Fault finding and trying to fix the Apple ][ plus

Рет қаралды 83,695

3 жыл бұрын

Welcome to part 3 of the Apple ][ plus series. Let's start fixing stuff!
Part 1: • A viewer sent in a ver...
Part 2: • Apple ][ plus extreme ...
Part 3: This part!
Part 4: • Fixes for the Apple ][...
Part 5: • Apple ][ plus: 8304 re...
Part 6: • Apple ][ plus: VIDEX 8...
--- Video Links
The Apple II Circuit Description by W. Gayler
mirrors.apple2.org.za/Apple%2...
--- Tools
Deoxit D5:
amzn.to/2VvOKy1
store.caig.com/s.nl/it.A/id.16...
Jonard Tools EX-2 Chip Extractor:
amzn.to/2VazxDS
www.jonard.com/Products/EX-2-...
Wiha Chip Lifter:
amzn.to/3a9ftWw
www.wihatools.com/precision-c...
O-Ring Pick Set: (I use these to lift chips off boards)
amzn.to/3a9x54J
Elenco Electronics LP-560 Logic Probe:
amzn.to/2VrT5lW
Hakko FR301 Desoldering Iron:
amzn.to/2ye6xC0
Rigol DS1054Z Four Channel Oscilloscope:
www.rigolna.com/products/digi...
Head Worn Magnifying Goggles / Dual Lens Flip-In Head Magnifier:
amzn.to/3adRbuy
TL866II Plus Chip Tester and EPROM programmer: (The MiniPro)
amzn.to/2wG4tlP
www.aliexpress.com/item/33000...
TS100 Soldering Iron:
amzn.to/2K36dJ5
www.ebay.com/itm/TS100-65W-MI...
EEVBlog 121GW Multimeter:
www.eevblog.com/product/121gw/
DSLogic Basic Logic Analyzer:
amzn.to/2RDSDQw
www.ebay.com/itm/USB-Logic-DS...
Magnetic Screw Holder:
amzn.to/3b8LOhG
www.harborfreight.com/4-inch-...
Universal ZIP sockets: (clones, used on my ZIF-64 test machine)
www.ebay.com/itm/14-16-18-20-...
RetroTink 2X Upconverter: (to hook up something like a C64 to HDMI)
www.retrotink.com/
Plato (Clone) Side Cutters: (order five)
www.ebay.com/itm/1-2-5-10PCS-...
Heat Sinks:
www.aliexpress.com/item/32537...
Little squeezy bottles: (available elsewhere too)
amzn.to/3b8LOOI
--- Links
My GitHub repository:
github.com/misterblack1?tab=r...
Commodore Computer Club / Vancouver, WA - Portland, OR - PDX Commodore Users Group
www.commodorecomputerclub.com/
--- Instructional videos
My video on damage-free chip removal:
• How to remove chips wi...
--- Music
Intro music and other tracks by:
Nathan Divino
@itsnathandivino
Outro Music:
Abyss by | e s c p | escp-music.bandcamp.com
Music promoted by www.free-stock-music.com
Attribution 4.0 International (CC BY 4.0)
creativecommons.org/licenses/...

Пікірлер: 284

@stephenlord1539 3 жыл бұрын

why is it, that whenever Adrian attempts a well thought out bodge (like his triple stack), when he tries it out and it works, the genuine joy in his voice, makes me sit here at home in the UK, smiling to myself. To be honest, I don't know why he's surprised that it works, the guy is a genius in my eyes.

@amirpourghoureiyan1637 3 жыл бұрын

he's got a good mix of technical knowledge and humbleness, I wish more tech youtubers were like that instead of being arrogant with their ability.

@gallgreg 3 жыл бұрын

That is an awesome bodge! Great idea to shift the IC up one row!

