Рет қаралды 24,810
Tools used in this video
K4 Kreg Jig: amzn.to/3oq5fbt
Dewalt miter saw: amzn.to/39oR2Y7
Irwin 24” clamps: amzn.to/2NpFRWv
Irwin 36” clamps: amzn.to/37NN2za
Irwin 48” clamps: amzn.to/2Yodiem
Central Machinery 2 HP dust collector: amzn.to/3tYrbON
PONY ¾” pipe clamp: amzn.to/37d8UU8
Speed square: amzn.to/3oJryJj
SKIL 30 piece router bit set: amzn.to/3sPIKiK
Dewalt circular saw: amzn.to/3qqYsiG
Dewalt drills: amzn.to/2O1O6ZI
Jorgensen clamps: amzn.to/3j3FEnO
Dewalt jigsaw: amzn.to/3auNGSE
Figure 8 fasteners: amzn.to/2KWtZKH
Freud forstner bit: amzn.to/2YnWMen
Doweling jig: amzn.to/3aAg2v1
Minwax Puritan Pine stain: amzn.to/2PIsAcP
Minwax Satin Polyurethane: amzn.to/38jrwCJ
Minwax Satin Wipe-on polyurethane: amzn.to/3kSsx9Z
Materials:
2x10x10 (x1)
1x16"x6' (x2)
2x4x8 (x3)
2x2x8 (x6)
Cut List:
Legs: 2x4x36" (x4)
Leg supports: 2x4x13" (x4)
Leg support beams: 2x2x46" (x6)
Side (and inside) supports: 2x2x13" (x5) - cut ALL of these from 2 of the remaining 2x2s from the leg support beams
Bottom shelf: 1x16"x52.875"
Middle shelf: 1x16"x48.875"
X pieces: 2x2x(at least 34" long) - you should have four ~50" pieces left over from the leg support beams
The stain is Minwax Puritan Pine and the clear coat is Minwax satin polyurethane.
This was filmed with a GoPro Hero 6 Black, and edited in iMovie.
Thanks for watching! Be sure to check out some of my other videos for more builds with free plans!
*DISCLAIMER*
The following content is for entertainment purposes only. Woodworking and using power tools can be extremely dangerous if not done properly. YOU (the viewer) are fully responsible for understanding proper use of tools, as well as the safety features of each. I highly suggest reading the owners manual and/or watching how-to videos on the tools. I (MMCC_Woodshop) am not responsible nor liable for any injury, death, or handing of the tools you may use, nor do I assume to display the proper handing of as a demonstration. Please use extreme caution when working with any power tools.
- Matt