I'm no sparks, but I always find your content informative and interesting. Nice to see the detail of a thorough job.

Always love your videos and this is another example of your professionalism.

Many thanks for this video. Most informative. You taught me something with that socket and re-terminating the cable. Thank you for creating this content!

Love how thorough you are with your testing you don't leave anything to chance. Best way to be and if all the sparks did things as well we would all have safely wired homes. Good work mate.

Yet again thanks for taking the time to film and show us all chris 👍

Love the content mate, keep it up. Good to see you talking through things and actually explaining why, how etc.

I was a sparky back in 90s, you are very good at your job. Having a kitchen extension done and needed a reminder how it's wired up. Then had a bit time to watch the rest of your videos.

Superb job Chris.excellent testing.

Great video - at 50 I have decided to retrain and this stuff is training gold! Cheers

Excellent work and thanks for the content stay safe and take care

23:52 i chuckled there... the last batch of EICRs I commissioned was about 4 years ago (due for renewal soon)... the spark (who came recommended and is well reviewed) did a block of 6 flats in less than a day; the building is electric-only too so it's dual boards in every flat with storage/panel heating. great video.

What I have found is people are willing to pay £500 plus for a guy in a suit to basically make sure the house is there, where he will put down that everything requires a specialist to check, that's a so called survey. Yet think it's expensive if an electrician turns up and charges £200 - £300 for an inspection. A lot of these people get what they deserve, because they would have phoned several people for prices and gobfor the £50 merchant, I have seen it to many times, and I have no sympathy with them.

Love these vids, im not even a sparky, but its interesting stuff. 👍

Great honest work Chris. Meggering will actually cook off any water in the cable or enclosure, when the water cooks off the core to core impedance increases.

Good video Chris, I think I'll show this to my potential customers too when they are comparing quotes, I always charge a full day at £300, I get about half of the jobs I quote for but that's fine with me!

I've been on all sorts of prescriptions for Hayfever over the past 10 years (which for me flares up only in May and June). The one 'treatment' though which I've found works best is Vaseline around the nostrils to catch the pollen and a Boots eye spray.

Great video, well explained. Top notch content.

Proper videos, as it is. Thanks dude. :)

Love your Videos mate there brill, I don't really know ought about electrics but there interesting ... Keep up the good work

I fit a 6mm to outbuildings as a minimum, regardless of the run you never know what the next guy is going to decide to install in an outbuilding it’s always best to future proof especially when a cable is being buried. You did the right thing with that 2.5 top man 👍🏻

Excellent video Some great work done there mate and a bit of good advice as well 👍👍👍👍❤️

Have ever thought about doing the ring test from a socket outlet. It saves disturbing the board and is often more accessible. It's also easier to differentiate the two legs and it also counts as a point of inspection.

Great vid as usual pal. I do enjoy watching your content. I'm sure you know already but I don't think you mentioned it, BS7671 does indeed say that greater than 1MOhm is a pass, however guidance note 3 states that less than 2MOhm may signify a latent defect. I haven't carried out electrical work for quite a few years now though, so please feel free to correct me. Keep it up mate. Between you and Thomas Nagy and DSS we can all learn a lot.

I would imagine the fact both ring’s r2 values are higher than expected would be a further investigation. Great informative content 👍

A job done thoroughly is a job well done. The hay-fever gets in the way of everything. I have tried everything to get shot of it, nothing stops it 100%.

So true when testing a ring...praying it's complete!! I feel your pain with the Hayfever...have a word with your GP. They have access to some good antihistamines that don't make you drowsy. Fexofenadine is my current hayfever treatment.

Excellent video.

Well done . Nice to see an eicr done right . Much better than the drive by £60 jobs doing 10 plus a day guys.

Great video mate

“The bloke that did it from the van” I almost died

Chris, nice to see you’ve changed your opinion on earthing the metal back box to the faceplate. I was watching a video of yours made 2 years ago and you said it wasn’t necessary to wire the box to the socket as the screws did the job.

Great job

Will the new tester do type B rcd’s or is it only type A and AC? Just asking as I have come across a couple of type b’s when testing ev installs.

You're a good conscientious spark Chris. But then that's why you don't mind filming yourself at work.👍

Or the 4th bloke, the one who fixes the first socket like that, but finds every conmection to be like that and just gives up hope😂

If Possible Please could I have one of your old consumer units? Love your videos big Fan 😁😁😁😁

This dislikes on this video are from the Drive-By ‘electricians’

Spot on with the comments at the end mate about eicr it's gonna turn into a race to the bottom. People gotta learn you get what you pay for 👍

i hear this the screws earth the switch a lot well not when someone removes the cover ie decorators etc that is the time a lose connection springs into action... nice video

The 6A breaker in 16:00 seems newly added it didn't had that discoloration like the other breakers. Perhaps for a (temporary) light . Outdoors at the door?

