In This Video I will show you have to modify the LED assemblies to fit correctly. They WILL NOT FIT STANDARD.
Пікірлер: 24
@timryan38493 жыл бұрын
I had the exact same problem with that black light trim cover.
@steverobinson18473 жыл бұрын
Good guide, but you dont cover the wiring change, I.e. separate main and dip to both on all the time. Not rocket science but would be useful to include.
@paulsmale54363 жыл бұрын
Its rocket science to me so how is it done? am in the UK and get one side dip the other main.
@rent2ownnz3 жыл бұрын
The loom that you get. With your LED light will just plug in to do it all for you without modification to the original.
@rent2ownnz3 жыл бұрын
@@paulsmale5436 hi Paul, the wiring loom thst you get. With your LED light simply pluflgs into the original loom and allows both lights to work at once.
@THORSONOFODIN133 жыл бұрын
Yo man I had no problem snapping my great lights in from hog plug and play dude took five minutes
@rent2ownnz3 жыл бұрын
Yeah depends if you have USA or NZ new model. They are different.
@THORSONOFODIN133 жыл бұрын
@@rent2ownnz USA 2008 FXDF
@eduardomotta63873 жыл бұрын
can you open and send a photo of the wires plz?
@rent2ownnz3 жыл бұрын
Answered your question below.
@jamesrebbs55702 жыл бұрын
i have aus 2008 will these fit where did you get lights from including loom address please...I take it you did not change the shell just mod the lights to fit opening the casing off lights
@rent2ownnz2 жыл бұрын
got from Vikings in Hamilton NZ. comes with loom... he will ask you which one is in your bike
@rent2ownnz2 жыл бұрын
RE Mods ... it shows it al in the vid
@jamesrebbs55702 жыл бұрын
@@rent2ownnz thankyou i will give them a call
@paulsmale54363 жыл бұрын
Your harley headlight wiring is 2 pin not 3 pin like the led headlights, how did you sort that? is there an adaptor available cus am at a loss?
@rent2ownnz3 жыл бұрын
Hi. Not sure what you mean? If it is an AUS or NZ release bike... You will most likely have the same issue as I did. If you have 3 wire system then yes you can get the correct harness kit that comes with the LED units. You Ned to let the seller know you have a 3 wire system and you will most likely not have the issues u had installing into the canister.
@eduardomotta63873 жыл бұрын
HI, you have the internation model like I have, how you did to fit he Leds to the wire? Can you help me? or you have changed the lights and the recipient with new wires?
@rent2ownnz3 жыл бұрын
The lights come with the correct wiri g loom to make the connection without any modification to your original wiring loom on the bike.
@THORSONOFODIN133 жыл бұрын
get someone else to hold the freakingcam
@rent2ownnz3 жыл бұрын
BUDGET IS TOO LOW :)
@timryan38493 жыл бұрын
If you got these lights from Hogworks they will not fit certain fat bob dyna models like a 2009, etc although the description on their website says it will which is a lie. Techs at Hogworks will tell you over the phone that the lights will fit making you sound like an idiot. When in fact they do not because these lights have aluminum tabs on them that you have to grind down in order to make these lights fit flush so the frame bezel cover will fit over them. To make things worse one of my lights is now dead for having it only a year. These lights are garbage. Thanks for making this video because I’m glad I wasn’t the only one who noticed this bullshit design.
@rent2ownnz3 жыл бұрын
hey Tim, Thanks for your input. Much appreciated. I think it has a bit to do with whether you have a USA,EU, AU or JAPAN version bike? I am not quite sure, But I am glad you liked the video and found it informative. Cheers Westy