@pipschannel1222 3 жыл бұрын

Well put. The trick is having a diagnostic mindset (the ability to hunt down and isolate separate issues while keeping a clear head) and to be well organized at the same time. Adrian is very good at both and he's also good at presenting/transfering his findings to his audience in a down to earth way which takes enthousiasm and a certain 'hunger' to hunt down bugs/defects, which he clearly has. Always a treat to watch his videos! They always hit close to home for me as he constantly reminds me of the way I do things and I have to say and I learned a lot by watching them. Big thumbs up for this guy! Keep on making excellent content 👍

@electronicengineer 3 жыл бұрын

SRAM and (octal) buss transceivers... As I think back over my decades of repairing logic boards, these two components seem to have the highest percentile of failure rate out of all other integrated circuits. Nice troubleshoot and VERY creative solution in "reconfiguring" the I/O pins of the 74LS245 Adrian. Has anyone ever told you that you have a propensity for teaching? You would make an incredibly good electronics teacher! Cheers, Fred

@greendryerlint 3 жыл бұрын

What a great feeling it is when you revive something like this. Then what a sinking feeling when months later it develops another fault, as vintage electronics seem to do. But then another rush of achievement in reviving it yet again.

@mc0burn 3 жыл бұрын

This channel makes me happy.

@jensmaa 3 жыл бұрын

Showing the schematics and where you're probing is pretty nice!

@thomaswright6776 3 жыл бұрын

Watching this is like watching a detective TV show and it breaks off as things get interesting!! Sigh - look forward to the next exciting episode next week!!!

@brianv2871 3 жыл бұрын

After he finally fixes it, he should say "oh, wait... What's that?"... followed by "The End???"

@tony359 3 жыл бұрын

"Don't worry, there are more faults!" :D

@KennethPlaysOfficial 3 жыл бұрын

yayyyyyyyyyyyyyyy

@twocvbloke 3 жыл бұрын

One of the fun things about repairing is it's like going for a walk somewhere new, yeah you can get lost on the way, but end up learning as you go and finding your way back eventually... :)

@johnpilkinton1592 3 жыл бұрын

Let's get right to it!

@LoopyLucy95 3 жыл бұрын

I love these old computers! I'm 24 (so way after when these computers would have been in schools) and thoroughly interested in computing history.

@SixOThree 3 жыл бұрын

I can definitely recommend the Apple IIe for you (excuse my pushiness if you already have what you need). They aren't crazy expensive. All you need is the main unit and an audio cable. You can use websites on your phone to stream the data (as audio) to the computer to load programs. Additionally, it connects to any television that accepts a composite input. And if something goes wrong, you have this channel for a reference!

@brianv2871 3 жыл бұрын

@@SixOThree Yup, I have a number of retro computers and would agree with your suggestion as well. It's not my favorite retro computer, but it's definitely the one that offers the most tinkering ability as well as an abundance of software. It's also relatively easy to find.

@LoopyLucy95 3 жыл бұрын

@@SixOThree Thanks, I'm not sure if they will be particularly easy to find in the UK but I'll certainly keep an eye out. My current goal is either a BBC Micro or a C64 and appropriate CRT monitor.

@KennethPlaysOfficial 3 жыл бұрын

im 11

@KennethPlaysOfficial 3 жыл бұрын

@@LoopyLucy95 hi im 11

@Mclaneinc 3 жыл бұрын

Loving this little series, I just marvel at the knowledge and the thought process, rather than a typical "lets change everything" you actually workout the way the machine works. I know that should be the standard way but you see so many people just bulk replacing chips. Looks like another machine is getting the thumbs up Adrian so you got one as well. Greetings from the cold old UK and keep yourself safe, Paul.

@KomradeMikhail 3 жыл бұрын

That pin header in the video area was for an RF Modulator add-on. Because Composite RCA jacks on TV's were uncommon in 1977. *Sup* *'R'* *Mod* *II* has a wiki page.

@TRONMAGNUM2099 3 жыл бұрын

You don't have a patron or KZfaq subscription service. You make some of the best content on the net. I'd gladly give you a couple of bucks every month for all you do.

@adriansdigitalbasement 3 жыл бұрын

Thanks for the feedback. I'm think of finally creating an account there.

@nickwallette6201 3 жыл бұрын

I have a very different approach to replacing parts. Rather than badge something to support a different chip, I would order the right part, or failing that, send of an order to OSH Park for an adaptor PCB with a surface mount IC. ADB comes up with a Frankenstein fix in an hour, I come up with something prettier... in 4 days to three weeks. Haha. This might explain why I have piles of half-finished projects on my workbench.

