C four twenteee wheeee PPS F8 is engine startup and shut down. that's a DCC standard on the newer locos.

Awesome engine!

Happy birthday, and a question, have you thought of making your own Hershey's rolling stock, or an addition to the SMT consist, like a locomotive?

that's awesome I actually just got my first models a seabord system gp40 and a BN caboose!!!

Wow that’s such an amazing lot! I wanna Thank Paul tommy David of db tech and David of David z to g for sending all of this to Harrison!

The ESU lok sound V5 that The C420 has is fun because of all the functions they have and F8 starts it and shuts it down or mutes it

Awesome mail call!!!!

railtastic

Atlas Is just really good, the old ones I have still run, and my new ones for the most part have DCC and Sound, They are phenominal.

Yeah I have an atlas loco like that and it makes those sounds, you need to enter F8 or something like that to make it do idling sounds I was wondering the same thing too when I got mine

Nice

Harrison, if I could I’d send you my CSX loco, when I put it on the rails and run it, it just starts and stops for me. But at my age I sadly can’t. I like the video, stay safe!

nice

The alco 420 is one of my favorites, I was lucky enough to see one at the chyohuga valle in Ohio ( I probly messed that up) ALCO POWA!!!!!!

nice atlas

Nice engine and lucky that things are really expensive.

Wow, that Atlas C420 is awesome! Another great fan mail segment, I swear you get the most fan mail of any model train KZfaqr.

That I believe is a Top of the line engine.

Alco power!!!

It will be cool .

My dad. Drives that locomotive it Steamtown it’s really fun to ride to I even got a ride it

The dcc locomotive is sooo beautiful

That Delaware and lackawanna unit 405 is a former ex lehigh valley 405 little historical favt about the real thing and its sister 414 and others still running

The DL serves scranton, PA and runs through steamtown

4 is by default cutting speed in half for more precise shunting. at list in my ESU decoders.

Happy 20th.

I have a stem engin tran like that and it struggled to pull 1 tran car.

Hope you could find some more Mehano goodies in the near future!!!

We need the F40PH painted

Very nice!!! Are you a fan of SD70ACe’s? I’m a huge fan of SD70ACe’s.

Hello Smt mainline how are you doing I got a Fp7 locomotive it's made by Atlas it's an old model it runs good

that's not an issue atlas locos have esu decoders which are muted by default and start up with f8. I have some rapid and scale trains locos that do it the same way so there's nothing u need to fix.

I live near the Delaware Lackawanna railroad

How’s The Factory Doin? Buy the Looks of it you might be Workin on Some Loco’s soon you got So many things to think about working on .

😮

I have that same C420 and the Monon C420. Atlas Master Gold are great locomotives ( I don't care for their "Classic" line, too noisy).

That intro would definitely make certain people stop watching after the grey scale reveal.

If EL GATO NERFF wiuld have appeared in this it would have been 💯💯💯

Hello! I usually watch your videos very attentively, but there's something I don't get. What do you do with all the locos and rolling sock you receive and why do people send their trains to you? Finally, Do you re sell the stuff? Greetings from Aguascalientes, Mexico

It looks like a alco rs-16

Also by the way happy deleted birthday🖒🖒🖒🖒

Wait, your 20?!?!?

Hi SMT happy birthday and very nice loco

Nice! Have fun.

I have a 1951 varney Casey Jones but it doesn’t work and it’s my profile picture. I would like any help getting it to work

I am in search of a Bowser C-636 with ESU Loksound 5. Hope to get one soon!

Hey

Great stuff right now I’m in Folkston funnel Georgia you should really try to come down and see it but do not come in the morning come in the early afternoon

Hey David, I am planning on buying the PMI Lima NYC train. Can you tell me if it’s worth it?

I'm with the one guy that's DCC f8 is startup and then you run it and then when you're ready to shut it off you press f8 again and it shuts down very nice locomotive

hey smt it’s may 2021 where’s the hershey factory

nice!

I've seen a d&l train when I went to steam town you can see it on my channle

SMT, you should build that fireless locomotive that you got over 2 months ago

I dont have to whatch the video to like it because I allready know its gonna be good

Did you get a fan mail?

To quote a great “ no more ding ding”-hyce