These two programmers can be found at a price similar to the clones produced in China. I don't think anyone has reason to use those clones anymore. I recommend using original products ! Video for information purposes !
Пікірлер: 91
@vladalexandrucojoc9214 ай бұрын
New grafic with Plus and Minus, even the novice users understands the comparison. I had in mind the fc200 but i didn't buy it, i had writen you about the multiprog and now you made a great video. Thanks for your time that help us to see beter a tool .
@YOYODiagnostic4 ай бұрын
you are one of the subscribers who always posts. I got a lot of encouragement from you. I always try to keep in mind the demands of subscribers like you. This is my way of saying thank you to those who support me.
@medhamoud44923 ай бұрын
We really respect your hard work and your attitude to share that information and your knowledge. I hope you succeed in your life. All my respect
@YOYODiagnostic3 ай бұрын
Thank you. 😊
@vastorana744 ай бұрын
Thank you again for your videos. I bought vvdi multiprog when released and have just seen unbox vids. So glad to see see a video with someone actually giving useful information. Keep up the great work. Very much enjoy what you do. Thank you
@YOYODiagnostic4 ай бұрын
Thanks for your support 👍
@albinoantoniojimenezparril4437Күн бұрын
muchas gracias por este video la compre el otro dia despues de ver tu video ahora queda seguir investigando muchas gracias por tomar tu tiempo en hacer este video muchas gracias y sigue asi ayudas a la gente para seguir trabajando
@Omar-mz2oz3 ай бұрын
Thank you very much ! For your time and for your explanations! All your videos are great ! I was thinking to buy a cg9s12 thanks for open my eyes !!
@YOYODiagnostic3 ай бұрын
👍
@osvaldocostanogueira71714 ай бұрын
Great video, very clear and direct to the point. ❤
@YOYODiagnostic4 ай бұрын
Thanks 👍
@nickmak3162Ай бұрын
Thanks for the video. I’m going to consider the multi prog, I wouldn’t have known about it if not for this video. Also learned about the VCX tool from your other video. Really helps to save money when starting a small business. Thank you
@YOYODiagnosticАй бұрын
👍
@abreiz14 ай бұрын
Perfect timing Yoyo. It is like you heard me as I was confused about my purchase. Always informative, stright to the point and helpful. Keep the good work and Thanks a lot as always.
@YOYODiagnostic3 ай бұрын
My pleasure. 👍
@miqbal1981Ай бұрын
another beautiful comparison👌
@YOYODiagnosticАй бұрын
👍
@HelgiThorisson4 ай бұрын
Great comparison.
@YOYODiagnostic4 ай бұрын
Thanks
@scorcher61721 күн бұрын
You had my support at unboxing videos I hate them always have for the reasons you said if you don’t how it works don’t show me I don’t want to learn with you , I want to know if it works and I like that you show us. Thanks
@YOYODiagnostic21 күн бұрын
@@scorcher617 Thanks for your support 👍
@franciscodiez58254 ай бұрын
Another Awesome video, thanks for sharing! Really appreciate all your videos, always looking forward to the next one. What program/software would you recommend for the checksum?
@YOYODiagnostic3 ай бұрын
I usually use it from the programmer. If I write with Flex i use that. If it doesn't work I go to tuning software. They are the best .
@SpringvisualTk4 ай бұрын
Amazing comparison, thank you so much, I never expected such detail comparing abilities per make!! Please continue if it’s not too much work, I bet you did it since you were curious yourself, I also invest a lot more time when I have personal interest comparing and researching Also, since you compare to FC200, I assume multi-prog does all by bench Feel free to ignore this: how important is checksum correction? Is it worth getting Kess/Flex just for that? (I’m a locksmith and rarely do ecu work)
@YOYODiagnostic4 ай бұрын
Exactly as you assumed, the first time I entered the menu to see what it can do. I don't enjoy talking about a programmer if I don't know what he does. I had 1 month to return it if it didn't cover my need. Thanks for watching 👍
@diyleonmotors103 ай бұрын
Hello YOYO! Thanks for the Video! Another great information. keep up the good work! I have just one question for both programmers. Do the programmers do also a CVN (Calibration Verification Number) Correction when performing the Checksum Correction? CVN is important for the inspection in many Countries now since 2018.