@gallgreg 3 жыл бұрын

Yeah, I think it is wise to do the bodge just so he can prove the part is bad! Otherwise you have to put it aside and wait for parts to come, then try to remember where you left off when you finally get back to it! Plus, he can enjoy the fixed computer now while he waits for the replacement part!

@k-a3405 3 жыл бұрын

Everytime I hear the intro I shout 'JAM ALERT' because that tune is so gooooooooooooooooood!

@mikejetzer4155 3 жыл бұрын

The 4-pin header near the video jack is not for 80-column cards, but rather for an RF modulator for connecting the computer to a TV. The Sup'R'Mod was the de facto standard RF modulator back in the day.

@pauljohn143 3 жыл бұрын

I am a Sinclair ZX80, ZX81, ZX Spectrum user, never used or owned an Apple PC and never will, but Adrian’s skill and enthusiasm makes them the most interesting repairs on KZfaq, Thank you Adrian, looking forward to the next one and many more.

@ScarletSwordfish 3 жыл бұрын

The way you diagnose problems like this on these old computers is just fascinating.

@gallgreg 3 жыл бұрын

Wow, great troubleshooting! Glad you got it working!! I appreciate that you show us your mistakes so we can learn from them!

@iamdarkyoshi 3 жыл бұрын

8:24 that's an LCD panel not getting the right signal and the control chips not driving the pixels It's got an afterimage of your windows start bar on it

@jonathancombe9991 3 жыл бұрын

Impressive stuff Adrian. When you found the dead chip and you didn't have any of them I think most people would give up. To work out and find those chips that stacked together like that would do the job of the bad chip was really impressive and shows your dedication to getting these old and rare machines working again. It was great to see it boot up again after that fix. Great stuff.

@netcreature 3 жыл бұрын

I used the trick of sharply pulling up several times(basically the opposite of a quick key press)on each key on the keyboard of my II+ and it's worked for years since. Nearly half of my keys didn't work prior to doing this.

@cjhickspe1399 Жыл бұрын

I like how you show the bone-headed mistakes. It makes me feel better about doing them myself when I am messing with this old hardware.

@slashdevslashzero 3 жыл бұрын

It's always the tristate buffer. Even when it isn't it is.

@r.l.royalljr.3905 3 жыл бұрын

What about the case where it both is and isn't?

@slashdevslashzero 3 жыл бұрын

@@r.l.royalljr.3905 Yes.

@retroguy74 3 жыл бұрын

@@r.l.royalljr.3905 schrodinger's tristate buffer.

@richardlighthouse5328 3 жыл бұрын

@@retroguy74 Oh no.

@jengelenm 3 жыл бұрын

This is some humongous high level troubleshooting! Great job!

@StillCloser 3 жыл бұрын

This is much better than the long mail videos... Seriously, no one want to hear about candy or how many you've already ate...

@GarthBeagle 3 жыл бұрын

Wow, you track down the these interesting faults and then manage to come up with a creative resourceful way to fix them - makes a great video!

@TheLOD2010 3 жыл бұрын

So, in the meantime I'll wait for your midweek video. Every Wensday and Saturday I am waiting for KZfaq to tell me, your new video is online. The differenc to other retro computing channels is, you show the trouble shooting and tell us every mistake you had done. That is a cool way to lern diagnose one of those old 8-Bit computers!

@Zeem4 3 жыл бұрын

Some old Acorn computers suffer the same keyboard problem after long periods of disuse, particularly the Acorn Electron and the BBC Master 128. My fix has always been to hammer the keys repeatedly until they start working, which sometimes takes hundreds of keypresses. There's also a way to desolder a switch, unscrew the pins from underneath, clean them up and reassemble, but I don't know if the Apple II uses the same switches. They certainly sound a lot like the keyboard on the Electron.

@TranceTrousers 3 жыл бұрын

This is fast becoming one of my most favourite channels.

@dryphtyr 3 жыл бұрын

The 2+ is the first computer my family had & was my introduction to computers. Really enjoying this series.

@more.power. 3 жыл бұрын

Most of the time I have no idea what you are doing but the way you follow the board around is very logical as you do repairing a computer. Thanks Adrian

@Nabraska49 3 жыл бұрын

I love the Sherlock Holmes adventure of finding the mysterious fault and you are really pleasant to listen to as you tell the story well done Adrian I’ve watched almost all your posts .. cheers from Australia

@andiroemer8180 3 жыл бұрын

Adrian, you are so passionate, I really love to see you fix computers. You are always an inspiration for me and my retro hobby! Best regards from Germany!

