Sehr schön gefahren! Gibts auch Videos von dir auf der neuen Strecke?

I always buy at hk-modellbau.com or at rc-kleinkram.de.

I´ll ask Felix, maybe he can comment here :-)

Hello Dave, here's a list of my option parts in the order of the instruction manual: 335030 steel diff satelitte gears 335080 steel diff pin 324101 slipper eliminator for stock 323043 alu rear roll center holder 323355 alu rear uprights 362472 1.2mm anti-roll bar AM640214 titanium turnbuckles 322312 brass front suspension holder 26 322572 alu steering plate 322510/12 alu steering arms 322042 alu front roll center holder 322292 block-extension 0-slot 365361 -1.25mm front hex hubs 368293 3dot rear springs 321190 front wing holder 323512 front wing 323517 rear wing Tec 1.0mm 296530-K alu nuts M3 293499 alu servo horn These are the option parts I'm running on carpet, you could probably also use the shorter chassis plate (321109) and the lightweight body (329708) but I haven't got those yet;)

- Thanks Felix, much appreciated. I'm considering buying a XB2 '20, my existing car is the XB2 '16 so I it will be a big improvement! Did I hear you say use 10k in the diff? How many satellite gears, two or four? Vielen danke.

@@gaskelldave Yes in the video I said 10k but now I'm running 20k with stock on carpet and always with 2 gears in the Diff. You must keep in mind that you'll need the steel gears and pin because the plastic ones are going to brake immediately with 2 gears.

In Hamburg, Germany

Wir fahren alle 13.5t

@@RConmyMind der geht aber ordentlich ab für 13.5

Ja, die 13,5er sind heutzutage echt schnell und für so eine kleine Strecke reicht das völlig.

@@RConmyMind Welches Ritzel nehmt ihr dann?

​@@rc-dreams Ich fahre bei meinem Associated B6 72/28 = 6,69, wäre dann beim XB2 75/30 = 6,625, aber muss natürlich immer der jeweiligen Strecke angepasst werden.

Das kann man laut sagen!