Loving your videos Chris. I'd get you round to do full test on our installation if you were nearer to Dorset! Realised the excellent John Ward lives down the road - I wonder if he'd be interested!?

Super vlog.... small place, but loads to see and test. Good to see report software 👍 Do you cross connect test ring final?

Do you do the Vaseline shoved all the way up your nose trick before you go out in the morning then again as u feel it wearing away! It makes my hay fever that much better i barely need tablets..

You and I think the same way Chris. So many defects can be nothing worse than creep or wire broken in the contacts in a switch or socket, or where Mr DIY or "Stetson Electricals" (clue in the hat) have had their grubby fingers on the installation to spoil it. But at least your rings were still rings.

Those '"I'll just fix that, only takes me a minute or so" jobs can escalate badly though! I spent last week in a place where they specified light switches with neons that illuminate when the lights are off, so the switches are easier to find. Mate told me "One neon on the fourth floor doesn't work, even after replacing the neon insert! Have a look, maybe a jumper wire has come loose!" Turned out the jumper had been missing in the first place but the whole setup was so dodgy that I ended up spending more than half a day fixing the back boxes and wiring in two rooms up there. Background story: masonry back boxes on the continent are plastic and have been since the late 50s. They're not flame retardant though, so they have no business being near any timbers. Older boxes were metal but insulated with some kind of tar paper instead of earthed since circuits weren't necessarily earthed back then. Nowadays, that insulation is no longer considered sufficient, so all metal boxes need to be replaced. Dry-lining boxes are flame-retardant but only have a 3-mm lip so the holes need to be quite precisely 68 mm diametre. What I found when I removed those switches was a mix of plastic masonry and metal boxes sunk into huge holes in timber panelling so I couldn't just put in dry-lining boxes. I ended up cutting a 19 mm pine board with holes the right size to cover the original mess. Looks a bit mediaeval but that's the whole point of a castle I guess. I even used hand-forged decorative screws to fasten the boards to the wall. Ideally the whole place needs a full rewire but since the budget is tight that's not going to happen. We're doing one room at a time in cooperation with the local electrician. Should only take 30 years or so.

Last time I lifted a hatch like that there was a wasps nest the size of a washing machine..

Hi Chris, thanks for your various videos. Please could you confirm if the Kewtech 63 plus does 2 lead no-trip RCD test.

like the honest vid, im in france been working here for 7 years but coming back next year just out of curiosity what is the cost now for full EICR like you did in the vid

Love your vids some comments about drive by sparks a bit unfair noticed you said am not taking anything to do with out building surely the client wanted a full inspection does he have to pay more or get another spark !

I’m not a spark but I’ve rewired my house and my mates Butty shop by what I’ve learned watching your videos. 👍🏻

Did you put the 1.59MOhm down as FI because it was less than 2?

Hi chris when testing a ring circuit on an eicr do you do a figure eight test on the line and neutral. Thanks keep up the good work 👍

Great vid thanks for sharing. 🐵

Another awesome video Chris!!! You do such a fantastic job!! I’m a level 2 adult learner and always find your videos really helpful! I hope you don’t mind me asking and please don’t rip me to shreds guys for probably asking a daft question but was the CPC resistance higher than expected on the end to end CPC test at 4:49mins? If the CPCs were 1.5mm2 the expected resistance is around 1.67 times the value of R1 or Rn (so 1.67x0.20= 0.33ohms) but it looked a bit higher during the testing. I assume this is probably higher due to the way the CPCs have been terminated and the state of some of the sockets but I’m just interested in how high the reading would have to be to raise alarm bells? Apologies if this is a daft question and no doubt a tolerance is given in one of the regs but i just haven’t got there yet in my studies 👍

So with the sockets are you just pushing it in and out and switching it until it works then job done? Given reading was high why not just open it and not faf about with the on off in out routine?

That socket on the kitchen work top looks like it’s within the splash zone by the sink Cooker switch looks less than 100mm from the cooker space too but I could be wrong there

Breaking capacity 0.4 I take its been along day and you meant 6k. Or were you on about your disconnection time. Testing from the van joking aside so many out there. I used to call them arm chair testers 🤣🤣

Does anyone carry out the ring circuit continuity test behind a socket outlet ?