@GiammarcoZacheo 3 жыл бұрын

I'm always waiting for the "Oh-ho! Look at that!" moment. Thank you for another awesome video.

@bigloudnoise 3 жыл бұрын

Posting this while still watching, currently at 19:23 when he just removed the memory chips to figure out why D0 is being held low. He mentioned the third chip not being installed because that's where the Language Card plugs into, and that triggered an alarm bell inside my head. If no language card is installed, then that socket needs to be populated with a RAM chip. Since that socket is empty, that could be why D0 is being held low. (I'll edit this comment later if needed as I continue watching.) EDIT: Ok, it wasn't the cause of D0 being low. However, it still is true that the white RAM socket needs to be populated if no Language Card is installed, so further testing down the line might have issues with that socket being empty.

@yakattack1069 3 жыл бұрын

Awesome video! Love seeing full repair videos. Takes me back to the 80s (and 70s). Keep it coming!

@MattyEngland 3 жыл бұрын

Hey Adrian, I just used your desoldering method to replace some dips with sockets on a 1982 fruit machine. Thanks for the tips. 👍👍

@FarrellMcGovern 3 жыл бұрын

I love watching this...memories...I built my own Apple ][+ clone back in the 1980s, and it brings back memories of both debugging my own MB and helping other people in the Ottawa Apple community, or the 6502 Users Group as it was called. True, we did have Commadore people too, but I didn't interact with them...

@edwinconcepcion1135 3 жыл бұрын

Awesome troubleshooting process! Thank you for the instructions!

@michaelelsy2209 3 жыл бұрын

I never understand all the gobbledygook you say but I do love your videos especially when you finally fix the item you're repairing 👍🏻.

@amodo80 2 жыл бұрын

It made me really happy when the adaptor worked.

@rodhester2166 2 жыл бұрын

Thank you for all of your time and work you put into this and your other videos.. great job

@MickeyMousePark 3 жыл бұрын

at 4:47 he says "that's a warm chip" (8304) that should have been the first clue..a can of component cooler might be helpful (back in the old days ..now an infrared camera would be better to spot hot chips) ...there is really no reason for a Transceiver to run hot unless something is wrong...for the triple stack..very creative..myself i would have just bent the 3 misaligned pins up (outside of socket) and run wire wrap wire from each pin to the mother board and install chip in the socket one pin down..this would look more professional and cleaner..I worked for Tandy back in the 1980's and we had to do this sometimes to make factory mods.....granted to replace the chip you would need to unsolder the 3 wires and install a new chip and solder the wires..putting original in would just be cut the 3 wires off mother board...

@tenmillionvolts 3 жыл бұрын

As soon as he said warm chip, I thought that's the bad one :) No good content in that though. We all would have skipped this vid as 'too easy' Had to have the satisfaction of full diagnosis. It makes me want to pull out my bad 2e board and get stuck into it

@MickeyMousePark 3 жыл бұрын

@@tenmillionvolts good point..I also wanted to add to all beginner techs out there..if you do not have an infrared camera and cannot find component cooler..you can also use a can of compressed air "Computer Duster" just invert the can and spray..

@MotoRideswJohn 3 жыл бұрын

Adrian, you continue to amaze me you wizard! Remarkable work.

@HAGSLAB 3 жыл бұрын

Another well done diagnostics and fix session. Good job!

@BlueXonar Жыл бұрын

These videos are both incredibly interesting and slightly terrifying to me, a retro computer and circuitry noob, who is trying to get one of these working!

@SludgeFuZZ 3 жыл бұрын

Love the intro music. Reminds me of a very young me enjoying playing c64 games..

@januszkszczotek8587 3 жыл бұрын

Nice analysis of the signals and reasoning to find the error(s). Looking forward to part 4!

@2010Thex 3 жыл бұрын

Excellent work and that book is a must for Apple II repairs. I love my copy! Nice to know about the piggyback option.

