Рет қаралды 42,468
Learn to create braided hoop earrings in this beginner friendly wire wrapping tutorial!
Wire used: 22 gauge round dead soft (I purchase mine from RioGrande.com)
For 1.5" diameter hoops use 6 strands of 7 inches per earring
For 1" diameter hoops, use 6 strands of 5 inches per earring
Tools Used:
Chain Nose Pliers (Click here for the ones I used): amzn.to/2z1nxcj
Round Nose Pliers, (Click here for the ones I used): amzn.to/2FlJpVj
Flush Cutters, (Click here for the ones I used): amzn.to/2DAo8Wd
Steel bench block: amzn.to/2PQohL3
Jeweler’s hammer: amzn.to/2Dh7vxQ
Ruler: amzn.to/2DleG82
Ring Mandrel: amzn.to/2WN3yaA (optional)
Masking tape or painters tape (optional): amzn.to/2LGZE1p
Etsy: www.etsy.com/shop/FantasiaEle...
Facebook: / fantasia-elegance-1874...
Instagram: @fantasia.elegance ( / fantasia.elegance )
Thanks for watching, and happy crafting!
Music:
“Prelude No. 3” by Chris Zabriskie
freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) creativecommons.org/licenses/b...
“Prelude No. 23” by Chris Zabriskie freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.
**Note: I may receive some compensation from purchases made through Amazon affiliate links.