We carry out a lot of EICRs, the fault on the sockets are common. I would class that as fault finding and is not part of the EICR, this isn't a criticism for you fixing the fault that's a good thing for the client but in a world of tight margins I would leave it for the fault finding after. Fair enough if that was the only thing wrong with the installation to save a revisit but there are quite often more things to fix so I would advise that the testing be carried out and any observations be recorded. Then agree with the customer any additional costs. I do like the videos by the way.. keep up the good work!

Enjoy watching the video's though even if I've got absolutely no idea what the hells going on. 🤣

What a crap hole! 😂 I see metal clad switches and sockets not earthed with a fly lead all the time. Pet hate of mine. It's prob cheaper to rewire that place than spend days sorting all the dodgy wiring.

hi chris or to anyone else. Should you earth backboxes? i have changed a few sockets in my house to double from single. The single metal backboxes weren't earthed to start with so i followed suit and didnt earth the double metal backboxes. Also the sockets are plastic not metal faceplate ones. thanks

Thanks

For hay fever a guy I work with says that you should buy local honey, since he started to eat honey pollinated in his area, he’s not had hay fever.

Don't you guys use a circuit finder to find branch circuit breakers that are not labeled in breaker box or as you say fuse board?

Very interesting. A 5 hour job you pay for that could potentially save your life or those you love would be a bargain to me, whatever the rate.

"This tester is fantastic",(at time 3:35. Yes, it should be at about GP Pounds 1,600 on Ebay. Certainly massively more expensive that my ordinary ohm-meter (but, hey, it does so much more!!!!).

at 9:38 As that socket has a broken earth connector on the faceplate. (left side) would that not be a fail and need replacing?

Hi just found you. Great video - what software are you using to record the details. Many Thanks

Always enjoy your videos. Keep them coming. What software do you use on your iPad?

R1 Rn test is a good idea also, short circuit currents is a underestimated test imo i like to take my end to end loop readings r1 r2 and divide by 4 for the expected reading i also do a calculation for volts drop of ring lvd=11.5x1000/ib x mvam/4 x ct 1 i use ct 1 correction factor to err on caution this gives me a clue on the length of cable , nice software good call on the socket replacements hope your keeping well mr cjr

Hi m8 just finished my bricklaying nvq do u reckon i should go for a electrocution apprenticeship? Im 18 and really enjoy ur vidios

Great video chris... ive recently bought a hot tub need advice. Would you recommend putting an out door socket outside from a fused spare or would you recommend it coming from the board?? Im not doing it myself reason why im asking is ive had 2 electricians say 2 different things.. one even said he could take it off kitchen supply which i thought be strange

What is the app you used on your I pad 2:09

Whats the test / software you use

Hi Chris what testing software are you using. Tony

Testing from the van. 🙈🙈🙈

We have always been advised to count double sockets as 2 points. Just saying

What app did you use for the testing

Hi, are you using an app to writew down your values on your Ipad?

Just like to add there is some very good women electricians out there too

Just paid £163 for a sparky to do an eicr on a 4.5 year old flat to renew the eicr. I’m all for checks but the latest regs are crazy and should line up with builders. Our flat is now only satisfactory as it doesn’t have a fire rated consumer box. Begs the question why Berkeley’s didn’t install them.

Hi mate, I’m new to being a sparky, what’s the flux capacitance of them MCB’s? And do you set the phasers to milky on your tester?

Hi Chris what is the software your using to record the results please

Hi Chris. Seen a few of your videos now. What is the software package you're using on your tablet/pad

On a fig 8 "R1 + R2" test for Ring finals ( CPC (r1) and Line (r2) crossed) on a perfect ring - shouldn't all outlets give the same reading ? ( that is : a fig 8 test effectively creates a "circular circuit" where each test always measures resistance across a diameter - hence the resistance will always be the same - irrespective of which point ( diameter) is under test

Great job! Technically the grey part of the cable is classed as the sheath, not insulation :-)

What app does he use in documenting the test

What app is that on the iPad? i have thought about going down that route for paperwork

Well.. that's me totally confused..thank God my brother in law is an electrician ... .😵

7:11 for afternoon delight

I know there's a lot wrong with the outbuilding circuit, but what's wrong with 2.5 on a 20A?

So would an EICR test pick up on single insulated tails?

I think the KA rating of the MCB is the number in the box on it, 6000 = 6KA. I’m not sure why they give you daft options on your software for it, or am I getting confused with disconnection times?

What app/website is he using on his ipad?

CHRIS-------Where are the socks???

Again so nice to see proper work, not sure I understand why you let it fail because of only one back box. I would of hoped it got changed by you. I did hear what they wanted but did they really need a fail ?

Didnt do your functional test on that RCD...

Hi chris, love the video mate. What test cert software do you use?

Will this be a job you’ll be doing later?