@senilyDeluxe 3 жыл бұрын

I made an adapter for an LS244 when my 8T28 (or what was it) bus transceiver went up in smoke, because even though my local electronics store (which now only sells computers and computer parts, RIP) had 8T28s in stock (new old ones), they were insanely expensive like 20 bucks a pop or something. EDIT: The machine I'm talking about is a 1980 bootleg Apple ][ that has some differences to the one shown in this video

@NatFablife 3 жыл бұрын

Now that’s creative the way you put your own style on it!

@gbowne1 3 жыл бұрын

Woohoo "APPLE ][" good job Adrian

@aurthorthing7403 3 жыл бұрын

Very cool. These are the type of mods I like. Taking the modern or easier to find equivalent and creating a non destructive method for making it work.

@johnsonlam 3 жыл бұрын

Great fix, especially the custom 8304 adapter!

@CDP-1802 3 жыл бұрын

This channel totally makes my Wednesday and Saturday :)

@MoosesValley 3 жыл бұрын

Really nice diagnostic work Adrian. Long live the Apple ][ !

@physnoct 3 жыл бұрын

A long time ago, I bough old computer boards with a lot of TTL chips. The sockets were Texas Instrument sockets and when I tried to reuse these sockets in my projects, they weren't reliable. Plus the use of rosin flux caused some problems with the socket. When using flux remover, it left a film of rosin on the socket pins so that circuits no longer worked. The best sockets are those dual leaf sockets.

@MSmith-Photography 2 жыл бұрын

Stacking the sockets and the chip...you've made a Big Mac. 🤣

@GadgetUK164 3 жыл бұрын

Another fun repair =D Looking forward to part 4!

@LarryDeSilva64 3 жыл бұрын

interesting fixes you had for the apple. Much better looking at a circuit diagram as you are explaining what is happening. great to see you work.

@petesapwell 3 жыл бұрын

I totally share your joy, Hey look at that!! It’s working, that got me hooked 40 odd years ago on electronics and it still does. Excellent work my good man, Permission to engage ‘Smug Mode’ ,,,, Red Dwarf Quote :)

@giumacgyver7127 3 жыл бұрын

Yesss! You just invented the 2020 version of the 8304 IC ! I intensely followed this video like a thriller movie 😅 and i guess that final solution was you last card to play on this issue ! Cool fixing and cool computer, i'm trying to find an Apple ][ too but i'ts pretty hard (and expensive). You should have said "Stay hangry, stay foolish" instead of healthy and save at the final 🤣

@mitchelrowe7363 3 жыл бұрын

the quick brown fox jumped over the lazy dogs back

@theannoyedmrfloyd3998 3 жыл бұрын

Excellent detective work tracking down that motherboard chip. I don't think I would have gotten it.

@tommyovesen 3 жыл бұрын

Great analysis and troubleshooting. I learn a lot :)

@tiporari 3 жыл бұрын

Nice repair. Excellent part substitution.

@chadsmith8476 3 жыл бұрын

Very nice! I had a Franklin Ace that was in a house fire, was able to restore it and put in a jameco supply.

@AaronHuslage 3 жыл бұрын

You have channeled your inner Woz!

@Dukefazon 3 жыл бұрын

The IC leg straightener is not in the description but it helped me to find that chip lifter you use at a reasonable price. Ahh, this fix was such an adventure, I'm so happy seeing it working.

@datashed 3 жыл бұрын

Thank you sir! Another great video, as always!

@bitoxic 3 жыл бұрын

Excellent work Adrian! 😄👍

@NotSleepy 3 жыл бұрын

Adrian === Love your videos. Great job. Thanks.

@OzRetrocomp 3 жыл бұрын

Another great video, Adrian. Illustrating the chip pinouts as you test them is a really nice touch, makes it super easy to follow. Just one tiny issue... if you watch 32:56 - 32:58, there appears to be a minute amount of movement in the RCA jack. It's hard to pick up at regular speed; it become quite obvious at 0.25x. Because the movement is so subtle, it probably wasn't obvious at the time of filming (as well as being easy enough to miss during editing).

@SixOThree 3 жыл бұрын

That really is one clean motherboard! What a wonderful gift.

@ayushkaushik8794 3 жыл бұрын

He cleaned it, It was dirty when he did get it.

@ayushkaushik8794 3 жыл бұрын

Tho, the gift is wonderful of course.

@DavidPlass 3 жыл бұрын

Wow, I would have given up long before you. Great job debugging and fixing that bad chip!