@YOYODiagnostic3 ай бұрын
Hello. Not at the moment. I'm sure VVDI will have this option. This programmer has a good start.
@planetpowersteerings35023 ай бұрын
Thank you for the detailed comparison of the two tools. It is very helpful to have a side-by-side comparison to better understand the features and capabilities of each tool. I am working in an EPS rack repair service and am looking for a suitable tool that has EPS module MCU read and write capabilities. Can you suggest a tool that would be a good fit for my needs?
@YOYODiagnostic3 ай бұрын
Hi, I have no way to answer this question because I don't know which MCU is in these EPS. You should know better what MCUs are and then make a comparison with what these programmers offer.
@daudajalloh6183Ай бұрын
Great video
@YOYODiagnosticАй бұрын
👍
@ucustanbass4 ай бұрын
scripts are included in multiprog or have to buy after? thank you for your time.
@user-tz4oz4vg2o3 ай бұрын
Thank you for your video is very interesting and useful and tell me which one to choose multi prog more coverage works better
@YOYODiagnostic3 ай бұрын
It's up to you. If I have to decide I will go for Multiprog, but it's your money you must decide.
@jaymoney42653 күн бұрын
I think the multi prog is great, but it seems like xhorse dropped the unit, but none of the solderless adapters that are offered with the mini prog and vvdi prog are not available yet. I asked support, but they don't give any answers.
@Deltarom4 ай бұрын
Wish to see a comparison with Flex as well specially for Mercedes. Thanks.👍
@YOYODiagnostic3 ай бұрын
Ok.. I take it in mind and I will make sure one video with Flex too. 👍
@eye-ann49374 ай бұрын
Maybe xtool vs SMOK coming soon?, keep up the good work, thanks
@YOYODiagnostic3 ай бұрын
I don't promise because I don't have Smok. But if I find a friend with this programmer I will.
@jackgates69494 ай бұрын
I use AT-200 (older version of FC-200) and only need for BMW DME ISN reading. Is there any advantage to this new VVVDI for me and my limited needs? Great video and LOVE the accent!
@YOYODiagnostic4 ай бұрын
No reason to buy it. 👍
@jackgates69494 ай бұрын
@@YOYODiagnostic Thank you!!!!
@aboxofchocolates59014 ай бұрын
4:30 The names of the brand are in Chinese character order. I guess it is because the software was developed in Chinese first then translated into English.
@YOYODiagnostic4 ай бұрын
True. All these aftermarket programmers are Chinese companies. (Launch, Autel,VVDI, CG, Xtool, Topdon, Thinkdiag etc.)
@jorgemat8080Ай бұрын
I use the fc-200 and i have a question for you. On a bosch ME7.5 for Audi to do immo off when it asks to load pflash which file do i choose? When i read and save it read eeprom, flash, and extflash. There is no pflash. So i'm a little confused as it loads both eeprom and flash and accepts the file size. Thank you for any advice.
@YOYODiagnosticАй бұрын
This ECU has eeprom ST95040 external you can read separately . Or you can use eeprom ( DFlash) read with FC200
@jorgemat8080Ай бұрын
@@YOYODiagnostic thank you.
@YOYODiagnosticАй бұрын
@@jorgemat8080 👍
@mohamadosman19332 ай бұрын
I need ecu devices and mcu devive So you advice me to buy just multiprog or buy both of devices multi and fc200
@YOYODiagnostic2 ай бұрын
What you understand from this video?
@irfankhalifa56473 ай бұрын
@YOYODiagnostic Can this repair bmw/Mini FRM too?
@Doctor_883 ай бұрын
Im interstend to
@canoaslan10114 ай бұрын
Can you atleast do some unboxing for the fans at Christmas time?
@YOYODiagnostic4 ай бұрын
I promise you I will do unboxing but I will also make a test 😊
@reirizjose4 ай бұрын
Hi, do u know if multiprog can read and write bmw isn in ecu??, thanks
@SpringvisualTk4 ай бұрын
It will read and write, but not modify the data, they are working on custom scripts that can do things like that in a click, but it’s not ready yet. Read, send to a file editor person, write
@reirizjose4 ай бұрын
thanks a lot
@islanddiagnostics3925Ай бұрын
If I had to choose between the HexProg or the Multi-Prog which one would be better?