@dimensiongamer534 3 жыл бұрын

Great video! Nitpick though that stack of floppies you had on the bench was sooooo intriguing I was trying to see the label of the top one for a good 2/3 min lol :)

@musicbrain313 3 жыл бұрын

I love the premise of your channel

@greendryerlint 3 жыл бұрын

I have that same T-shirt. Great fix, BTW, and well explained.

@johnfinn1570 3 жыл бұрын

Congrats Adrian. A pat on the back for you from Australia

@naderhumood1199 3 жыл бұрын

Adrian... You are aptly....did great job Sir ✌️✌️🇧🇭 thank you very much much indeed..

@BreakingBrick 3 жыл бұрын

Adrien Lac!! Le nouveau canal en KZfaq ! Nay, just kidding, hope he get this machine properly working again. And he will!

@Inject0r 3 жыл бұрын

Ah crap! The last video was a real cliff hanger on the end. As is this one! Loved it nonetheless! 😊

@kajyakuzonik9130 3 жыл бұрын

I love these videos!

@SimonZerafa 3 жыл бұрын

Deoxit that Socket! - As always 😀

@KennethPlaysOfficial 3 жыл бұрын

YES

@JackyThamGK 3 жыл бұрын

im your Malaysian view, i like how u fixing the old computer, this is really fun project yo XD cant wait for the part 4 video

@stub1116 3 жыл бұрын

Brilliant video.

@gb7767 3 жыл бұрын

Thanks Adrian, can't wait for the next installment. P.S. For subscriber notifications, make sure the bell is set to "All" (with the ringing marks) as "personalized" doesn't seem to work. If still having issues, set to none and then back to all.

@tahustvedt 3 жыл бұрын

Great stuff!

@ydswd2003 3 жыл бұрын

Love this video!

@ratoone233 3 жыл бұрын

I hit the thumb before watching, I knew it would be great, and I was right ! :)

@siberx4 3 жыл бұрын

32:56 it looks like the crimped RCA ground ring is still spinning in the frame in this shot, I think you got good solder bonding on the frame but not on the sleeve/ring part. Might want to go back and touch that up, otherwise your flaky composite output problems might return!

@TheSulross 3 жыл бұрын

Dang, a repair mini series - like any good mini series it careens through emotional highs and lows. (They will need to add a retro computer genre to the Emmy Awards, then Adrian can enter this Apple II repair series.)

@martinsamuelsson2322 3 жыл бұрын

Love the fault finding well done, really good of you to show the pins you are measuring . @28:00 Is the 8304 a 245 rotated 180 degrees with vcc/gnd swapped?

@brendonelton 3 жыл бұрын

As you were explaining the down shift with the 74LS245 & 8304, i was already visualising a stack method before you revealed... weird.

@kriscoryn5202 3 жыл бұрын

@Adrian's Digital Basement yep Brendon i love it how he explain it but i did the same it is saterday so why not make some piggypack to spare delivery time you can also buy it for $5 www.reactivemicro.com/product/8304/ but that's no fun if you know how its works why not using a replacement

@AlsGeekLab 3 жыл бұрын

Another awesome video done! I could tell your excitement when you got it worked. Well done! How did you find out that the 74LS245 was compatible with the 8304?

@TheMadmagik 3 жыл бұрын

youd just have to change the level on the direction pin so the 245 works in the correct direction. There will surely be an unused gate in a 74hc04 or similar on the board to help you flip the direction signal.

@mdanov 3 жыл бұрын

Nice Frankenchip! It's alive!!!

@radiolabworks 3 жыл бұрын

Great video once again Adrian. Now to completely ask something off topic. Above your work bench is a small display that appears to have different Atari game related displays popping up. Very interesting. I'm sure in a past video you addressed that little gem, but for the life of me I don't recall you mentioning it and yes I watch most of your releases. So 'inquiring minds' (or at least one of them) wants to know just what that is? Thanks in advance.

@Bran-hw1fh 3 жыл бұрын

I Did Some Research and found that the 8304 is pin compatible with the 7304. And weirdly enough an support chip for the Intel 8086 & 8088 processors known as the Intel 8286. So the DP8304/DP7304 & Intel 8286 are all basically the same chips. I sure hope this helps.