@YOYODiagnosticАй бұрын
I don't have HexProg. Sorry I can't answer your question.
@siyaonline4 ай бұрын
VVDI Multi-Prog is the best especially when you have an option of reading chips and MCU's and also be able to read immo data
@YOYODiagnostic4 ай бұрын
👍
@alexn.21994 ай бұрын
Can you show differences between vvdi prog and multiprog
@YOYODiagnostic4 ай бұрын
Ok I will post a video soon. I have a video but no time for editing. 👍
@8power04 ай бұрын
YOUR CHANNEL IS REALLY GOOD ,, I LIKE IT FOR THE TOOL COMPARISONS NEW SUBSCRIBER . I HAVE TO WATCH EVERY VIDEO ON THIS CHANNEL AND LOOKING FORWARD TO THE NEW VIDEOS THANKS SO MUCH FOR YOUR TIME !!!!!!!!!👍🏼👍🏼👍🏼
@YOYODiagnostic3 ай бұрын
Welcome to this community 👍.
@filipefernandes7772 ай бұрын
Does the MULTIPROG do what the VVDI prog already did as well?
@YOYODiagnostic2 ай бұрын
Similarly, the only plus is ECU reading and writing
@NGL_Voxify10 күн бұрын
What functionality did you test? Just b/c they have big list means nothing ...fc200 cant do the lot of functions of listed ecus
@YOYODiagnostic6 күн бұрын
@@NGL_Voxify to be able to test all these ECUs I need one more life on this planet. when do you think I can test all the functions myself. I use several programmers and it is impossible.
@NGL_VoxifyКүн бұрын
@@YOYODiagnostic u make fun of people unboxing........what you, yourself reviewing on these units?
@ADDAUTOMOBILESERVICES4 ай бұрын
Pls what do you think about dc706 obdstar
@YOYODiagnostic4 ай бұрын
It's a bit more expensive than Vvdi so I wouldn't have a reason to buy something like that. Vvdi multiprog has a very large database when we talk about Eeprom and MCU. The second thing to mention is that I'm not an Android fan of programmers, I prefer Windows operating systems. To be able to modify those data, I always have to export the data to another device and after modifying it, copy it again. for me this is wasted time.
@ADDAUTOMOBILESERVICES4 ай бұрын
@@YOYODiagnostic thanks boss
@ADDAUTOMOBILESERVICES4 ай бұрын
@@YOYODiagnostic wish you can compare dc706 vs multi prog
@YOYODiagnostic3 ай бұрын
@@ADDAUTOMOBILESERVICES 👍
@vvsousa3 ай бұрын
Hello. Does this program work on airbag?
@YOYODiagnostic3 ай бұрын
Fc200 or VVDI
@vvsousa3 ай бұрын
@@YOYODiagnostic If the vvdi does rest in airbag. thanks
@YOYODiagnostic3 ай бұрын
@@vvsousa will be a next video. 👍
@alexsandrolopes33882 ай бұрын
Muito bom seus videos as explicações me fala cg100x e um bom programador cpmrei multiprog poderia fazer u. Video sobre cg100x obrigado
@YOYODiagnostic2 ай бұрын
👍
@AsadGamer4 ай бұрын
Great video But a great advantage for fc200 for mercedes benz. The vgs-nag3 9g tronic that vvdi multiprog doesn't have. I hope it gets added in future updates to vvdi
@YOYODiagnostic4 ай бұрын
👍
@Unbekannt-ov5gb3 ай бұрын
Multi prog kann kein med Steuergeräte lese bereits ausprobiert 😢😢
@YOYODiagnostic3 ай бұрын
Danke für Info. 👍
@Unbekannt-ov5gb3 ай бұрын
@@YOYODiagnostic bitte heute kam ein Update runter und ich konnte med 9.1 lesen davor war es nicht möglich
@YOYODiagnostic3 ай бұрын
@@Unbekannt-ov5gb 👍
@mohamaditani4513 ай бұрын
i bought fc200 2 days ago :(
@YOYODiagnostic3 ай бұрын
It's a good programmer too 👍.
@mtcarcare90772 ай бұрын
Which is best tool for read write of this ecus bosch md1cs08 &delphi dcm7.1ap &2.7ap&2.5